Find a Shop Fitter you can trust in Newton Aycliffe.

There are a few visible signs of damp, although it often goes undetected. However, in older or empty properties, this made become detectable through its smell. These include peeling paint and wallpaper, crumbling plaster, mould growth, black spots or spores on walls and ceilings, and rotting skirting boards and flooring.

Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.

Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.

It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.

Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.

Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.

Artex usually needs 12-24 hours in a well-ventilated space to dry completely.

How Much Should I Pay A Handyman Per Hour?

Are you about to hire the services of a handyman and probably wondering how much their services cost per hour is? Well, you’re at the right place! The price to be charged by a handyman typically depends on the type of work being carried out, but it’s usually within the range of £20 to £30 per hour. Another typical handyman pricing is project pricing rather than charging of a hourly rate. So when you’re being charged based on the project, you can also ensure to ask for possible discounts as there are often discounts available for larger quantities of jobs or tasks that can be completed one after the other. For smaller, one-off jobs there’s a likely possibility for a minimum charge to surface. As a result, you can expect to pay a premium for the first hour of a handyman’s professional service but a smaller charge for subsequent hours after the first. This is mainly due to the fact that a handyman will need to travel to deliver a service and it’s generally going to be a lot more economical to arrive on the site and take on a couple of tasks sequentially.

There’s a couple of varying handyman’s pricing strategies which is important to be aware of before moving forward. These includes hourly rate, charging by project as well as regular discount or bulk discount. However, if you’re loyal and stick to one handyman, they’ll generally reward your loyalty by looking at your best interest when it comes to the pricing of your projects. This showcases the obvious economy in dealing with one handyman over time and as you build a solid relationship, they’ll also get to know more about you and your projects which will enable them finish the tasks more effectively and efficiently.

Scaffolding, also known as scaffold or staging, is an impermanent construction used to provide sustenance to a work crew and materials to help in the erection, upkeep and mending of structures, bridges and all other man-made constructions. Scaffolds are extensively used on site to get access to altitudes and parts that would be otherwise hard to get to. Hazardous scaffolding has the potential to result in demise or serious accidents. Another major use of scaffolding is in modified methods for formwork and shoring, concert stages, grandstand seating, access/viewing towers, ski ramps and art projects.

There are five main types of scaffolding today. These are Tube and Coupler (fitting) components, manufactured segmental system scaffold apparatuses, H-frame / facade modular system scaffolds, timber scaffolds and bamboo scaffolds.

Each type is made from numerous components which every so often include:

• A base plate or jack: It acts as the scaffold’s load-bearing base.

• The upright component with its connector joins.

• The ledger: The horizontal brace.

• The transom: It is a horizontal load-bearing component which helps to hold the batten or the decking unit.

• The brace diagonal.

• Cross-section bracing component

• The batten or the board decking component: On which the working platform is made.

• The coupler: A fitting which joins components together.

• The scaffold tie: It is used to tie in the scaffold to structures.

• The Brackets: It is used to extend the width of working platforms.

Particular machinery used to support in their usage as a provisional edifice often comprises of heavy-duty weight-bearing transoms, ladders or stairway units for the ingress and egress of the scaffold, beams ladder/unit types used to span obstacles and rubbish chutes used to eliminate undesirable constituents from the scaffold or construction development.

The European Standard, BS EN 12811-1, stipulates performance necessities and procedures of physical and universal design for access and working scaffolds. Requirements specified are for scaffold constructions that depend on the adjacent erections for steadiness.

How Much Is A Landlord Gas Certificate?

Do you know as a landlord in the UK, not only does the law requires you to conduct an annual check on all your gas appliances and chimney, but you’d also have to pay for it? Hence, giving birth to the commonly asked question, how much is a landlord gas certificate? With so many variances in CP12 certificate prices everywhere, it can be so confusing knowing the actual one you’re expected to pay. Just by surfing the internet alone you’d come across loads of ads claiming they can help you with a cheap gas safety certificate only to discover that reverse is the case when you reach out to them. Here, you’ll get to know the real amount you’re expected to pay for the annual checks on your gas appliances and chimney.

First and foremost, let’s look at what a Gas Safety Certificate really is. This is a certificate that’s given out to landlords and property management companies after a check has been carried out on all their gas appliances and chimney. This statutory check is expected to be done every 12 months to ensure the safety of all those who make ue of your rental property. Homeowners living in ther property are not required by the law to conduct annual gas safety check, but it’s highly recommended that you get in touch with a Gas Safety engineer to ensure the safety of both you and your loved ones.

As a landlord in the UK, to get all your gas appliances and chimney inspected by an approved Gas Safety engineer and obtain your Gas Safety Certificate, you’re expected to pay within a range of £55 to £65. However, you should note that this cost will increase depending on the number of gas appliances you have (about 30% increase for each additional gas appliance).

1. Using a rubber mallet and a strong pallet knife, remove the beading around the window. You might think they’re part of the frame, but they’re actually separate on the inside of the frame and can be taken out by using pallet knife to prize them out. Start with one of the longest beads first and leave the top bead until last.
2. Give the glass a little tap to loosen it if it doesn’t come out straight away, then the whole unit should slide out easily. Just make sure it falls towards you and not back out onto the ground below!
3. Clear any debris that has found its way into the frame with a brush. Add spacers at the bottom of the frame – these could be pieces of plastic.
4. Get your new sealed unit (make sure you measure the glass before you buy one so you know which size to get) and carefully take it out of the packaging. Look for the British Standard mark – that shows you the bottom of the glass.
5. Lift the glass into the frame, starting with the bottom first, and make sure that it fits square in the frame before taking the spacers out.
6. Use a little washing up liquid to spread along the beads to make it easier when you slide them back into the frame. If they simply push and clip back in, you can use something like a block of wood to help you push them in correctly. Put them back in reverse order to how you took them out.

How much energy a solar panel produces depends on its manufacturer and exposure to the sun. A good-quality solar panel typically has a power output of about 300 watts per hour, but this can vary from about 240 to 360 watts. How much energy your solar panel will produce per day depends on how many hours of unshaded daylight it’s exposed to.

Here’s an idea of how much energy you could expect a large commercial solar panel installation to produce in a year.

Solar panel system size, No. of solar panels, Annual electricity output

11kW, 44, 9,350kW

20kW, 80, 17,000kW

30kW, 120, 25,500kW

40kW, 160, 34,000kW

50kW, 200, 42,500kW