Find a Shop Fitter you can trust in Broadstone.

What Is The Difference Between A Conservatory And An Orangery?

If you’re looking to build an extension for your home, one of the first things that comes to mind is the type of structure that would best suit your property. When it comes to glass extensions there are two major varieties which includes the traditional conservatory and the orangery, but there are usually a lot of confusion over the differences of these two varieties. With the growth in popularity of glazed extensions, the differences between the two structures are becoming more and more thin. However, the main difference between a conservatory and an orangery is the number of glass incorporated. Conservatories are fully glazed structures featuring a low brick base wall, meanwhile orangeries are grand brick structures with with glazed roofs. But as a result of innovations of over the years in glazing, the difference has changed a bit.

Here are some of the major differences between a conservatory and an orangery.

✓ Orangeries are generally best suited to traditional-styled homes or with older property making use of matching stone or brick in construction. Meanwhile for a more recent or modern property, a conservatory will be the better option to add the flair to your property.

✓ Conservatories tend to be larger than orangeries, therefore if you want a smaller extension, an orangery would be your best bet.

✓ Orangeries are typically rectangular in shape and is traditionally a more regular building meanwhile a conservatory can be shaped to suit your needs. With an conservatory, you can get a T-shaped, L-shaped, curved, double ended and lean-to extensions to suit your preference.

✓ An orangery usually possess a flat roof at the edges with a glazed lantern section right at the centre. You can also find more luxurious orangeries having two or more lantern sections. However, when it comes to the roofing, conservatories generally have more options. Some are gabled or pitched, others are lean-to with a plethora of choice to finish off the roof.

Re-pressurising your boiler means that you allow more water to enter system via the filling loop. It can be easy to re-pressurise your boiler yourself. Always check your manual, but there are some simple steps you can take to restore pressure to your boiler:

• Switch off your boiler and let it cool completely

• Make sure both ends of your filling loop are attached

• Open both valves to allow cold water into the system – you’ll hear it start to move

• Look out for your pressure gauge to show 1.5 bar

• Close both valves

• Switch your boiler back on

• Undo both ends of your filling loop and remove it. Remember some water might come out, so be ready to catch some spillage!

One of one of the most unfortunate parts of a woodworm invasion is that the signs of the issue are just visible at the end of the woodworm's lifecycle. This is when the woodworm beetle breaks free from within the wood to proceed its breeding.

Sign 1: Departure Holes in Wood

The signs to watch out for are what we call exit holes. When determining if you have energetic woodworm in your residential or commercial property one extremely aesthetic sign is the holes produced by the woodworm as they leave the wood. The dimension of the holes varies relying on the types of woodworm but generally they are between 2mm and also 5mm. If the woodworm trouble is energetic the holes will have a 'clean' or 'fresh' appearance. They can often just be identified up close, unless there is a huge problem as well as many departure holes with each other. Take a look at our examples below of different kinds of exit holes:

Sign 2: Presence of Bore dust

Another sign that you have an online woodworm invasion in your property is the presence of frass being left by the beetle when it chews its means with the timber. Frass is a dirt developed by woodworm. The frass or woodworm dirt is light in colour and looks virtually like very fine wood shavings. This frass is essentially woodworm waste and also it can be this waste that can aid us identify what kind of woodworm beetle is present. As an example ... the frass created by the wood-boring weevil is 'sticky' to the touch as a result of there being moisture present. The pictures below offer an indicator of what to watch out for:.

Sign 3: Tunnels within the timber brought on by woodworm.

Although this is an apparent sign that you have a woodworm issue it is additionally one of the least noticeable. The tunnels are developed by the woodworm as it makes it method via the wood.

Sign 4: Harmed wood

Damage timber is a clear sign that woodworm are causing damage to your residential or commercial property. Damage can range from weakened floorboards through to crumbling skirting boards. It is very important not to puzzle woodworm damage with the damages triggered by completely dry rot or damp rot. If you are unclear which of these home care problems are creating the damage then it is essential to speak to a hardwood expert to evaluate the lumber to prevent unnecessary treatments that might not be appropriate.

Sign 5: Actual beetles

Dead woodworm beetles might be seen near lumbers that are contaminated. Similarly, throughout the beetle 'flight period' between May and October, you could see real-time beetles as they arise from the woods. Learn more concerning the woodworm lifecycle right here.

Building a conservatory can be a challenging task. But whether you plan to hire a professional to build your aluminium conservatory or are considering DIY, it’s good to start with a rough idea of how the process works.

It’s essential to begin with a strong conservatory base. The area needs to be measured out carefully and then dug out. You then need to level the earth and pour in concrete. Your damp proof course goes on top of this, preventing rising damp from entering your structure and creating the floor level.

Then, you need to build your conservatory walls. Start by building your dwarf wall, positioning the external sills on top. Next, fix in the frames and hang your doors. Sit your roof ridge on top of the frames, and add the roof rafters.

Finally, you need to fit the glazing sheets and guttering. Once this is all done, your new aluminium conservatory is ready to go!

Do you have existing floorboards and wish to fit new solid wood floor over it? If you’re planning to go for a DIY effort, there are a number of things you should put into consideration before you even get started. Firstly, you should have it in mind that existing softwood floorboards are usually not flat, implying that the surface of the existing might not be ideal to serve as the foundation on which to put your new solid wood flooring. Secondly, if you’re going to lay the new solid floor on the existing floorboards, it would be wise to select wood that is a minimum of 18mm thick to make your new solid wood flooring a lot more stable.

If you discover that your old floor is not too even, there are two option you can consider to protect your investment. You can lay the new floor at a 90 degree angle over the existing one. In other words, you should lay the new floor lengthways if the old one is laid widthways. Using this technique alongside a method of fitting referred to as secret nailing will go a long way to make sure your installation efforts is a successful one.

The second option you can put into consideration when laying solid wood flooring over old ones is to lay chipboard or plywood over the existing floor prior to the installation of the new floor. Here, there will be an increase in the cost of your installation, however it will be more reliable and durable as it assists in ensuring the stability of your new flooring. Some benefits that comes with this option includes the freedom to lay the new solid wood flooring in any direction you want as well as the freedom to use any fitting method you deem fit. Click here to learn more about wood flooring.

How you install commercial rubber roofing is similar to fitting it on a residential property, except that the area that’s covered is likely to be bigger. With commercial properties, you should always leave any maintenance and repair works to the professionals – whether you own or lease the property, you could invalidate any insurance if you try to install rubber roofing yourself. We’ll outline the steps roofers will take when installing rubber roofing on a commercial property.

Firstly, the installers will remove any existing coverings and clean and dry the surface thoroughly. This is vital in ensuring that the rubber will stick. They will then unwrap the EDPM rubber membrane and leave it to rest until it’s fully expanded. On a warm day this may take around half an hour.

Next, the roofers will work with half a sheet of rubber at a time and adhere it to the roof surface. They may use a water-based adhesive which they will spread onto the roof in sections, then roll the membrane onto the surface before moving onto the next section. If they’re using a bonded adhesive, they will apply it to both the roof and the rubber and leave it to dry until it’s tacky before extending the membrane.

Once the EDPM rubber is rolled out, the installers will brush the surface with a large broom to get rid of bubbles and provide a stronger bond. Then they will work of the edges, applying adhesive to roof and walls edges, sealing corners and creating watertight seals. They’ll also tidy up any excess membrane and seal all the trims.

As long as it’s installed correctly, your commercial rubber roofing should last you decades without any repairs needed. It’s always best to inspect your roof regularly to spot any damage before it becomes a bigger problem.

How Much Are Roof Tiles?

The way your roof looks speak volumes about your home or property. When you have an attractive roof installed, you give a huge impression of how beautiful the interior of your house is.

Roof tiles are the prefect roofing material if you wish to have your house looking elegant and decent. However, what turns off most homeowners about roof tiles is the belief that the prices are not budget friendly. This is absolutely false and in this article, we’re going to give you a rough estimate of the cost of roof tiles.

The price of roof tiles includes the cost of removing and getting rid of the old roofing materials, the cost of purchasing new roof tiles in the market as well as the cost of installing them on your house. There are a plethora of factors that affects the cost of roof tiles. These factors include the height and size of the roof, the roof’s design, the roof’s pitch, incidental costs of labour, the company hired as well as your location. What’s more? A roof with a complicated design such as hips and valleys will also generally cost more than simpler ones. Also, if you happen to reside in a place like London with higher cost of living and greater demand, the cost is also likely to be higher than other regions. As a result, providing an accurate cost of roof tiles is simply not possible.

Generally, the cost of having an entire roof retiled will cost within the range of £10,000 to about £20,000. For a more accurate estimate, you’ll have to identify reputable roofing professionals within your local area and find the roof tile prices that perfectly suits your budget.

Having a security gate installed on your property brings about a lot of benefits. However, to ensure these benefits are maximized, it’s important to make sure the gates are properly installed. The installation can be made a DIY task or professionally installed. If you wish to install your security gates by yourself, then you’ve come to the right place! In this post, we’re going to take you through the processes involved in the installation of a security gate. Let’s take a look!

1. Go through the instructions carefully to get the best out of your installation and also a good understanding.
2. Dig holes for the posts. Don’t make holes round to make sure the posts do not turn or twist.
3. Get rid of any obstructions like uneven ground, rocks or any other obstacles that may impact the free opening of the gate.
4. Re-confirm the distance between the two poles to make sure that the gate can hang perfectly between them.
5. Get an adjustable hinge. Adjustable hinge will allow for extra customization while also enabling improved correction of errors.
6. Make sure that the measurement taken leaves sufficient space for vehicles such as emergency vehicles and package delivery trucks when opened.
7. If you have a fence that’ll be connected to the gate, you should install the gate at the back of the fencing pillars. If you later decide to automate the security gate, this will prove to be a smart move as it enables a free and unhindered function.
8. Make sure you go through the local laws before installation.