Find a Shop Fitter you can trust in Cirencester.

Depending on the size and location of the blockage, a blocked drain may be fixed by simply removing the build-up. This can be done either by using drain cleaner or physically removing the blockage. If the blockage is very serious or located within the pipes themselves, you will need to contact a plumber.

If your boiler is leaking, there are some checks that you can do yourself. However, you should never attempt to repair your boiler yourself – only a Gas Safe-registered engineer should conduct repairs.

There are 3 main reasons why your boiler might be leaking: there’s a pressure valve fault, a temperature valve leak or corrosion in the system. An engineer will be able to spot the problem quickly, but in the meantime there are a few things you can do:

Check the pipe fittings

If your boiler is leaking water around the pipe fittings, it could be an installation fault and you should get in touch with the engineer that fitted it. You can check the pipe fittings by drying the area then waiting to see if the water appears again. If it does, you may be able to do a ¼ turn of the pipe to stop it. However, you should still call the engineer that installed it to ask them to check the PTFE tape on the inside.

Inspect the seals

Over time, the rubber seals on a boiler can start to perish, so if you have an old boiler this could be the source of your leak. If you have a new boiler, it could be caused by your boiler running over pressure.

Heat exchanger corrosion

Unfortunately, if a boiler engineer discovers that the boiler is leaking water from the heat exchanger, this is the end of the road for your system. The heat exchanger is the most expensive part of your boiler, so it makes more financial sense to replace your boiler with a newer, more efficient model rather than try to replace it.

This is a question that’s very common amongst individuals looking for the best way to get rid of glass and reasonably so. Glass is a very dangerous and hazardous item which requires sensible precautionary measures to your waste disposal activities. If you are looking to dispose a whole glass, you should first consider giving it away to a friend or family who might be able to put it to good use. However if you are still concerned whether you can put glass in a skip, the answer is yes. And in fact, it’s probably the best glass disposal option that’s currently available, as it goes a long way to ensure user’s safety in the broken glassware pieces handling process.

Upon successful completion of your building’s construction or renovation, there’s a high chance a lot of broken glasses would be scattered everywhere and in need of immediate disposal efforts. The longer you ignore the glasses lying around, the higher the possibility of the glasses harming you or the construction workers. As a result, it is vital to make sure that the construction or project site is clean and free of any glass-posed hazards. Hiring a skip is your best bet to get rid of these harmful and unwanted wastes from your environment.

Wheelies are often considered to remove glasses especially from construction sites. However, due to the bulkiness and sharpness of glasses, it is crucial to incorporate heavy disposal equipment that are good enough to cut through the rubbish on the site. In addition, it’s not advisable to dump your broken glass in recycling bins, as it poses great threat to the waste disposal team collecting the recyclables. If you’d ever need to put your glass in a skip, ensure to insert them in boxes or wrap them up with paper before removal to enhance user’s protection. Click here to learn more about skips.

In most areas, you will not need planning permission. However, if the property is listed or in a conservation area, you will need listed building consent or planning permission to paint the exterior. A surveyor or architect's advice will be invaluable as they can help with this process.

The quick and simple answer to this question is yes, stairlifts can be fitted to almost any staircases, however there are some instances where this won’t be very easy. There are a number of factors that determines whether a stairlift will perfectly fit your home. In this post, we aim to provide you with a good insight on these factors. Let’s take a look!

• The staircase width. The primary factor that really determines whether or not you can have a stairlift fitted is the width of your staircase. In the event whereby your staircase happens to be too narrow, this can lead to safety issues - users can hit their knee s on the rail or wall or the stairlift could also become a potential trip hazard. Generally, the minimum width a staircase can be to allow for a stairlift to be fitted is about 29 and 32 inches.
• The staircase height. Before going for a stairlift, the height of your staircase also needs to be put into consideration. This is prevent any potential head knocks when the stairlift is in operation. Normally, this shouldn’t be an issue for people considering a stairlift for their home, but the vertical space is one that must be considered if you’re planning to get a perch stairlift. This is due to the fact that when the user stands up, more vertical space will be taken compared to when he’s seated.
• The curved stair case. The challenge here is the fact with a curved staircase, the fittings and fixtures of your new stairlift must be tailored to the area in which it’ll operate.

Do you have existing floorboards and wish to fit new solid wood floor over it? If you’re planning to go for a DIY effort, there are a number of things you should put into consideration before you even get started. Firstly, you should have it in mind that existing softwood floorboards are usually not flat, implying that the surface of the existing might not be ideal to serve as the foundation on which to put your new solid wood flooring. Secondly, if you’re going to lay the new solid floor on the existing floorboards, it would be wise to select wood that is a minimum of 18mm thick to make your new solid wood flooring a lot more stable.

If you discover that your old floor is not too even, there are two option you can consider to protect your investment. You can lay the new floor at a 90 degree angle over the existing one. In other words, you should lay the new floor lengthways if the old one is laid widthways. Using this technique alongside a method of fitting referred to as secret nailing will go a long way to make sure your installation efforts is a successful one.

The second option you can put into consideration when laying solid wood flooring over old ones is to lay chipboard or plywood over the existing floor prior to the installation of the new floor. Here, there will be an increase in the cost of your installation, however it will be more reliable and durable as it assists in ensuring the stability of your new flooring. Some benefits that comes with this option includes the freedom to lay the new solid wood flooring in any direction you want as well as the freedom to use any fitting method you deem fit. Click here to learn more about wood flooring.

How To Hire A Handyman

With so many individuals having not-so-good experiences with handymen, hiring one can be a very difficult task. If you’re also looking for the best way to hire a handyman, then you’d have probably heard some stories of them not showing up, not returning calls or delivering an awful service after promising heaven and earth.

However, the reality is there are also a number of people who have enjoyed the several handy skills these “small job guys have got. Some who actually return calls, show up and also come true of their promises. So how do you become one of those people that’ll have a great story to tell about these handymen? Well, in this article, you’d probably learn a thing or two on the best approach to hiring a handyman that’ll not only provide you with a high quality service, but also display an all-round professionalism and excellent customer service.

• Be Organized. Make a list of all repair and maintenance services required and establish a budget for them. You can use free online pricing tools like Home Advisor’s True Cost Guide to learn more about repair costs.

• Prioritize Your Tasks. Your repair list should be made in order of priority.

• Compare Your Prices. Ensure that your handyman is familiar with the repairs and compare the prices. The handyman’s price quotes can be a little bit higher, but more attention should be placed on obviously inconsistent pricing.

• Search For References. It’s important to request references of previous work. If the handyman has low quality work samples or negative references, then you might want to steer clear and find another handyman.

• Discuss Payment. If you have multiple projects to be done, it’s advisable to structure your payments around task completions. Do not even consider hiring a handyman who requests a full upfront payment.

The flight of steps in your multi-storey household doesn’t have to be purely efficient. With just a little thought given to banister design, the boring flight of stairs can turn into something you would like to show to people and be proud of. Replacement of your banister can even enhance the worth of your property, giving the entry an outstanding presence. But how much will new banisters and spindles cost you?

If you are considering starting with this project, having a help from a professional is always advised.

New banister cost

Banisters are also known as handrails. They are reinforced by balustrades or spindles – a row of pillars that improve the security of the stairway and donate in the direction of the overall look and feel. Banisters and spindles may appear dull due to use over time. A fresh coat of polish might help your staircase get a new facelift.

The cost of new banisters and spindles will fluctuate solely reliant on the material. The price for a new banister starts around £40 for softwood and can reach £120 for a metal one.

Spindle prices are also a contributing factor in determining the cost with prices in the range of £30 to £150 per meter based on the materials used.

How much does a new staircase banister cost?

Hiring a professional is very important when trying to properly install a new banister since they are familiar with the process and work as per safety compliance. Fitting your new banister can be easily taken care by a general builder as well as a carpenter.

Below is a table depicting the average costs of different types of bannisters and spindles:

White oak bannister is around £105 and spindles are around £13.50.

Pine bannister is around £35 and spindles are around £7.

Primed wood bannister costs around £31 and spindles costing around £18.

Metal bannister is around £110 with the spindles being around £6.