Find a Shop Fitter you can trust in Llanarth.

The bath waste is primarily responsible for the safe drainage of the bath once the plug is removed. Generally, it’s connected to the overflow which enables excess water to go away if the plug is in and the bath is overfilled. There are times whereby the bath waste can corrode and start to leak, so when this happens its important to replace the components so as to make sure that there’s no excessive water damage as well as other complications. This is a task any DIYer, regardless of the experience level can achieve, however if you lack the confidence to pull this off, then we’d recommend you get in touch with a professional who can guarantee the best results for help. In this guide, we aim to take you through the bath waste fitting process to ensure you do it the right way. Let’s take a look!

• Remove the old bath waste. Do this by unscrewing the screw probably located at the centre of the waste cover. Then pull the outer cover away from the bath. Locate a larger washer underneath and lift it out, the clean the hole of any old sealant to make a smooth entry for the new waste.
• Disconnect the connector and pipe. Locate the plastic pipe that runs from the bottom of the bath to the overflow rose high up at the bath’s end. You’ll observe a connector at each end of the pipe, remove the pipe from the connectors and unscrew both connectors.
• Connect new fittings to new pipe. Take the new plastic waste and connect it to one end of the new plastic pipe and repeat the same process at the other end with the plastic overflow.
• Connect to the bath. Push or screw the waste up into the hole underneath the bath and connect into the trap pipe underneath. Push the new overflow into the bath’s back and on the front then screw I the rose or the cover of the new overflow.

Lean-to conservatories happens to be some of the most versatile and underestimated conservatory styles you’ll find in the market today and little wonder they’re so popular in the UK. Lean to conservatories, also referred to garden sun room, have been an integral part of the English garden for almost a century. Some of the common features of this extension is being spacious, having large expanses of glazing as well as a special low pitched roof. In other words, lean-to conservatories are able to offer extra space while maximizing natural light and can also be easily installed into awkward spaces.

If you’re also thinking about getting a lean to conservatory, then you’d probably want know the numerous benefits that comes with it. In this post, we’re going to consider some of the reasons why installing a lean to conservatory is a smart decision.

1. It’s easily adaptable to most property styles. Possessing simple lines as well as slim slightlines a lean to conservatory can fit several styles of both traditional and modern homes. In fact, the low pitched roof makes the entire structure a lot easier to fit in rather awkward spaces, making them the ideal choice if you’re have limited outside space.
2. It’s very cost effective. This conservatory style happens to be one of the most affordable and cost effective type of conservatory you’ll find around. Due to their simple design as well as structure, both the cost of installation and maintenance can be minimized, saving you some cool bucks.
3. It offers more usable space. Lean to conservatory’s large design and smart design makes it suitable to add an additional usable space to your home or property.

Gravel driveways are very popular in the UK for a reason. Not only do they provide a more natural look than other driveway surfacing options and happens to be quite affordable, but they’re also very easy to install and maintain. And more importantly, they have a great range of colour scheme to match and compliment your brickwork and plants to make for an alluring outdoor living space.

Are you also planning to install a gravel driveway? You’ve come to the right place! If you’re a competent DIYer with confidence, then this should be as easy as they come. If otherwise, then it’s advisable to hire a reliable professional who can guarantee the best results for help. In this guide, we’ll shed more light on the gravel driveway installation process. Let’s get started!

✓ Prepare the floor. To get a level and flat floor, you’ll have to clear the area of all weeds, paving slabs, block paving etc. Get a good foundation material to apply to the surface if you have an uneven surface or if you have potholes to fill.

✓ Stop the weeds. You’ll have to apply an anti-weed membrane so you won’t have stubborn weeds growing through your finished driveway.

✓ Spread the gravel. In the process of purchasing your gravel, ensure to select handy bags, bulk bags if tipped loose. If you go for the bags there may be a need of wheelbarrow to help move the gravel around, however with a tipped loose you can have the gravel chippings tipped directly on to the driveway.

✓ Make use of the hose. It’s possible that when your gravel arrives, it’ll be be dusty. Make use of an hose to run over the driveway to bring out the true colours of your driveway.

How To Take Tiles Off A Wall

The bonding agent or adhesive usually incorporated to hold a tile against the wall are always very strong or else you’ll find your tiles peeling off. As a result, to have them removed is not the easiest of tasks and bashing them with a hammer, will only have them broken leaving you with the task of having to scrape off the pieces. A better and much easier approach to removing tiles from a wall will be to pry them off one after the other. So how do you go about this? Let’s have a look!

lSafety First, Then Remove The First Tile

• Wear a protective eye goggle and gloves.

• Break up the grout around a tile located atthe wall’s centre using a putty knife and hammer.

• Place the putty knife under the the tile and gently it with the hammer.

lRemove The Remaining Tiles

• By tapping and prying using the tools - hammer and putty knife, wipe off all the tiles in the vertical row.

• Once done, continue to detaching the tiles in the adjacent rows until you’re able to open a wallboard section that’s around 12 inches wide and does not obstruct a stud.

• Use a keyhole blade to poke it through the wallboard.

• With the help of a reciprocating saw, cut out the wallboard’s section.

lCut The Fasteners

• Using a metal-cutting blade, cut te wallboard-holding fasteners. Make sure the fasteners holding the wallboard to the top and bottom plates of the wall are both detached.

lRemove All Wallboard Sections

• Using a similar approach, gently remove the other sections of the wallboard.

• Once completed, you can easily sweep the tiles’ broken pieces.

• Finally, vaccum the grout dust to ensure the work is neatly done.

If you lack a proper training or experience, taking off your tiles from a wall is best left to a skilled professional for the best results and to prevent potential damages which can lead to additional costs.

An electric range cooker should always be installed by a registered electrician. They will be aware of wiring regulations, what sockets are needed and make sure that your cooker is installed safely and correctly. make sure you book one before your new cooker id delivered!

Can You Lay Block Paving On Top Of Concrete?

The replacement or improvement of your driveway is unarguably one of the most expensive projects you can undertake in the exterior of your home. When done by a true professional the results can be impressive and visually appealing, however you’d have to pay huge bucks to have this done. This is exactly the situation with block paving as it is not only time consuming, but also a lot more expensive when compared to other types of driveway.

A large chuck of this cost is associated with the removal of the existing driveway. So assuming your old driveway is concrete, can you simply pave over the existing concrete? If yes, will it save you money? The simple and short answer is yes. It’s in fact advisable to pave over concrete as this will not only add around 20% to your home’s value, but also make it look a lot more attractive and pleasing to the eye.

However, there are some problems associated with block paving over concrete. It may be better to remove the concrete in situations whereby the base is substandard. For instance, if the ground underneath the concrete is failing, there’ll most definitely be problems.

Also, there’ll be some issues with settling (not even the cracks). If your concrete is dropping little amounts every year, these can affect the blocks and ultimately lead to dropping of some sections of the block paving in such a way that they’ll no longer be on the same level as the other blocks. Giving a rise to the possibility of drainage issues, tripping hazard and lots more.

Other issues that may crop up can be triggered as a result of using the wrong size block height as well as totally ignoring or overlooking the undulations of the concrete.

What Is Central Air Conditioning System?

Central air conditioning system is a system which operates by cooling air at a central place and distributes the cooled air to and from rooms with the help of one or more fans and ductwork. What makes the whole idea of air conditioning feasible is the operations of the air conditioner compressor. When it cooling gas is compressed, it allows it to absorb heat from the house and blows it outside into the outside air and that’s exactly how the cool air is being generated.

Central air conditioning are of two main types which includes a split system as well as a packaged unit.

Generally, in the split system AC unit, both the condenser and compressor are included in the outdoor metal cabinet, whereas the indoor cabinet includes the evaporator. Typically, in several split system air conditioning units, the indoor cabinet will also include an air handler or a furnace. What’s more? The evaporator coil of the AC unit is fitted in the cabinet or the furnace or heat pump’s primary supply duct. This type of central air condition is usually the most economical AC unit to fit if you already have a furnace in your home.

However, in a packaged central air conditioning system, the components including condenser, compressor and evaporator are all included in one cabinet. Supply of air as well as the return ducts are connected through the home’s exterior wall or roof to the package central air conditioning system - mostly placed outdoors. This type of central air conditioners also features electric heating oil or a natural gas furnace. With this perfect blend of central heater with air conditioner, there’s simply no need to a separate furnace indoors.

It is constantly important to consider your skill degree as well as your physical capacity when picking to tackle a Do It Yourself task. Generally, sun tunnel setup is not made to be tried by anybody without experience and training for the following reasons:

• You will likely need professional devices which may include scaffolding.
• It is really unsafe to deal with a roofing as a result of the danger of falling.
• Your sun tunnel have to be appropriately secured to avoid leaks as well as drafts coming through your roofing.
• This installment is not a straightforward, easy job. It involves eliminating roofing ceramic tiles, attaching a panel, thoroughly installing the passage and also even more.