Find a Shop Fitter you can trust in Chester Le Street.

Wet rot simply refers to the decay of timber caused by high moisture levels. This natural decay occurs when the moisture content in timber is about 30 percent to 50 percent. This is opposing to dry rot which only occurs as a result of a lower moisture content of about 20 percent. Naturally, a fungus is attracted to very damp wood, which it feeds off and in turn, destroying it. There are a number of fungus types, however the most common type is Coniophora puteana (also referred to as cellar fungus). In general, wet rot is usually confined to a localised damp area and does not spread which makes it a lot less destructive when compared to dry rot. However, if left untreated or totally ignored, wet rot can be just as destructive as dry rot and can greatly reduce the structural strength of the timber thereby causing a major structural damage in the process. So, what causes wet rot? Let’s take a look!

First and foremost, it must be stated that wet rot would be non-existent without a damp area to grow and thrive as wet spores are attracted to wet timber with a high level of moisture content. This moisture can be as a result of a number of issues which includes defective plumbing, leaking gutters, leaking roof, broken pipes, leaking washing machine or a leaking shower tray or bath. When the moisture a timber is exposed to is excessive, this offer the perfect environment for the growth of wet rot as it enables fungal spores to germinate and grow. They use the wet timber as a food source and eat it away, leading to a weakened wood and a compromised structural integrity.

Various studies have suggested that CCTV is an effective deterrent against home burglaries. In the event that a crime is committed on your property, well placed CCTV means you’ll have the evidence to help the police. It has been recorded consistantly that since CCTV systems have been installed, localised crime has fallen and has lead to more arrests.

Yes, although pest control products available to the public are usually only suitable for dealing with very small pest infestations. If you have a nest or persistent pests, it’s best to contact a pest control professional. They have access to more suitable products.

There is no set guidelines for rewiring your property however if your house is more than 20-30 years of ages it would certainly constantly be best to get an EICR accomplished to determine the problem of the electrical installation. If you are most likely to be accomplishing a great deal of repair works such as a brand-new kitchen/bathroom/extension this might additionally be a good time to have your house rewired as every little thing might then be done simultaneously

Modern wires is PVC covered, PVC shielded and copper is made use of for the conductors. It lasts for years. At once in the 1940s and 1950s cables were made using rubber as well as this wires was known to be harmful. Rubber protected as well as sheathed cable came to be dry and also weak, especially if it obtained very warm under hefty use, and also the threat was the dry as well as breakable rubber made use of to break away from the conductors leaving revealed live wire. This caused fires and also fatal shocks if touched. Modern PVC electrical wiring does not struggle with destruction this way so the requirement to rewire is somewhat lowered.

If you’re planning to acquire Sharps fitted wardrobes, one of the first few things that comes to mind is the cost to make such an acquisition. Generally, prices of these items can vary significantly. However, you should note that the more affordable end of the spectrum is most likely going to be around £750 to £900 per lineal metre, while mid range Sharps fitted wardrobes are usually within the range of £1400 to about £1600 per lineal metre. And finally, the high end customized Sharps fitted wardrobe are possibly going to be within the range of £3000 to £3500 per lineal metre.

The price of the Sharps fitted wardrobes is mainly determined by the fitted wardrobe solution your opt for. So let’s look at the estimated price range of Sharps fitted wardrobes depending on the styles you want for your home or property.

✓ There are the stylish, mordern sliding doors Sharps fitted wardron=be with mirrors that’ll make your room feel a lot bigger. If the type you opt for possesses three sections, then you’ll should expect to pay a price within the range of £2800 to about £3600 to have it fitted depending on the size of the room as well as the chosen finishes.

✓ Handcrafted, bespoke fitted bedroom wardrobe. This will cost about £2500 to £2900 with simple design details but the price can increase with ornate features like mouldings etc.

✓ Large bedroom 3m 80ccm three sections six door. This normally features finishes on both the interior and exterior as well as hanging space for clothes. It’s usually around £4900 or more.

✓ Simple two section closet. The price of this fitted wardrobe is usually within the range of £3200 to about £3500, but it could also be more depending on the design details you wish to implement.

How To Plaster A Wall

In order to plaster your wall successfully, you’ll firstly need to get the appropriate tools and materials for the job in place. The tools you’ll need to have includes a trowel and bucket trowel, plasterer’s float, corner trowel, hawk board, two buckets, mixing stick or a paddle, adequate plaster, PVA , dust sheets, clean water, sandpaper, stilts or step ladder as well as a dust mask.

✓ Prepare the wall. You’d have to make sure that you lay down a dust sheet so as to protect your floor and also gather any possible spillage or debris of plaster, before you start working on the walls. Get rid of all the dirt, dust and debris as this is very important for the success of your project if you’re going to be plastering on a worn out and old wall. Also, cover the holes and cracks in the walls with a screen tape

✓ Apply PVA to the wall. This will help ensure the layer you’re using will not dry out at the same time.

✓ Mix the paster. Mix the plaster according to the instructions given in the manufacturer’s manual.

✓ Apply the plaster onto the wall. Upon cleaning of the walls and successful mixture of the plaster, the next step is to apply the mixture to the wall using the hawk board, trowels and a floating tool.

✓ Skim and smooth. After the the first coat has dried after waiting for about 30 minutes, the next step will be to wipe out the bumps and lumps using a trowel to smooth over the surface. Once this is done you can then scrape the wall with a devilling float.

✓ Apply the second coat of plaster

✓ Apply the finishing touches. This includes polishing your work by adding some water to the surface with a spray gun and using the trowel to further smoothen out the surface.

✓ Painting and wallpapering.

How Many Solar Panels And Batteries Do I Need?

Are you presently considering adding a solar system to your home? With several homeowners in the UK using solar now, many more are realizing the numerous benefits they stand to derive by getting one. Therefore, if you’re thinking about adding the system to your home but do not know where to start, you’ve come to the right place.

Here, we’ll help you calculate the number of solar panels and batteries you’ll need to power your home. Starting from the panels, you can begin by taken into account everything that makes use of power in your home to get a good idea of how many you’ll need.

• Firstly, you’ll have to determine the number of watts you use. Simply go through your utility bill for kilowatt-hours (kWh). This varies amongst homes and being able to identify your daily average energy usage will assist you in getting your solar needs.

• Secondly, you have to determine the peak sunlight hours - having in mind that the solar panels only work when under direct sunlight. Once determined, you can then multiply the figure in hours by your home’s hourly energy usage and divide by your selected solar panel’s wattage.

Generally for a 1500 square foot house, you might need around 15 to 18 solar panels to cover the house’s electricity.

Meanwhile for batteries, there are also some factors to be considered to determine the number of batteries you’ll need for your house. These factors include your home’s power or electricity usage, the period of time in which the battery will be used as well as the battery’ specifications. Once done, you’ll be able to calculate the number of batteries required by your home.

A sudden appearance of graffiti on your property carried out by some vandals can be a real concern. Since you know it’s your responsibility to have it cleaned, the question becomes would you rather call in a professional or have it cleaned yourself. While calling in a professional may be costly, removing graffiti by yourself won’t be easy either especially if it’s done on brick. Bricks are known to be porous which enables paint to sink with ease inside all of the surface’s grooves. Unlike wood, they can’t be scraped and if it happens to be an internal wall, it can’t be sand- or water-blasted. So, what is the best way to remove graffiti?

Well, your best bet would be to incorporate chemical and gel masonry stripper. And while stripping of the surface is not a complex task, it does involve a number of applications of stripper and multiple scrubbing which makes it very time consuming.

Basically, a fresh and wet paint should be soaked up with am absorbent material without wiping the paint in order to spread the stain. Once done, you can then proceed to apply a suitable solvent like white spirit. After this, wash the area using a degreasing agent taking care in the disposal of the run-off material.

With dried paint, simply scrape off the paint as far as possible and apply a paint removal using the following steps:

• Put on your safety gear like a face mask, safety googles and gloves.
• Apply the paint stripper over the brick wall with a brush starting from a corner at the top of the wall and then working outward and downward.
• Leave for the specified amount of time by the manufacturer. Then start to scrub off the masonry paint stripper beginning at the top of the wall again. Remove as many paints as possible.
• Use rags and warm water to wash the wall and allow it to air dry.
• Repeat the process over again to remove every form of stubborn paint that’s left.
• Use a white vinegar to spray the stripped wall and wipe off any residue of paint with a brush and rinse with water.