Find a Shop Fitter you can trust in Peacehaven.

More than being just a pesky nuisance, fleas are actually a risk to the health and overall wellbeing of your pets. As a result, when discovered in your personal space, there’s a need to do all in your capacity to ensure they’re totally eradicated. If you wish to learn an effective way to get rid of fleas, then you must go beyond simply learning a few tips on bathing your dog. This isn’t battle that can be won at once, it’ll take days or even weeks due to the life cycle, habits as well as abilities of the fleas. To get started, here’s what you need to know about getting rid of fleas in the house.

To get optimum results from a deep clean, there’s the need to take out  and wash all bedding including pet bedding. Also, take the pets out of the house and move the furnitures in order to fully expose all the hidden areas in the house. Once done, the next step would be to vacuum the space thoroughly ( using the beater bar style as recommended by the experts) and dispose off the vacuum bag or wash the waste container after vacuuming. Vacuuming does not only make the area clean and clear out the flea dirt, but the suction also forces larvae to come out of their insecticide-resistant cocoons quickly which goes a long way to simplify your work when you introduce the treatment.

The vacuum deep clean task should be repeated every other 10 days for about a month based on the severity of the flea infestation as well as the frequency at which you spot the fleas when cleaning. What’s more? The pet bedding should also be washed every week for about a month to prevent the re-infestation of the pesky bugs. It’s however important to note that if the problem is a serious one or you house infested is a heavily carpeted one, steam cleaning may be necessary once you’re done with the vacuuming.

Due to its numerous advantages, bathroom floor tiles are a popular choice for homeowners across the country. Not only are they durable and good looking, but they’re also resistant to both moisture and stains. Hence, they’re very easy to maintain and with skill, confidence and patience, can also be relatively easy to install especially when compared to wall tiles which is a vertical surface.

Fitting bathroom floor tiles requires a lot of planning as it can be easy to make costly errors here and there. Generally, this task shouldn’t pose any serious difficulty for a confident and patient DIYer. However, if you lack these attributes, then it’s advisable to call in a professional who can guarantee the best results for help. In this article, we’ll take you through the bathroom floor tiles installation process. Let’s get started!

• Make Sure You Have A Levelled Subfloor

✓ Your subfloor’s stability is crucial for the success of your tile laying.

✓ Once done, then you can start planning how to level the floor.

✓ Identify the highest point of your floor and place a really long level to determine the dip and hump spots.

✓ Fill in the identified low spots with mortar.

• Cut The Tiles

✓ Using a wet saw with a diamond blade and pump, cut through the tiles to get the appropriate shape.

• Choose The Appropriate Adhesive

✓ To best adhesive is probably the one written on the label and suggested by the manufacturer.

✓ If uncertain, you can make use of a modified mortar

• Prepare The Area

✓ Using the prepared mixture of your mortar, prime the surface by spreading it on the floor with the trowel’s flat side.

✓ Once done, you can add more mortar with the ridges of the trowel.

• Space The Tiles

✓ Tile spacement depends largely on the surrounding walls. Straight walls equal straight tiles, if not your judge would be required to ensure a great outcome.

✓ If the wall is straight, make a space of about an eighth of an inch. The bigger spacing, the higher the possibility for the grout to become visibly discoloured.

• Use The Right Grout

✓ With sanded and unsanded grouts having a variety of colours, choosing the ideal grout can a tricky affair.

✓ The size of the spaces play a huge role in determining the best choice.

✓ Use a sanded grout if the spacing is an eighth of an inch or more. However if less, make use of the unsanded grout.

It’s up to you what size gravel you use for your driveway, but there are some guidelines that are worth following. If you go too small, your gravel will get displaced easily. But, if you go too big, you driveway might be quite tricky to walk on. Generally, it’s a good idea to go for a gravel size somewhere between 10-20mm.

How To Tile A Wall

If you’re not an expert floor installer who would take wall tile installation as merely being a vertical floor, you are advised to be very cautious when tackling the project. The installation of wall tiles follow some set of rules which you’d better not break if you really wish to protect your investment. And worst of all, a wall tile done wrong is a lifetime penalty of having to look at it. So how can you get it right? Well, probably by reaching out to a wall tile installation professional for a good quality solution that’ll save you time, money and effort. However, we’ve put together this guide to help give you an insight of how it works and also to help you avoid some unnecessary expenses. Let’s have a look!

lHang a batten board

• Start your rows of tiles or bottom-most course with a batten board which works to prevent spillage of tiles.

• Position the batten board at 3/4 of the tiles’ height. Ensure not to start at the floor.

lForm A Pyramid Shape With The Tiles

• If you’ve reached the bottom row of tile, then arrange the tile in a pyramid shape. To achieve this, you’d have to install the tiles one through four as instructed. Each following row will be draped over the pyramid.

lExamine The Floor For Level & Walls For Plumb

• If your floor level or plumb is off by a maximum of a half-inch over the course of 8 feet, add extra baseboards and trim to cover up the problem.

lThe Least Size Of Tiles To Be Used Is Half-Wide

• Ensure that no “silvers (tiles that are lower than half the width of the tile in question) are incorporated in the project.

Can You Tile Over Floor Tiles?

Are you about to tackle a refurbishment or renovation project? If yes, then you might be worried about the removal of your old tiles before installing the new ones. Being fully aware that this process can be time and money consuming, it can only make sense to consider whether you can tile on existing tiles. The answer is yes, however, there are a few details you must take into account when embarking on this cost-effective journey. Here’s our advice:

lSelect The New Tiles

• Take into consideration the surface behind the tiles and the weight it’ll be able to withstand.

• For plasterboard, the surface can withstand about 30kg to 32kg per m2 (28.5kg of tile/square metre and 2.5kg to 3.5kg of adhesive and grout).

• For skimmed plasterboard, the surface can hold about 18kg to 20kg per m2 ( 16kg of tile/square metre and 2.5kg to 4kg of adhesive and grout )

• Consider the existing tiles, if heavy enough, then your choice for the new tiles should very light.

lPrepare Old Tiles

• Confirm that the old tiles are well glued to the substrate.

• Check that the tiles are level. If not, use a grinder to flatten out any humps.

• Remove the sealer for the old tiles, if any.

• Clear out all dust and dirt.

lLay New Tiles

• Spread a layer of flexible adhesive.

• Lay the new tiles

lFinish The Project

• Fill the joints with an appropriate tile grout.

• Seal the edges with a sealant.

It’s as simple as that! However, it must be said that if you’re lacking the appropriate training or experience to pull this off, then you probably would not want the first trial on your prized asset. For a top quality job and to avoid unnecessary costs, you can reach out to a tiling professional for help.

The level of damage caused depends on the varieties, the size of the problem, and what has been ravaged. Not all woodworm is harmful. Nonetheless, if left unattended in time, woodworm can seriously weaken hardwood, triggering severe damages within its framework.

Now, weakened structural elements can give way resulting in a huge repair service cost or at worse; severe injury. It is therefore that a woodworm problem is a significant issue if found in:

• Lumber joists
• Load-bearing timber
• Roofing
• Rafters
• Structural timber

As mentioned, there are numerous consider figuring out the influence and level of an invasion and this requires to be verified by a specialist before any kind of action is taken.

Unlike the photovoltaic (PV) power which works to turn a part of the electromagnetic radiation of the sun directly to electrons and electricity, a solar thermal can simply be referred to as the absorption of the sun’s heat for human use. As a result, the solar thermal has a wider range of uses than the PV does in several ways. This is due to the fact that the sun’s heat can be absorbed and transported via a medium and the stored energy incorporated for several great purposes such as to heat water, to heat and cool a home or living space, to prepare a meal as well as to generate electricity. All these functions are useful for both residential and commercial spaces.

There are generally three different ranges of solar thermal energy that are being used which includes the low temperature ( for heating, cooling as well as ventilation), the mid temperature ( used for preparing meals, heating hot water and the likes) as well as the high temperature ( used for generating electricity). To focus more on generating electricity, there are a wide array of ways through which the sun’s heat can be directed at creating electricity via a heat exchanger which operates to super heat water or inert gas to power an electricity- generating plant or to produce electricity via a Stirling engine.

In order to increase their output or make them more efficient, evacuated glass tubes are used to encircle the tubes which in turn helps them to collect more heat energy while also protecting them from re-radiating the heat energy absorbed. The trough are normal positioned north to south as well as to keep tabs on the travels of the sun throughout the day.

When enjoying your home to the fullest gets hindered by your staircase, getting a stairlift is definitely a great option to put into consideration. If you’re wondering exactly how stairlifts work, then you’ve come to the right place! In this post, we aim to give you a detailed information of stairlifts’ operating process. Let’s take a look!

First and foremost, it’s important to state that all stair lifts possess three main components which includes the rail, the seat as well as the drive system ( also referred to as the carriage which powers the chairlift ). Using a stairlift is pretty easy, all you need to do is sit on the seat, fasten the seatbelt and push the rocker switch located on the seat’s armrest. Once done, this will make the stairlift move smoothly up the rail.

Generally, stair lifts possess a soft start or stop to make sure the chairlift glides gently from the beginning to the end of the staircase. If you want to stop the stair lift, all you have to do is to let go of the rocker switch and the unit will automatically stop moving. After the stair lift has gotten to the end of the staircase, simply pull up a level present on the seat’s side. This will make the stairlift’s seat smoothly swivel 90 degrees and locks itself in place to make for an easy exit. What’s more? Most stairlift’s seat, arms and footrest can be folded when not in use to make sure there’s enough free space along the stairs.