Find a Shop Fitter you can trust in Ballyclare.

There are a few reasons you may need a new fuse box. This would include: The box being old or out-of-date, Insufficient or no RCD protection, Holes or gaps in the casing, Not compliant with legal specifications. An electrical survey will ascertain if one is needed.

You don’t have to, especially if you’re on a budget. If you’re only replacing some, it’s a good idea to get all the windows on one side of your property replaced at the same time, so they all look the same. Be aware, obviously, huge savings could be had by having a number of windows replaced at the same time.

You should make sure that all signs of damp have gone before you redecorate your walls. If you want to paint your walls with a water-permeable emulsion paint, you can usually do this after 1 or 2 months. For other types of decoration you should wait longer.

Garden slabs are a joy to behold but only when done the right way. Well, the installation of paving slabs shouldn’t be exceed digging a little here and there, buying a small amount of mortar and pressing down the garden slab, right? Absolutely not! But we must admit how great it would have been if only it were that easy in real life. Let’s be honest, in reality, laying garden slabs does not only require you to prepare your sub-base painstakingly and mix your mortar using the appropriate materials, but you’d also have to work with accurate and precise paver placements to guarantee the patio’s longevity. Consequently, this happens to be a stressful and quite tricky challenge. If you lack the required confidence to pull this off, we’d recommend you hire the services of a seasoned professional who can guarantee the best results and also save you time and extra cash that may result from possible costly errors. In this guide, you’d gain more insight into the garden slabs laying process.

To get started, you’ll need sharp sand, cement, shovel, wheelbarrow, pointing trowel, rubber mallet, spirit level, jointing compound, hard-bristled brush and tarpaulin.

1. Mix a layer of mortar for each paver.
2. Apply the mixed mortar onto the sub base by using the trowel.
3. Slot the first flag in place and ensure not to stain the paver’s surface with the mixed mortar.
4. Using a rubber mallet, carefully tap the paver to the mortar bed. Once done, ensure the surface is even with a spirit level.
5. Take a measurement of the gap between the pavers
6. Repeat the above steps until all pavers have been perfectly laid
7. Leave the pavers to dry for about 1 to 2 days. You can protect it using a tarpaulin if concerned about rain.
8. Use the jointing compound to fill up the paver gaps to bind together the pavers. Ensure to wipe off any excess compound using the hard-bristled brush.

Some floor tiles are so lovely you just can’t help but wonder if it’s safe to be used on the walls as well. If you’re also thinking along the same line, you’re not alone! Several other home and property owners are busy finding answers to this particular question. Now let’s look at the possibilities.

Generally, any tile designed as a floor tile by the tile manufacturer can also be laid on the wall (vertical surfaces) as well as countertops. Due to the fact that the floors are usually subjected to greater use than the walls in terms of foot traffic, the durability required is also considerably greater. Therefore, a floor tile with Abrasion Resistance values ranging from I - V is suitable for wall installation. However, you should take note that exterior wall applications must be different from its interior counterparts and must only be incorporated on tiles that are frost resistant.

There are two other factors that must be taken into consideration before you install a floor tile on your walls which includes the weight of your tiles per m2 as well as the strength of the surface in which the tile is to be installed. If you don’t want your tiles falling off, the combined weight of the tiles with the adhesive and grout should not be more than the maximum weight required per m2 (20kg to 35kg depending on the wall substrates).

Now that you have an idea of the possibilities of installing floor tiles on walls, it must, however, be said that reverse is the case when it comes to installing walls tiles on the floor. Wall tiles are, generally, not suitable to be laid on the floor as they are mostly non-vitreous ( cannot withstand excessive impact, abrasion or thaw cycling).

Does A Conservatory Add Value?

if you’re looking to get a new conservatory built in your home or you’re moving into a new home that features a conservatory, it’s understandable if you’re wondering whether or not a conservatory adds value to a property.

Adding a conservatory to your home will not only create additional space, but it’ll also add value to it. When the right style, fit and shape is chosen, your conservatory can become an asset that’ll be well worth the investment when you want to dispose your home or property. Generally, a conservatory is estimated to add about 7 percent value to a home as stated by a popular property personality Phil Spencer. However, the correct level of the value it adds will be based on how well your conservatory is built as well as well it matches with its surroundings. As a result, when building your conservatory, it’s crucial to make sure that the new living space fits your home perfectly well in such a way that it showcases your property’s style of interior in order to create continuity.

When building your new living space, the first thing to do is to determine the best place for the structure to be placed. This should be given your total consideration because conservatories that look out of place can actually end up causing more harm than good like reducing the value of your property, as the potential investor may see it as more of a burden pr something that needs to be fixed.

If you choose a conservatory that perfectly suits the rest of your home and also creates value by allowing you derive maximum benefits from your garden, it’s likely to be a hot cake amongst potential buyers.

It can be rather hard to identify whether woodworm are energetic or whether the damages and also holes are historical, particularly if you buy a product of antique furniture with indicators of woodworm, or if you move right into a new location as well as find some indicators of woodworm. Apart from searching for as well as determining live or dead bugs the major methods of informing if woodworm are energetic are:

• Fresh cleaning or frassing under or beside the holes
• You can see light coloured timber in the holes, which have sharp edges
• Edges of wooden light beams as well as joists are breaking away to reveal fresh, light timber beneath

The hardest part of the procedure is to appropriately diagnose if activity is present or historic so to start with there are some simple indications:

• Brand-new exit openings in timbers, the shapes and size will certainly additionally identify the type of timber uninteresting beetle. The most typical, which is usually refered to as 'woodworm', is the usual furniture beetle (Anobium punctatum) as well as this leaves a rounded hole 1-2mm in size. It does depend on the type of timber however a brand-new opening is often 'intense' with a typical new wood colour where as an older opening might become dark as well as much less smooth.
• Dirt, noticeable bore dirt called 'Frass' listed below the holes is usually the simplest sign of activity as aged dirt will blow away over time. Again the shape of the dirt can additionally aid identify the kind of beetle, Deathe watch beetle dirt has little 'bun' designed pellets noticeable to the naked eye.
• Actual Beetles, on occasion you will certainly locate dead beeltes specifically on window sills as many emerge from springtime to the end of summer though its the Larva that cause one of the most harm with some kinds living and feeding for several years within the wood.
• Crumbling hardwoods, this will certainly most commonly take place on floorboards as they have a tendency to be thinner than roof lumbers or joists and also will escape to the touch.

These are the most convenient signs of activity though there are expert examinations that can be finished most are not cost effective, the dampness material of the lumbers can additionally be an indicator as to whether infestation might take place as fairly completely dry timber will certainly not be susceptible (this would need a deep probe examination).

As with every home development project, a home makeover comes with heaps of preparation and, hard work, but it is a remarkable way to breathe new life into an old home.

RESEARCH PERIOD FEATURES AND SAFEGUARD THEM

Get to know your household better, the time it was constructed in, and the kind of individuals who would have lived there. The greatest tactic is to repair current structures, make the house dry and safe.

CHECK FOR RENOVATION RESTRICTIONS BEFORE YOU START

There are certain restrictions that don’t allow you to remodel your house after a certain extent, it should be made clear to you when you purchase the property but if you are unsure about the regulations you should check them up, as it is a criminal offence to carry out unauthorised work to a listed home. Restrictions in Conservation Areas generally affect only the exterior of the property as the intention is to ‘preserve or enhance the character or appearance’ of an area, but the right to develop your house will be affected. This means the kind of work that you could have easily completed in a different location may need certain planning and even permissions to complete in your area.

CREATE A DESIGN FOR YOUR HOUSE RENOVATION

It is very important that you take your time to perfect the design. This will help to ensure that the finished work is in tune with your needs. You will also need to figure it out how the changes might play with the original building.

FIND THE BEST CONTRACTORS FOR YOUR RENOVATION

If you are planning on managing the renovation project yourself, it is advisable to ask from friends or family who have renovated their house before and have undergone a similar experience. They can help you find the right architect and builder. Or else, you can always opt for a project manager.