Find a Shop Fitter you can trust in Dulas.

Regular maintenance is vital for keeping a garden looking its best. By carrying out regular gardening work, you can ensure that your garden is as functional as possible. Regular garden maintenance work could also save you money, as it is better to detect problems such as overgrown trees or rotten fencing early.

There are a wide range of household rubbish and wastes you can put in a skip. But unfortunately though, paint cans and leftover paints isn’t one. Furthermore, not only is a liquid paint restricted from skips and landfills, but they are also banned by the council. Frustratingly, because it’s hazardous to the environment and blockages it can create in the pipe, pouring paint right down the drain is never an option as well. So what then is the best way to get rid of your leftover paint? Surprisingly, you have quite a number of options which we’ll share with you.

• Is the paint unused and unopen? For unopened paints, you can simply return them back to the seller either for an exchange or for a refund. Obviously, this will require a receipt and if unavailable, then you might want to consider the other options below.

• Is it just little paint leftover? Since it has been specifically banned from skips and it’s just a small amount of paint, you can get a bit creative with the disposal method. Simply get a cardboard or other papers, paint it with the remaining paint and dry it out. Once dried, you can then dispose the cardboard or paper alongside other permitted wastes in the skip.

• Is it a large amount of paint? For large amounts, you can contact some of your friends or family who might need it to get the paints off your hands. If you are unable to dispose any or all, there are online platforms like Freegle or Freecycle where there are people willing and ready to get leftover paints in large quantities.

• Is it unusable? If positive, then the giveaway option is completely neutralized. The best bet here is to leave your paint out to dry if it has gone past its usable days, then take it to a household waste recycling centre.

Click here to learn more about skips.

Nobody likes bed bug! The sight of one can send even the most rational people you know into a state a state of panic. However, it doesn’t have to be so as there are a bunch of effective ways you can employ to get rid of bed bug infestation in a way that’ll fit both your budget as well as schedule. Although, it’ll take both diligence and consistency from your part, but it’ll take care of the bed bug infestation for good. In this post, we’re going to walk you through an effective process in which you can get rid of bed bug infestation in your home. Let’s take a look!

• Prepare your room for the treatment. This involves removing any items in the room that you can’t treat or that have already been treated. Cover the items that will be removed with plastic bags before moving them to the next room in order to prevent any unseen bed bug from infesting the other room. Also, remove the painting or art from the walls and check all the items that’s removed thoroughly to make sure the bed bugs are not transferred to the other room. If your mattress is heavily infested, you’d have to cover it with a bed bug proof mattress cover or a bed bug mattress encasement before moving
• Treat the crevices, cracks, tufts and folds of your home for bed bugs. Make use of a variety of products to kill and control beg bugs for a more effective result.
• Treat your mattress for beg bugs. To do this, make use of an aerosol spray labelled for bed bug treatment and spray the insecticide onto the mattress while focusing on the seams, tufts and folds until the mattress appears damp. Then allow it to dry before remaking the bed. Once done, you can also encase the mattress in a bed bug proof cover to prevent re-infestation.

There are a range of air conditioning units on the market. You should be sure to choose one with the appropriate cooling output for the room where it will be placed. Professional air conditioning companies will be able to advise you of the most suitable units for your rooms.

How to repair a hole in a flat roof depends on what material your flat roof is made from. If you have an asphalt, felt or EDPM rubber roof, the repairs are quite simple, whereas it’s a bit more tricky if you have a fibreglass flat roof. How to repair a hole in an asphalt flat roof If you’ve got a small hole in your asphalt flat roof, you might get away with using a paint-on fix from a tin. It’s best to use this as a temporary measure to tide you over until you can get in touch with a professional. If the hole is on the flashing, you can add heat-applied flashing tape to it, or use a patch of torched-on roofing felt. There are liquid systems you can use, but usually they’re only available to the trade. Repairing a hole in a felt flat roof It's a similar process to asphalt roofing if you want to repair a hole in a felt flat roof. Use a paint-on fix for a temporary solution, but the best way to repair a hole is to use a torched-on piece of roofing felt to cover the hole and make it watertight again. How to fix a hole in an EDPM rubber flat roof If the hole in a rubber flat roof is small, you may be able to get away with applying some lap sealant to the hole. Only use a small amount, as if you go for a more permanent repair later down the line all of this will need to be scraped off. You can also use a malleable piece of self-adhesive flashing – clean the area, add EDPM primer and stick the patch on from the centre outwards. Add sealant to the edges if you want to give it more water protection. How to fix pin holes in a fibreglass flat roof If you find pin holes in your fibreglass roof, it usually means there wasn’t enough resin used at installation. To repair the holes, you’ll need to sand down the entire roof back to the clear resin. Then clean the area with acetone and apply GRP roofing resin – the acetone ensures that the resin sticks. You might need two coats of resin to get rid of all the holes.

Yes, it is possible to insulate a shed. You might want to do this if you’re planning on working in it during the winter. A professional will be able to help you find an insulated shed or advise you on how to insulate a shed that you already have. Always seek professional advise first before attempting to do this yourself!

How Much Is A Locksmith?

If you’ve ever been locked out of your home or car, then you probably know how frustrating the experience can be. And even more so, when you don’t have a spare key kept somewhere. In this kind of scenario, a professional locksmith is your best bet to help in this type of bind and lots more. So exactly how much is the average cost of hiring a locksmith? This article will help you shed more light on this as well as the factors influencing the amount you may need to pay.

Locksmith provides a wide range of services including replacing your existing lock, installing a new lock system as well as re-keying a lock for a house or car. The services may also encompass installing garage door locks, repair damaged locks for doors and lots more. Depending of the locksmith service you require, the price of a locksmith can range between £65 to £90. For instance, if you happen to be locked out of your house, you may have to pay up to £70 to £80 and could even be higher or lower depending on the location, the lock’s type as well as the time of the day. Furthermore, if you wish to completely change the lock, this will cost you above £65 or more. You’ll discover the starting price list for each service of most locksmith companies on their websites.

To provide their service, a professional locksmith company will have to visit your location to help change the lock on your car, at home or in the office. Therefore, the minimum service fee your locksmith will charge will include factors such as travel fees. Generally, the minimum service fee to visit your home will fall within the range of £65 to £90. However, if your call comes in during the company’s off hours, you may have to pay more than the usual.

Two of the commonly used terms in the UK and Irish construction industry is “First Fix and “Second Fix First fix encompasses all the work required to take a building from foundation to stroking plaster on the interior walls. This comprises of building walls, floors and ceilings, and implanting cables for electrical supply and pipes for water supply.

Some claim that First Fix starts after the shell of the building is complete, and ends when the walls are plastered. Some of the elements in the first fix are as follows.

• Drain runs: must be downhill and straight

• Spare conduits: drawstrings

• Soil pipes

• Copper pipes

• Normal pipes

• Doorbell

• Door frames

• Pocket doorframes

• Stairwell

• MVHR (mechanical heat recovery ventilation runs)

• Push-fit or other plastic piping

• Electrical back boxes

• Electricity cable runs

• Telephone, data and audio-visual cables

• Socket location

• Security

• Fire alarm

• Sound insulation

• Plasterboarding

It is to be kept in mind that the list goes on as there are several things that you can do when you are building a house from scratch and it is impossible to cover each and every aspect in detail.

The second fix includes all the work after the plastering of a complete house. These include linking cables to the electrical fittings, coupling pipes to the baths and sinks and fitting doors into doorframes. Second fix work requires a tidier finish than the first fix.

Carpenters, electricians and plumbers get a proper idea on the division of work. They will also be able to visit the construction site at different times.

Project managers can simply report it as the "first fix complete" or "the second fix 50% done" and others would very easily understand.

Regardless of the fact that a construction company might specialise in a certain form of fix, be it the first or the second, they are obligated to have a rudimentary understanding of both and are required to perform them from time to time.