Find a Shop Fitter you can trust in Redruth.

1. If you’ve not got an overhang or it’s a fixed deck, fit starter clips along the outside edge of the frame and secure with screws provided with the composite decking. If you are working with an overhang, put the first board into position not exceeding 25mm. If you’re adding a fascia, put an off-cut of board under the overhang so you know it’ll be flush with the fascia.
2. Pre-drill all fixing points, measuring in 30mm from the edge of the board. Secure the board to the joist below with composite decking screws.
3. Slide a hidden fastener clip in so it sits within the groove of the deck board. It needs to be in the centre of the joist to keep the boards secure and ensure an expansion gap of 6mm. Tighten the clips until just tight, and repeat so there’s a clip at every joist.
4. Add the next board, ensuring that the fastener clips sit within the groove – make sure you don’t force it. Repeat step 3.
5. Continue steps 3 and 4 until you’re at the final board, which you should secure in the same way as you did the first.

Most responsible contractors will dispose of the old fencing via an approved commercial waste site. Do check that the cost of taking rubbish away is included in the quotes you receive, otherwise you might find you get stung when it comes to paying for the work.

How To Build A Conservatory

Conservatories are a perfect means of creating an extra living space within your home. They can serve various purposes which includes serving as an avenue to entertain guests, a playroom for the kids and can even be used as a home office, they’re able to open up your property without having to break the bank for the highly expensive renovations. So if you wish have a conservatory constructed in your home, it’s either you do it yourself or hire a professional. Doing it yourself will help you save some money but can also end up disastrous. So if you lack the confidence to undertake this project by yourself, then it’s strongly recommended that you hire a professional who can guarantee the best results. In this guide, you’ll discover all steps required to build your own conservatory.

✓ The Base. Due to its durability and cost, concrete happens to be the most used material for conservatory’s base. Firstly, measure the enough area to accommodate the conservatory. Dig at least 1 metre deep and ensure it’s level. Fill with damp membrane and pour your concrete mixture in evenly till it reaches level ground. Once done, make sure that the base is totally dry before erecting the conservatory

✓ Building. Basically you can start by constructing the walls and ensure that they’re sturdy and secure, putting into consideration their measurement.

✓ Roofing. Good news here is, DIY conservatories will already come with the roofing in place, so you won’t have to bother about this stage when building. They usually come with an acrylic roof which is easy to install and maintain.

✓ Flooring & Finishings. Starting from the roof, ensure that there’s sealant on all areas where air can pass through. For the flooring, you’ll have to choose your patio slabs or tiles to go outside of the structure. You can apply these with a thin layer of concrete or onto screed flooring.

If your deck isn’t going to be flat to the ground, it’s a good idea to have some kind of balustrade to avoid any tripping. If the gap between the deck and the ground is less than 600mm, use a 900mm balustrade. If it’s higher than 600mm, the balustrade should be 1100mm tall.

With the ability to add approximately one third of your existing living space ( by converting your old, unused attic) to your home or property without having to let go of your garden, it’s quite easy to see the reason why loft conversion has rapidly grown to become one of the most popular home improvements in the UK. However some homeowners usually shy away from the idea simply by looking at the perceived high cost of carrying out such a project, despite several researches showing that loft conversions offers the best rate of return on initial investment when compared to the other home improvement projects. So exactly how much would it cost to carry out this project?

Just like several other home improvement projects, the cost of a loft conversion varies greatly depending on a wide range of influencing factors. These factors include the size of your home, how old your home is as well as the quality of the fixtures and fittings you want to install. For instance, a high end bathtub alone can cost you thousands of pounds, meanwhile you can also construct a full bathroom suite on just a couple of hundred pounds. However, to give you an idea of the minimum cost of a loft project we’ll look at the most popular types and the minimum cost of each.

✓ Internal Loft Conversion - The most affordable type of loft conversion tends to start from £25,000 and above.

✓ Dormer or L-Shaped Dormer Loft Conversion. These are the most popular types of loft conversion. Dormer price tends to start from £35,000, while the L-shaped dormer starts from £45,000.

✓ Mansard Loft Conversion - This involves replacing the entire side of a sloping roof with a vertical wall and flat roof. It requires a planning permission. The type of loft conversion usually starts from £45,000.

✓ Hip To Gable Loft Conversion - This usually starts from £50,000.

Also commonly referred to as a consumer unit in recent times, a fuse box is responsible for controlling and allocating of the electricity in your home. They hold the power any time there’s an overload in one of the circuits which in turn, prevents fire as well as electrical damage. Fuse boxes are often incorporated in homes but consumer units are very rapidly replacing them. Therefore, when your fuse box breaks down, it’s always a smart decision to replace them with consumer units due to the fact that they’re safer and also comply with building regulations while also being a lot easier to use. If you’re extending your home, upgrading to a larger capacity model enables you to make use of more power with the power overloading. In this post, we’re going to cover the amount you’re expected to pay to replace or install a new fuse box or consumer unit as well as the factors that may affect the cost.

For a 10 way dual RCD consumer unit, the typical cost range will be between £250 to £600, meanwhile 15 way dual RCD consumer unit should cost within the range of £300 to £700. Overall, the smaller the house, the fewer the circuits that’ll be needed, hence the difference in the aforementioned prices.

There a number of factors that can affect the cost of replacing a fuse box. These factors includes the the size of the house in question ( the bigger the house , the more the circuits there are and the bigger the fuse box needed), the location ( for instance, places like London where there are higher demands are likely to be more expensive than other regions ).

• Where in the country you live
• What colour you choose
• What pattern you choose
• Whether you choose a standard or a higher-quality concrete

Ponding is where you see pools of water appearing on your flat roof. Unless your roof is leaking or showing other signs of damage, you don’t need to replace it. When you do have your flat roof replaced, tell the contractor so they can find out the cause of the ponding.