Find a Shop Fitter you can trust in Hove.

• The glass has smashed from an impact such as a stone hitting it from a lawnmower
• You have been broken into and suspects used the window to gain entry
• The glass has blown (lost its airtightness) from constant water build-up around the seals, which is common in bathrooms
• Extreme weather or pressure changes have caused a crack

1. Including the beading (the plastic and rubber seals around the windows that can be removed), measure the width of the window frame.
2. Do the same for the height of the window, making sure you include the beading.
3. Then, take 10mm off each measurement, and you have the approximate size of your glass.

Slab paving is a great material to use to create a sturdy shed base.

Start by measuring out the area where your shed is going to be. This needs to be the size of your shed, plus about 10-20cm extra each way. Mark it out with string and pegs, make sure it’s square, and dig it down to about 6cm deep.

Then create a sand and cement mixture and put a layer down, followed by your paving slabs. Make sure you start in one corner and use a rubber mallet and spirit level to make sure they’re as level as possible. Leave this to set and you’re ready to use your shed base.

The holy grail of home extensions is basically the need for additional space for living as well as leisure. However, before commencing your home extension project, you’d probably want to know just how big your new building can be. In this article, you’ll find the answer to this question which is also frequently asked by many other home or property owners in the UK.

Besides your budget, there are two other major influencing factors that can determine just how much extra room that can be added. These factors include whether you wish to carry out the extension project under Permitted Development rights which is usually for a smaller project or you’d prefer to opt for a larger project which is covered by Planning Permission.

Apart from the limitations in the size of an extension under Permitted Development, the extensions are also a lot more affordable and consumes less time when compared to the extensions under planning permission. So what exactly is the size limit for an extension under Permitted Development and the ones under Planning Permission?

For a single storey extension, the maximum size that can be constructed without having to submit an application for Planning Permission includes:

• An extension should have a maximum length of 6m, if you reside in a terraced home or a semi-detached property.

• Extensions for detached properties can have a maximum length of 8m.

• The extension built must not go beyond half your garden’s area.

• The extension should have a maximum height of 4 metres, but in the event whereby the extension is situated within 2 metres of the boundary of your property, it should not exceed a height of 3 metres.

• The extension should not be higher than the highest part of the existing house’s roof.

Driveways usually sink because they haven’t been laid properly. They may not have been dug deep enough, or the installer might not have used the right materials. This will need to be corrected at the earliest opportunity, although in extreme cases, the driveway may need to be completly be relaid.

To ensure that your boiler is safe and operating efficiently, it’s essential to have it serviced on a regular basis.

Generally, a boiler service will deliver a wide array of benefits which includes the opportunity to identify safety issues like a possible leak of carbon monoxide, efficient use of energy and reduction in energy bills, prevention of breakdowns, a valid warranty when the boiler is serviced regularly by a qualified engineer as well as an extended lifespan. So what exactly does a boiler service cover? This guide will give you a good insight as to what happens during that service.

Before we get started, it’s very important to note that the work done is always as good as the engineer you employ. Therefore, it’s advisable to make sure your preferred engineer is qualified before proceeding with the service. Below are some of the basic practices the engineer may perform during their visit.

• Thorough Inspection

During the visit, the engineer will carry out a detailed examination of your boiler to ensure it still meets the current standards while also making sure that there are no leaks or corrosion. What’s more? They’ll also examine the boiler’s flame for any faults.

• Boiler Casing Removal

The boiler casing will be detached to check all components and ensure they’re free from all forms of dirt and see to it that they’re all working just as they should. This will include examination of the heat exchanger, main injector, burner and spark probe.

• Flue Examination

The engineer will inspect the flue terminals to make sure there are no form of obstructions and it’s also safely installed.

• Gas Pressure Examination

This is done to make sure the heating system is operating at the right pressure.

If you’re considering installing ground source heat pump, it’s likely you’re also wondering just how deep it’ll go into the ground to be efficient. Well, the initial step to take while determining the ground source heat pump’s design is to research the different options available to reduce the space heating as well as hot water demand. To achieve this, there must be an accurate measurement of energy efficiency which is usually done by getting an Energy Performance Certificate ( EPC) . This is helpful as such that it helps to identify the most suitable or the right size of heat pumps which will help reduce the consumption of energy, heat loss as well as hot water needs of the house.

Generally, ground source heat pumps are usually more compatible with new builds against retrofits. What’s more? The heat pump has two different types of loop systems :

✓ The open loop system and;

✓ The closed loop system.

The open loop system absorbs water from the ground and transfers this ground water via a heat pump to where it carries out the extraction of heat. Meanwhile the closed loop system extracts heat from the ground and incorporates a continuous loop of piping that’s linked to the indoor heat pump. There are a few types of closed loop system, these includes:

✓ The Horizontal Ground Source Heat Pump. This is installed in horizontal trenches of about 1 to 2 metres deep. This is more common in areas where land is readily available.

✓ The Vertical Ground Source Heat Pump. These boreholes are a more costly option but it’s also the best option when land is not readily available for horizontal installation. The insulation hole is dug at a minimum of 6 metres into the ground, while the entire piping will be at a depth of about 50 to 150 metres based on your home’s heat requirements as well as the ground’s composition.

It can be rather hard to identify whether woodworm are energetic or whether the damages and also holes are historical, particularly if you buy a product of antique furniture with indicators of woodworm, or if you move right into a new location as well as find some indicators of woodworm. Apart from searching for as well as determining live or dead bugs the major methods of informing if woodworm are energetic are:

• Fresh cleaning or frassing under or beside the holes
• You can see light coloured timber in the holes, which have sharp edges
• Edges of wooden light beams as well as joists are breaking away to reveal fresh, light timber beneath

The hardest part of the procedure is to appropriately diagnose if activity is present or historic so to start with there are some simple indications:

• Brand-new exit openings in timbers, the shapes and size will certainly additionally identify the type of timber uninteresting beetle. The most typical, which is usually refered to as 'woodworm', is the usual furniture beetle (Anobium punctatum) as well as this leaves a rounded hole 1-2mm in size. It does depend on the type of timber however a brand-new opening is often 'intense' with a typical new wood colour where as an older opening might become dark as well as much less smooth.
• Dirt, noticeable bore dirt called 'Frass' listed below the holes is usually the simplest sign of activity as aged dirt will blow away over time. Again the shape of the dirt can additionally aid identify the kind of beetle, Deathe watch beetle dirt has little 'bun' designed pellets noticeable to the naked eye.
• Actual Beetles, on occasion you will certainly locate dead beeltes specifically on window sills as many emerge from springtime to the end of summer though its the Larva that cause one of the most harm with some kinds living and feeding for several years within the wood.
• Crumbling hardwoods, this will certainly most commonly take place on floorboards as they have a tendency to be thinner than roof lumbers or joists and also will escape to the touch.

These are the most convenient signs of activity though there are expert examinations that can be finished most are not cost effective, the dampness material of the lumbers can additionally be an indicator as to whether infestation might take place as fairly completely dry timber will certainly not be susceptible (this would need a deep probe examination).