Find a Shop Fitter you can trust in Llandudno.

Does Home Insurance Cover Boiler Repairs?

When winter comes, your boiler is most likely to be one of the most used appliances in your home. It keeps operating for several hours to ensure your house remains warm and conducive and then during those cold evenings, it supplies the much needed hot water to guarantee a restive night. But with so much usage and many moving parts, you’d naturally expect your boiler to breakdown at some point especially if it’s 7 years old or above. So what’s the next line of action when it happens, leaving your radiators off and water cold? With the likely high boiler repair cost, it’s only logical to consider whether your boiler repairs is covered by your home insurance.

In almost all situations, the standard home insurance will not provide coverage for the cost of repairing or replacing a broken boiler. Being fully aware that boiler breakdowns are mostly caused by a lack or not so regular maintenance practices or servicing, most home insurance providers will exclude it from this from their offerings. In fact, a home insurance is more likely to provide coverage for the damage that has happened as a result of a broken appliance. For instance, the damage caused as a result of gas, oil or water leaking from a boiler are more likely to be paid for by the home insurance providers, but they’ll not pay for the repair or replacement of the broken boiler itself.

If you need our home insurance to cover your boiler repair, then you might just be able to get an extra insurance cover from your provider that includes a broken boiler repair. You can consult them to determine if this is possible as well as the cost to be paid per month. This will normally cost about £5 to £10 per month, but it gives you a peace of mind knowing you’re covered if your boiler happens to breakdown.

How To Plaster A Wall

In order to plaster your wall successfully, you’ll firstly need to get the appropriate tools and materials for the job in place. The tools you’ll need to have includes a trowel and bucket trowel, plasterer’s float, corner trowel, hawk board, two buckets, mixing stick or a paddle, adequate plaster, PVA , dust sheets, clean water, sandpaper, stilts or step ladder as well as a dust mask.

✓ Prepare the wall. You’d have to make sure that you lay down a dust sheet so as to protect your floor and also gather any possible spillage or debris of plaster, before you start working on the walls. Get rid of all the dirt, dust and debris as this is very important for the success of your project if you’re going to be plastering on a worn out and old wall. Also, cover the holes and cracks in the walls with a screen tape

✓ Apply PVA to the wall. This will help ensure the layer you’re using will not dry out at the same time.

✓ Mix the paster. Mix the plaster according to the instructions given in the manufacturer’s manual.

✓ Apply the plaster onto the wall. Upon cleaning of the walls and successful mixture of the plaster, the next step is to apply the mixture to the wall using the hawk board, trowels and a floating tool.

✓ Skim and smooth. After the the first coat has dried after waiting for about 30 minutes, the next step will be to wipe out the bumps and lumps using a trowel to smooth over the surface. Once this is done you can then scrape the wall with a devilling float.

✓ Apply the second coat of plaster

✓ Apply the finishing touches. This includes polishing your work by adding some water to the surface with a spray gun and using the trowel to further smoothen out the surface.

✓ Painting and wallpapering.

A plinth is a solid base that your cooker can sit on. It raises your cooker up from the ground and makes it easier to use. It will also make your cooker look in-keeping with your kitchen units if they sit on plinths too. However, a range cooker can also work effectively and look good without a plinth. If you don’t want one, make sure you check that the cooker you want doesn’t come with or need a plinth before you buy it. If you want to fit one in your home and are looking for an installer, we can help. Fill in our online form and we’ll put you in touch with up to 4 electricians in your local area.

There always seems to be lots of things to take care of when moving house. No matter how good your organizational skills may be, it Will be quite challenging to perfect all work without trace of slip.

Therefore, some questions are asked, how long does it actually take to move house? What is the average time to relocate? How long does the moving process take? How much time do you need to organize and perform a smooth and trouble-free relocation?These questions are very difficult to answer,Yet, you can get a rough idea of how long you are going to need to move to your new home.

1) Finding an Appropriate New Home

House hunting is exciting but very tasking. You look out for the perfect new property to buy or to rent in your new area one that is easily affordable and utmostly appropriate for your lifestyle.

2) Selling Your Old Home / Ending The Lease Agreement

If you’re moving out of a rented property, you need to recall the terms and conditions in your lease agreement and notify your landlord about your movement to a new house.

3) Ensuring Professional Moving Assistance

Unless you’re Moving just within the town or have very few items to relocate, performing a DIY move is not a recommendable option. You’re going to need professional moving assistance in order to ensure the successful outcome of your relocation, so you’re strongly advised to allow yourself enough time to research your moving options.

4) Putting Your Paperwork in Order

Have in mind that obtaining and/or updating all the necessary documents usually takes time, so you need to start preparing the paperwork as early as possible. Don’t forget that you will need some time to review and properly organize your papers, as well.

5) Organizing Your Belongings and Getting Rid Of Unwanted Items

When moving house, there is need to look through all your physical possessions and decide the fate of each and every one of them – set aside the things you’re going to relocate to your new home, throw away any useless.

6) Packing Your Belongings

Packing is the most strenuous and time-consuming task you’ll have to take care of when moving house.

7) Moving Day

The actual time your movers will need to take your belongings out of your old home and load them onto the moving truck depends on:

The number of boxes to be loaded onto the moving truck;

The number of furniture pieces and household appliances you want to relocate;

How well prepared you are,

The flights of stairs your items will have to be taken up or down or the free access to an elevator;

The moving truck accessibility.

8) Transportation to Your Final Destination

Depending on the actual distance between your old home and your new one, as well as on the traffic and the weather conditions at the time of your move, the transportation of your items may take from several hours (for a move across town) to about a week (when moving from coast to coast).

9) Unpacking and Settling In

It won’t take the movers long to unload your goods and take them into your new home (several hours, depending on the size of your shipment), especially if you know where you want each and every item to go. Upon your request, the moving experts will also help you reassemble furniture, connect appliances, and unpack your most essential items.

The time it takes to relocate depends on individual circumstance, Therefore, the average time to move house is estimated to be about 8-16 weeks.

Condensing boilers are the in-thing when it comes to modern heating systems in UK businesses and across the globe for a good reason. This is primarily due to the fact that condensing boilers happens to be highly efficient as it enables the fuel you’re burning to heat up your home go a lot further. Having a new high efficiency condensing boiler rather than an old G-rated non condensing boiler will not only enhance your heating controls, but also save you a lot of money annually. In this article, we’re going to take you through the basics of a condensing boiler. Let’s take a closer look!

If you’re interested in getting a greener and more efficient boiler, you simply can’t afford to look beyond a high efficiency condensing boiler. This is purely due to the fact that these condensing boilers happens to make a better use of the heat they’re able to produce from burning fuels like oil or gas ( in other words, they require less heat from the burner, which makes them a lot more efficient).

So how does a condensing boiler work? Unlike a non-condensing heat-nly boiler, some heat will be wasted in form of hot gases which are released from the flue. Meanwhile a condensing boiler captures some of the heat from these gases and puts them to use for heating up water that’s coming back from your central heating system. As a result, it requires just a minimal heat from the burner which make the boiler more efficient.

You should take note that all new modern boilers are condensing boilers. Therefore if you’re planning to replace an old boiler with a new one, you’ll definitely be buying a new condensing boiler and benefit from all the efficiency and savings that comes with it.

Two of the commonly used terms in the UK and Irish construction industry is “First Fix and “Second Fix First fix encompasses all the work required to take a building from foundation to stroking plaster on the interior walls. This comprises of building walls, floors and ceilings, and implanting cables for electrical supply and pipes for water supply.

Some claim that First Fix starts after the shell of the building is complete, and ends when the walls are plastered. Some of the elements in the first fix are as follows.

• Drain runs: must be downhill and straight

• Spare conduits: drawstrings

• Soil pipes

• Copper pipes

• Normal pipes

• Doorbell

• Door frames

• Pocket doorframes

• Stairwell

• MVHR (mechanical heat recovery ventilation runs)

• Push-fit or other plastic piping

• Electrical back boxes

• Electricity cable runs

• Telephone, data and audio-visual cables

• Socket location

• Security

• Fire alarm

• Sound insulation

• Plasterboarding

It is to be kept in mind that the list goes on as there are several things that you can do when you are building a house from scratch and it is impossible to cover each and every aspect in detail.

The second fix includes all the work after the plastering of a complete house. These include linking cables to the electrical fittings, coupling pipes to the baths and sinks and fitting doors into doorframes. Second fix work requires a tidier finish than the first fix.

Carpenters, electricians and plumbers get a proper idea on the division of work. They will also be able to visit the construction site at different times.

Project managers can simply report it as the "first fix complete" or "the second fix 50% done" and others would very easily understand.

Regardless of the fact that a construction company might specialise in a certain form of fix, be it the first or the second, they are obligated to have a rudimentary understanding of both and are required to perform them from time to time.

Should A Front Door Be Metal?

Being the home’s first access point, the front or entry door must be effective at preventing unwanted visitors or intruders from gaining entry into the house. Also, from a stylistic point of view, your door should be appealing and make both residents and guests feel welcome. These, rather contradictory standpoints, are best met by metal doors as they’re able to offer both security and beauty to any home or property. As a result, making them the perfect door material especially for front or entry doors. In this article, we’re going to look at what makes metal the proper material for front doors. Let’s have a look!

✓ It provides a grand entrance to both residents and guests. Front doors made out of metal are able to deliver a perfect blend between durability and elegance. They can be customized to suit the specific taste of the home or property owner or constructed to appear as inviting as the residents of the house would prefer. What’s more? It’s very pleasing to know that a visually appealing door goes a long way to add to both the style and value of any home.

✓ It serves a reliable security measure. Beyond the look of metal doors are their immense ability to provide protection from external elements. And since iron is sturdier than any other material incorporated in making front doors, burglars or any other unwanted visitors will find it a herculean task to forcefully gain entrance into your home. Even if you decide to make use of glass to add to the design, the integrity of the metal door will never be compromised.

✓ It’s a great value for money. Not only does metal doors provide both beauty and security, but they’re also more affordable than door materials like wood or fibreglass and requires only a little maintenance. With advanced technology, energy efficiency now constitutes part of the metal door offerings.

• Where in the country you live
• What colour you choose
• What pattern you choose
• Whether you choose a standard or a higher-quality concrete