Find a Shop Fitter you can trust in Newnham.

So you’ve decided to add some new French doors for your home? If yes, then you’re likely going to be concerned about whether or not you’ll require a planning permission to get started.

Properties are compelled to meet certain requirements and have proper permission in place in order to be in line with the regulations. Overall, you’re going to need planning permission in the following situations:

• If you want to construct something new.

• If you want to a make a major change to a building like an extension.

• If you want to change the use of your building such as converting it from residential to commercial.

Getting a new door or replacing an existing one doesn’t usually require a planning permission as it’s one of the less complicated improvements you can make to a home. As a result, this kind of improvement is normally covered by permitted development rights especially when you’re not constructing an extension for which to use the French door. However in the events whereby a permission is needed, it will most likely going to be granted if the proposed changes does not have an impact on the primary elevations of the house which is usually the front of the building.

It’s also important to note that permitted development can be limited by local authorities. These limitations include buildings in a conservation area, listed buildings, and if you happen to reside in an area of immense aesthetic appeal or other designated areas like National Parks. If such situation before you change your French doors, it’s important to consult your local authority before proceeding.

A real headache is having graffiti on brick. This material is porous which enables paint to sink with ease inside all of the surface’s grooves. Unlike wood, they can’t be scraped and if it happens to be an internal wall, it can’t be sand- or water-blasted. Here, chemical and gel masonry stripper are your best bet. And while stripping of the brick is not a complex task, it does involve a number of applications of stripper and multiple scrubbing which makes it very time consuming.

Basically, a fresh and wet paint should be soaked up with am absorbent material without wiping the paint in order to spread the stain. Once done, you can then proceed to apply a suitable solvent like white spirit. After this, wash the area using a degreasing agent taking care in the disposal of the run-off material.

With dried paint, simply scrape off the paint as far as possible and apply a paint removal using the following steps:

• Put on your safety gear like a face mask, safety googles and gloves.
• Apply the paint stripper over the brick wall with a brush starting from a corner at the top of the wall and then working outward and downward.
• Leave for the specified amount of time by the manufacturer. Then start to scrub off the masonry paint stripper beginning at the top of the wall again. Remove as many paints as possible.
• Use rags and warm water to wash the brick wall and allow it to air dry.
• Repeat the process over again to remove every form of stubborn paint that’s left.
• Use a white vinegar to spray the stripped brick wall and wipe off any residue of paint with a brush and rinse with water.

Do you have existing floorboards and wish to fit new solid wood floor over it? If you’re planning to go for a DIY effort, there are a number of things you should put into consideration before you even get started. Firstly, you should have it in mind that existing softwood floorboards are usually not flat, implying that the surface of the existing might not be ideal to serve as the foundation on which to put your new solid wood flooring. Secondly, if you’re going to lay the new solid floor on the existing floorboards, it would be wise to select wood that is a minimum of 18mm thick to make your new solid wood flooring a lot more stable.

If you discover that your old floor is not too even, there are two option you can consider to protect your investment. You can lay the new floor at a 90 degree angle over the existing one. In other words, you should lay the new floor lengthways if the old one is laid widthways. Using this technique alongside a method of fitting referred to as secret nailing will go a long way to make sure your installation efforts is a successful one.

The second option you can put into consideration when laying solid wood flooring over old ones is to lay chipboard or plywood over the existing floor prior to the installation of the new floor. Here, there will be an increase in the cost of your installation, however it will be more reliable and durable as it assists in ensuring the stability of your new flooring. Some benefits that comes with this option includes the freedom to lay the new solid wood flooring in any direction you want as well as the freedom to use any fitting method you deem fit. Click here to learn more about wood flooring.

Is Asbestos Dangerous?

The short and simple answer to this question is yes, asbestos is absolutely dangerous. Exposure to asbestos fibres and dust can lead to cancer, lung disease and lots more. It’s known to be so dangerous that no level of exposure to asbestos is considered safe. It has been banned in the UK since 1999 but exposure is till rampant due to the exceptions to the ban and there’s a good chance that you’ll find it in several older buildings and homes. And despite the ban in most countries, asbestos related health issues are still on the rise across the globe. People that are mostly exposed to this risk are those who’re exposed on the job as well as those who simply like to take on projects around the house containing asbestos insulation by themselves.

Furthermore, there’s a need to observe safety precautions when working with asbestos. If not, you’ll be exposing both you and your family to long term health risks. Below are some of the things you need to know about the dangers of asbestos.

✓ Exposure to asbestos fibres has no safe level. So it’s best to avoid exposure at all costs.

✓ Breathing in asbestos dust can lead to lung cancer, asbestosis and mesothelioma.

✓ If disturbed, asbestos can release dangerous particles of dust containing asbestos fibres.

✓ Mesothelioma is a type of cancer which mostly affects the lung’s lining. It has no cure.

✓ If you smoke, then the risk of inhaling asbestos is greatly increased.

✓ The number of fibres inhaled as well as the length of time that you’ve been exposed to it increases the risk of contracting asbestos related diseases.

✓ The symptoms of asbestos dust related diseases do not commonly come out until its about 20 to 30 years after the first exposure.

If you’re thinking about installing a carpet on your floor, one of the most important things you’d have to put into consideration before you proceed is the most suitable type of underlay to ensure your carpet is placed appropriately and maximum value is derived. This is a common issue for several homeowners and we aim to help you clear the worries once and for all. In this post, we’re going to consider the best underlay for your carpet to help you make the best informed decision moving forward. Let’s take a look!

In all honesty, there’s no straightforward answer to this question as the best carpet underlay depends on a number of factors. These factors include the type of carpet you wish to install, the type of flooring it will sit on ( e.g, concrete or underfloor heating), your budget, the room you’re laying the underlay in as well as your personal preferences in terms of durability, comfort, noise reduction and more.

When a carpet underlay is carefully selected, it’ll act as a shock absorber - perfect for protecting your floors against high traffic and impact, making sure that your carpeted floor looks good and healthy for a long period of time.

Generally, the best carpet underlay for bedrooms will be a thick, sponge rubber underlay or a wool combination felt variation which guarantees your comfort. For living rooms and lounges, the best carpet underlay would be one that is sumptuous and velvety soft to provide a comfortable floor. For dining rooms, you’d be smart to get a good quality hard-wearing carpet underlay as this area is one of the most frequently occupied areas in the home.

While many professionals will recommend a pressure washer to clean block paving, it’s possible to clean your paving without one – just scrub the affected areas with a firm bristled brush and use plenty of soap. Then, rinse off the area with clean water.

You don’t always need scaffolding to replace guttering. If your home is a bungalow, the tradespeople might only need a ladder to replace your guttering. It’s when your home is two storeys or more that scaffolding is more necessary.

You might not need full scaffolding for a simple two-storey home. Guttering specialists use scaffold towers, which are the platforms you see underneath the scaffolding, where the installation is relatively straightforward. You might need scaffolding to replace guttering when there are obstructions to towers being used – for example, if you have a conservatory or the ground is very uneven. It's more likely that specialist roofline companies will use scaffold towers when necessary. Sole traders that replace guttering as part of their services may be comfortable using sturdy ladders.

There’s no legal requirement to say that you must have scaffolding when fitting guttering, but it is a good idea when working on homes rather than bungalows. If you’re unsure whether you need full scaffolding for your gutter replacement project, get a few quotes from reputable businesses of different sizes. If you’ve been quoted by one company that you need full scaffolding whereas everyone else says that only towers are needed, it’s likely that the job is perfectly safe to carry out with just towers.

Oil stains on your concrete driveway can look obvious and unsightly. However, there are several different ways to remove them.

If you’ve only just spilled the oil, you can use a mixture of absorbent material, like sawdust, and solvent, like acetone or lacquer. Combine these, place them on the stain, cover and leave for about 24 hours. Then sweep up the mixture and rinse the area with water.

If you’ve got a small, older stain, you can use a detergent like baking soda, vinegar, washing up liquid or laundry detergent. Cover the stain with the detergent and leave for about 30 minutes. Then, add hot water and scrub the area and rinse. You might need to repeat this if necessary.

If it’s a larger, more stubborn stain, you might need to use a special degreaser. You can use this similarly to a detergent but make sure you follow the instruction on the bottle carefully.