Find a Shop Fitter you can trust in Buckfastleigh.

If you have a conservatory constructed on your property, then you should be able to to tell how uncomfortable it can get considering the UK’s harsh climate. This climate can get swelteringly hot during the summer months and also quite chilly during the winter months. As a result of being constructed with so many plain glass, conservatories are usually at the mercy of the weather outside which often limits the usage of the structure to only a few months within the year. Hence, the need to have an air conditioning system installed by a reliable professional so as to ensure you enjoy your conservatory all year round. In this post, we’re going to consider some of the benefits you stand to derive by hiring experts to install your conservatory’s air conditioning.

• They possess the experience, skills and tools necessary to complete the project. When the construction job done right the first time, this will go a long way to save you both time and money on potential costly mistakes if you decide to undertake the project yourself.
• They can help keep your project on budget. When it comes to fitting appliances like AC systems, it’s usually very easy to go over your budget when done alone. Since expert conservatory air conditioning installers are vastly experienced in the field, they know the cost implication for the task and can help ensure you don’t overspend or go over your budget.
• They’re insured. The benefit of hiring an insured professional can’t be overstated. What this gives you is total peace of mind knowing fully well if anything goes wrong during the installation process, you’re fully covered by the expert’s insurance company.

If you’re looking to warm up your household to ensure your comfort all year long, there are actually a wide array of heating systems out there that you can put into consideration. However, in this article, we’ll be taking a look at gravity feed boiler and how it works.

A gravity fed heating system is basically an all water based hydronic heating ( both hot water and steam) that makes use of the natural gravity attributes of heated water as well as water vapour to distribute energy. Normally, this type of heating system possesses a cold water tank in the house’s loft or attic with a boiler on the ground floor as well as a hot water cylinder which is usually somewhere between these two components.

In the event whereby there’s a call for water, the boiler is going to fire up and warm a large volume of water. And due to the fact that cold water is a lot denser than the newly heated water, it’s able to drop down to the boiler. Subsequently, the heated water is transported up to the hot water cylinder from where it is forced out and distributed to the hot water taps. If there happens to be a heat request during this period, the heated water will be transported to the radiators with the help of a pump. As a result, when it comes to gravity heating system, it’s simply impossible to have heating in the absence of hot water. this is of course unless you’re making use of C Plan which features 1 zone valves alongside 6 wires. These kind of system are, however, usually operated by programmers that automatically switch hot water on any time there’s a heat request.

Can You Plaster Over Artex?

The short and simple answer to this question is yes, you can plaster over Artex. However, you must also note that plastering over Artex may not be the best choice as Artex is porous and as such, you’d have to detach the stripping so as to get a smooth and even coating. In the event whereby your ceilings or walls have Artex on them, you’ll have to smooth the Artex in order to obtain a plaster of solid coat.

✓ Preparing Artex for plastering. First and foremost, you’ll have to detach any bumps before you can plaster over the Artex. Do note that you don’t have to completely remove the Artex, all that’s needed is just enough to get a coat of plaster. Make use of a scraper to get rid of the bumps on various Artex designs like swirl and bark. Once you’re through getting rid of as much bumps as possible, there’s the need to seal the Artex due to the fact that it can absorb the moisture out of the plaster which will cut the time to get a good finish to little or nothing. You can use a PVA and water mix to do the job!

✓ The PVA mix. This is done to seal off the porous Artex in order to stop it from absorbing moisture from your plaster which can make it start to crack and crumble. To do this, simply mix half PVA and half water, then use a brush to paint the mixture over the plastering area. Once done, you can give the plastering surface about two to three coats and wait for the solution to dry off within a hour or two.

Plastering over Artex is not as hard as it seems, but if you lack the confidence to complete the task, simply contact a professional for help.

Fuse box prices will vary and a periodic inspection should be carried out first. However, domestic fuse boxes cost an average of £460. A qualified electrician will advise if yours needs to be replaced and it's always a good idea to obtain a number of quotes before committing to this.

If your fuse box keeps tripping or blowing fuses, it may need replacing. Other signs that your fuse box is not working properly include humming, sparking and lack of power. Contact an electrician and ask for a safety report, this will diagnose the problem and lead to a quick fix.

1. How to build a shed base out of paving slabs
   • Mix sand and cement together to make mortar or use a pre-mixed one
   • Use a trowel to lay mortar for 1 slab at a time on the sub-base and lift a damp-sided slab onto the mortar, using a piece of timber and club hammer to tap the slab into position carefully. Continue to lay the first row of slabs
   • Make equally-sized spacers in all the joints in the slabs to ensure they’re the same size, checking it’s level as you go along
   • Next lay slabs along the two adjacent outer edges, filling in the central area row by row
   • Leave the mortar to set according to the instructions or for at least 48 hours before filling in the joints with mortar or paving grout
2. Building a shed base from concrete
   • Create a wooden frame around your shed base area (also called formwork) to stop the concrete from spreading
   • Mix pre-mixed concrete with water or use 1 part cement to 5 parts ballast
   • Wet the sub-base using a watering can with a rose on the end
   • Pour the concrete onto the framed base starting in one corner
   • Push the blade of a shovel up and down in the edges of the concrete to get rid of air bubbles
   • Use a rake to spread the concrete, leaving it around 18mm higher than the top of the frame. Work in sections of around 1-1.m²
   • Compact the concrete using a straight piece of timber that’s longer than the width of the base. Move the timber along the site, hitting it along at about half of its thickness at a time until the surface is evenly ridged
   • Remove excess concrete and level the surface by sliding the timber back and forwards from the edge that you started. Fill in any depressions and repeat until even
   • Run an edging trowel along the frame to round off exposed edges of the concrete and prevent chipping
   • Cover the concrete with a plastic sheet raised on wooden supports to allow slow drying. Weigh it down with bricks
   • Once the concrete is set, you can install your shed and remove the wooden frame with a crowbar

If you’ve made the decision to purchase an air conditioning system for your office, the next step is deciding whether to install the unit yourself or get in touch with a professional for help. To several business owners, this is a very simply decision to make, - a lot of money can be saved by making the task a DIY project. However, the installation of a heating and cooling system requires some specific skills and knowledge that, when not properly mastered, can lead to some installation faults which will ultimately make the system consume more energy than necessary while also affecting its durability. On the other hand, installation done by a well trained professional will not only save you a lot of money, but will also ensure you get to enjoy your system for a long period of time.

If you’re yet to be convinced about the importance of a professionally installed office air conditioning system, here are some point that just might make you have a rethink.

• Professionals are experienced and highly skilled. When it comes to the installation of heating and cooling systems in a work environment, there’s a need to call in a reliable professional. This is because AC system installation requires a well trained individual who know just how best to ensure your AC system works efficiently and for a long period of time.
• Most professionals are insured. When you call in an insured office air conditioning expert, you’ll have a peace of mind knowing you’re fully covered in case something goes wrong during the installation process.
• Professionals able to provide expert advice. Having a good experience in field and good knowledge of heating and cooling systems, professionals are able to provide helpful tips such as maintenance procedures so as to ensure you get to enjoy your investment for a prolonged period.

The most serious form of fungal decay is dry rot which occurs when the moisture levels of a timber is about 20 percent. It targets timber in buildings and feeds off the part of the wood which gives it its strength.it is able to produce moisture through the digestion of timber and as a result, does not require any source of moisture to spread. Once the dry rot is able to spread, it can severely impact and compromise the structural integrity of the house or building. If you think you may have dry rot on your building, the best solution would be to call on a professional to conduct a survey of your premises and have it treated as soon as possible if positive. If the dry rot is not identified and treated as soon as possible, you may have to remove and replace all the affected timber later on. In this post, we’re going to take you through the process of treating dry rot by yourself. Let’s take a look!

• The initial treatment stage of dry rot is to identify the moisture source and have it repaired. Once done, you’ll have to ascertain the full extent of the dry rot outbreak. To achieve this, simply open up the affected area by removing the plaster and render in all directions while also removing flooring and lifting floorboards. Once done, you should be in the best position to determine the full extent of the infected timbers.
• Proceed to cutback the timbers in-situ to a minimum of 500mm beyond the last signs of fungal growth or the strands of hyphae.
• Remove all fruiting bodies and detectible spores. Clean the wall areas to eradicate surface growth using a stiff brush if necessary.
• Replace the timber with pre-treated timber.
• Treat the new and old timber with a dual purpose dry rot treatment fluid and sterilise the masonry.