Find a Shop Fitter you can trust in Marianglas.

The best type of guttering material will vary depending on the requirements of the property. For example, on listed buildings cast iron or aluminium guttering may be required to maintain the character of the property. Generally, UPVC is the accepted standard for almost all modern properties.

Clearing snow from a gravel driveway can be tricky – you need to remove the snow without taking the gravel with it.

If the snow’s quite light and dry, try using a leaf blower. You might find that this is enough to get the snow out the way. If it isn’t, start by using a shovel. Use this to clear the top layer of snow off your driveway, leaving about an inch behind. Then, use a rake to remove most of the remaining snow. This won’t take away 100% of the snow or leave all of your gravel in place, but it’s still pretty effective. You can then lay salt to melt away the rest of the snow and stop it turning into ice.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

Are you about to purchase a double glazed unit and wondering how to go about the replacement project? If yes, then you’re at the right place. Firstly, it’s advisable to hire the services of a reliable professional who can guarantee the best results for help especially if you lack proper training and experience in the field. However, we’ve put together this step by step guide to provide you with a detailed information about the double glazed unit replacement process. Let’s get started!

The tools and materials you require for the project includes tape measure, hammers, nail punch, scraper, spacing blocks, non-hardening butyl putty, high-security glazing tape rolls and beading tacks.

• Work out the glass size required. Simply use the tape measure to measure from frame edge to frame edge while also taking note of the thickness.

• When about to order, inform the glass merchant that the measurement provided are frame-tight. This will make him reduce the dimension a little bit, mostly by 5mm for clearance.

• Remove the beading and ensure to support the glass while doing so. If the glass units are fitted in wooden windows, you may need to cut the putty-based compound they’re normally sealed with to remove the glass.

• Lay out the beading in the window’s shape to make for easier refitting later on.

• If you’re working on wooden frames, wipe out all traces of excess installation compound using a scraper and clean the rebate with a soft brush.

• Trial fit the double glazed windows to ensure they’d slide into the frame without being forced.

• Plastic frame windows are usually in between a pair of gaskets, you should replace this with a hight security glazing tape. While for a wooden frame, simply apply strips of flexible non-setting butyl putty or high-security glazing tape on either sides of the glass.

• Install and centralize the glass in the frame.

• Press the nail wooden beading or plastic beading back into place.

How Deep Is A Septic Tank Buried?

Septic tanks may be an unknown concept to a lot of individuals in town and cities, but to those in the rural areas where certain things are unavailable, septic tanks are a necessity. After all, modern amenities such as appropriate plumbing is something we all need to live a comfortable and conveniently lifestyle.

If you happen to be interested in knowing more about the septic tank concept, you just moved into a house with a septic tank already built in or perhaps you want to have a septic tank system installed on your property, then you may likely want to know just how deep septic tanks are buried. Regardless of what the case may be, being aware of the depth of your septic tank can be a very tricky affair given the circumstances and even more so, when you’re ignorant of the positioning of the lids.

When it comes to the depth of septic tank systems, the general rule of thumb is that they should be buried within the range of four inches to four feet underground.

If you’re more particular about locating where your septic tank is built in, there are a few easy ways to find out. Firstly, you can let your sewer pipes lead you in. Generally, the tank as well as drain field are normally fitted parallel to the sewer line which extends from your home. Secondly, you can also look for visual clues to check if there’s either septic tank risers or clean out ports that is coming out from the ground. This way, you’ll able to tell right away where the septic tank system is located underground. However, if there are no visual clues then you can make some intelligent guesses. Simply take a look at your building’s piping and conditions of the property to have a good idea of where the tank is buried.

Gardens need regular maintenance and without it they can get really out of hand. When you’re thinking about how much gardeners charge, you should bear in mind the state of your garden and whether you need a one-off tidy up or want a regular ‘manicure’ of your garden to keep it looking neat and tidy. Gardeners generally charge in two different ways for their work depending on the job: with an hourly rate or with a fixed price. Generally, gardeners will charge an hourly rate of between £20 - £40 depending on their experience, the job and where you are in the country. They may also charge a minimum call-out charge since a lot of their day will include unpaid travel from job to job. If you don’t need your gardener for a full day, for example if you just need your lawn mowed, then they will probably charge a fixed rate. It’s unlikely to have anything to do with their hourly rate. We’ve found that the average fixed cost of a gardener is around £250 - but this of course includes small jobs like weeding and mowing to larger jobs like pulling out shrubs and replanting, so you may find that your gardener charges more or less than this. Bear in mind that most gardeners will charge a price that doesn’t include waste removal, since lots of people have compost heaps or garden waste bins. So if you need them to take the garden waste away, expect another £100 - £200 on top of your quote.

Nobody likes bed bug! The sight of one can send even the most rational people you know into a state a state of panic. However, it doesn’t have to be so as there are a bunch of effective ways you can employ to get rid of bed bug infestation in a way that’ll fit both your budget as well as schedule. Although, it’ll take both diligence and consistency from your part, but it’ll take care of the bed bug infestation for good. In this post, we’re going to walk you through an effective process in which you can get rid of bed bug infestation in your home. Let’s take a look!

• Prepare your room for the treatment. This involves removing any items in the room that you can’t treat or that have already been treated. Cover the items that will be removed with plastic bags before moving them to the next room in order to prevent any unseen bed bug from infesting the other room. Also, remove the painting or art from the walls and check all the items that’s removed thoroughly to make sure the bed bugs are not transferred to the other room. If your mattress is heavily infested, you’d have to cover it with a bed bug proof mattress cover or a bed bug mattress encasement before moving
• Treat the crevices, cracks, tufts and folds of your home for bed bugs. Make use of a variety of products to kill and control beg bugs for a more effective result.
• Treat your mattress for beg bugs. To do this, make use of an aerosol spray labelled for bed bug treatment and spray the insecticide onto the mattress while focusing on the seams, tufts and folds until the mattress appears damp. Then allow it to dry before remaking the bed. Once done, you can also encase the mattress in a bed bug proof cover to prevent re-infestation.