Find a Shop Fitter you can trust in Isle Of South Uist.

One of one of the most unfortunate parts of a woodworm invasion is that the signs of the issue are just visible at the end of the woodworm's lifecycle. This is when the woodworm beetle breaks free from within the wood to proceed its breeding.

Sign 1: Departure Holes in Wood

The signs to watch out for are what we call exit holes. When determining if you have energetic woodworm in your residential or commercial property one extremely aesthetic sign is the holes produced by the woodworm as they leave the wood. The dimension of the holes varies relying on the types of woodworm but generally they are between 2mm and also 5mm. If the woodworm trouble is energetic the holes will have a 'clean' or 'fresh' appearance. They can often just be identified up close, unless there is a huge problem as well as many departure holes with each other. Take a look at our examples below of different kinds of exit holes:

Sign 2: Presence of Bore dust

Another sign that you have an online woodworm invasion in your property is the presence of frass being left by the beetle when it chews its means with the timber. Frass is a dirt developed by woodworm. The frass or woodworm dirt is light in colour and looks virtually like very fine wood shavings. This frass is essentially woodworm waste and also it can be this waste that can aid us identify what kind of woodworm beetle is present. As an example ... the frass created by the wood-boring weevil is 'sticky' to the touch as a result of there being moisture present. The pictures below offer an indicator of what to watch out for:.

Sign 3: Tunnels within the timber brought on by woodworm.

Although this is an apparent sign that you have a woodworm issue it is additionally one of the least noticeable. The tunnels are developed by the woodworm as it makes it method via the wood.

Sign 4: Harmed wood

Damage timber is a clear sign that woodworm are causing damage to your residential or commercial property. Damage can range from weakened floorboards through to crumbling skirting boards. It is very important not to puzzle woodworm damage with the damages triggered by completely dry rot or damp rot. If you are unclear which of these home care problems are creating the damage then it is essential to speak to a hardwood expert to evaluate the lumber to prevent unnecessary treatments that might not be appropriate.

Sign 5: Actual beetles

Dead woodworm beetles might be seen near lumbers that are contaminated. Similarly, throughout the beetle 'flight period' between May and October, you could see real-time beetles as they arise from the woods. Learn more concerning the woodworm lifecycle right here.

Nothing provides you with more relief during the hot summer months than having a fully functioning air conditioning system at home. If you seek to keep your surrounding cool, then your best bet would be to install an air conditioning system. The system functions mainly by transmitting air over a specific temperature to outside from the inside and then replaces it with the cooled air. The outcome of this is a comfortable, conducive and relaxing environment to live, play or even work. Asides the cooling advantages provided by air conditioning systems, they’re also able to deliver other great benefits like removing pollutants and improving the indoor air quality of your living space. What’s more? They also feature filters which works to keep out both insets and parasites. So when making a purchase decision, most homeowners are usually concerned about the cost of buying and installing these air conditioners. If you’re also interested in knowing the cost, here’s what you need to know.

There are different types of air conditioning units with each having it own unique prices. Let’s have a look.

✓ Portable air conditioning unit - £300 to £600

✓ Fixed air conditioning unit - £800 to £1000

✓ Installation Charges - £130 to £200 per day

The prices of these air conditioning units varies depending on a number of factors. Some examples of these price influencing factors include the height of the ceiling, the exact number of both the doors and windows, construction or design of the property and finally, the number of people it can cover at a go.

You need to determine the air conditioning unit’s size as well as the size of the area. Generally, a ton of AC unit is perfect for cooling an area of about 400 square feet.

The Hive thermostat stand is relatively easy to install, however if you lack the necessary training or experience, this is a task you might want to leave to a professional to guarantee the best result while also saving you money and time. This guide will give you a good insight into the Hive thermostat installation process.

The installation of a Hive thermostat does require it to be connected to your home boiler. For this reason we always recommend you get a professional to install it. However once install the Hive Smart Thermostat is very easy to operate and move the controller around your home. To get started, you can follow these steps:

• Press the lever at the lower side of the thermostat and pull away from the front to detach the back plate of your device.

• Once done, simply hang the thermostat on the stand back plate and ensure it holds firmly in place

When it comes to Hive thermostat installation, you might also want to consider the positioning of the device in such a way to heat your home even more efficiently as its designed to be very sensitive to temperature. To identify the best spot for your Hive thermostat, let’s take a look at some of the dos and don’ts.

A Few Dos:

• Do maintain the position of your Hive Thermostat to keep a stable connection with the receive and Hive Hub.

• Do ensure that the position chosen is the centre of your home or a frequently used room.

• Do place the thermostat about 1 to 1.5 metres from floor.

• Do ensure that your thermostat is in a close proximity with the hub and receiver for a better functionality.

A Few Don’ts:

• Don’t place your Hive thermostat stand close to radiators, direct sunlight or other heat sources,

• Don’t position your device near or at places that can expoerience a sudden change in temperature such as the front or back door.

• Don’t leave your thermostat too close to curtains or ornaments.

Fitting a shower tray may seem look like a daunting task and well, to some extent, you’re perfectly right if you feel so. This is why shower tray installation is best left to a reliable professional who can guarantee the best results the first time especially if you lack the confidence required to pull off the task. If you wish to make this project a DIY task, then you’ve come to the right place! In this post, we’re going to take you through the adjustable shower tray fitting process to ensure you get it right the first time. Let’s take a look!

1. Position the shower tray at the spot where you intend to have it fitting and outline the tray with the help of a pencil. Install the adjustable riser legs, then proceed to adjust them to an even height. Make use of a spirit level to make sure the tray is flat and level, then connect the tray’s waste outlet.
2. Make sure that the riser legs are properly adjusted as this will make for a smooth fall to pass out the waste. Usually, 50mm fall per metre of pipework will be a good guide. Once done, ensure to fit the centre leg.
3. Determine the appropriate route to the waste pipe from the waste trap inside the tray.
4. Put the tray. Make use of a spirit level to ensure the tray is level to eliminate drainage issues and avoid overflow.
5. Examine the riser legs to see that they’re engaged with tightened up lock nuts.
6. Cover the gaps around the shower tray’s surroundings using the side panel.
7. Use a sealant to secure the shower tray between the wall and the tray.
8. Fix the side panels to the shower tray to conceal the pipework from view.

It might be possible to fit electrics in your shed, depending on where it is and what it’s made of. You should get in touch with a qualified electrician to find out whether it’s possible. Never attempt to run electrical cable from your house to an outbuilding!

If you’re looking to purchase and install an air conditioning system in your home or property, what immediately comes to mind is the type to invest in. When it comes to air conditioners, the available choices are numerous - from window units to central air conditioning, through-the-wall air conditioners, portable air conditioners, ductless split system, package terminal air conditioners, swamp coolers as well as geothermal cooling systems. In this post, we’re going to consider the various type of air conditioners in order to help you make the best decision moving forward. Let’s take a look!

• Window air conditioners. These are the most popular type of air conditioners which are typically mounted in a window. They possess an exhaust system which pushes hot air out the back and sides while the refrigerant cooling is pointed indoors.
• Central air conditioning. This is the most effective form of air conditioning if you happen to own a large home and want all rooms cooled at once.
• Portable air conditioners. Just like window air conditioners, these are self-contained air conditioning systems. In other words, portable air conditioners have all their essential components in one appliance just like in window air conditioning units.
• Through-the-wall air conditioners. These self-contained units that operates by bringing in warm air which is then exhausted while they send cool air back into the room ( similar to window air conditioners).
• Ductless split system air conditioners. Just like the name suggests, these are two-part air conditioners that are able to cool various areas within a home.
• Package terminal air conditioners. These are the type of air conditioners that are mostly used for cooling in commercial spaces like hospitals, hotels and the likes.
• Evaporative or “swamp” coolers. Although these aren’t as common as refrigerant air conditioners but they are just as effective. While conventional air conditioners make use of a refrigerant known as Freon, swamp coolers only incorporates air and water to function.

The cost of wood flooring varies by the type of wood and by the finish required. As a guide though oak solid wood flooring cost about £35 - £45 per m2. The average wooden cost by material are approximately £40 per m2 for pine, £45 per m2 for cherry, £60 per m2 for maple and £75 per m2 for walnut. This price does exclude the laying of the flooring and the underlay required.

When home or property owners decide to plant a Leylandii, they mostly think about how great it is as a hedging and screening plant and forgetting it also require a regular maintenance to keep in good shape. One thing about Leylandii are they do not re grow if you happen to cut back into the old wood. Once it turns brown, it will remain like that with no possible solutions to remedy the situation as they have little to no ability to regrow from the old wood.

In order to maintain your Leylandii hedge in good shape and order, that’s not too wide or too tall, then it’s recommended that it should be trimmed at least once a year. By doing this, you’re more likely to cut only into the new green growth which will enable the hedging plant look great and green with no brown patches. So when is the best time to prune a Leylandii hedge plant in a year?

Generally, it’s advisable to cut back mature or overgrown Leylandii hedges in the UK about two to three cuts between the months of April and August. By this time, your hedge plant will already be well established and ready for some maintenance and care. However, if there’s a chance that you might not be able to prune it on a yearly basis, the we’d suggest you get a slower growing alternative instead. Some of the alternatives which are slower growing and unlike Leylandii, can regenerate when cut back into the old wood are several types of Thuja as well as English Yew.

Below are some guidelines you can follow when trimming your Leylandii hedge:

• Do not cut Leylandii hedges during very forsty or hot weather.

• Do not cut the hedges during wet conditions to allow the cut dry and heal quickly.

• Make use of sharp tools.

• Cut on a cool and breezy day.