Find a Shop Fitter you can trust in Kinross.

Ultimately the double glazing company you use is responsible for the quality of work and to ensure your windows are of an excellent standard. This is why it’s important to get a warranty and use a Fensa registered installer. If problems emerge within a couple of years then it’s likely the installation was of a poor standard.Contact the double glazing company and have the issue repaired or new windows replaced. This doesn’t matter if you received a discount of free windows as part of the deal. As long as you entered into a contract the company is obliged to restore the windows.

Weeds growing on your gravel can look unsightly, so it’s worth taking steps to stop them sprouting up.

When you lay your driveway, make sure you use a weed proof membrane. This will help to stop most growth, although it won’t totally prevent weeds occurring. For any other growth, dig the weed out or use a weed killer.

How to build a scaffolding tower?

Scaffolding is every so often an essential portion of construction and home maintenance. You must set up scaffolding properly to make sure you and anybody else using the equipment stays safe. A mistake in establishing a scaffolding could lead to a serious accident. Scaffolding is an alternative to ladders. An advantage of using scaffolding is the bigger work range and flexibility it offers over that of a ladder. It possesses a stage for walking and for keeping all your tools.

The steps to build a good scaffolding

You will first need to find a secure and stable foundation on which you will build and put op the scaffold. Next, you will need base plates that will help to make the footing of the scaffold more stable. One of the chief worries here is to have the scaffolding equal and on safe ground.

Opt for casters.

If your project involves moving your scaffolding to work on several spots, include casters in your scaffolding setup. Do not forget to lock the casters after you get it in place.

Assemble the scaffolding frame.

Lay out the ends of the scaffolding. First, you will need to lift one of the end pieces and attach it with the upper cross brace. While you are lifting the second end piece to attach it to its upper cross brace, the far end of the previous brace should support it.

Make sure the scaffold is stable.

Move the scaffold until you think that the position is perfect, and make sure it is level and secure.

Place the planks.

Lift the boards through the scaffold bars and into the right place.

Secure access to the scaffold.

If you are using ladders to access the scaffold, use the ones that are designed specifically for that very type of scaffold.

Attach the guardrails.

Attaching guardrails is highly advised due to the risks of falling. You should also consider using tie-offs and other means of fall protection.

Inspect the scaffolding to ensure safety.

Thoroughly examine the scaffolding set up to make sure all pieces are secure.

With your finger probably hovering round the ‘order now’ button, one thing often comes to mind, what size of skip do you actually need? Being fully aware that there’s a huge array of skips sizes and hiring the appropriate size can make a whole world of difference when it comes to cost, efforts must be made to ensure you determine the right skip size before clicking on that ‘order now’ button.

To give you a better idea of skip sizes and the type of project that they are best suited to, we have decided to provide this simple breakdown that’ll make your decision process a breeze - quick and easy.

• 4 Yard Skips ( 3 cubic metres )

The 4 yard skip is best suited to small domestic projects like home or garden clean or clear outs, bathroom or kitchen refurbishments and the likes, due to its relatively small size. It has a capacity to carry about 30 bin bags at a go.

• 6 Yard Skips ( 6.5 cubic metres)

Do you want a skip for domestic purposes or for small commercial projects?if yes, then you should definitely give the 6 yard skip a shot. It has a capacity to hold up to 60 bin bags.

• 8 Yard Skips ( 6 cubic metres)

This skip size is best suited to large domestic tasks or light commercial projects. It has a capacity to hold up to 60 to 80 bags effortlessly.

• 10 Yard Skips ( 7.65 cubic metres)

With a skip size this big, both large residential and commercial projects can be handled with relative ease. Not only does it have the capacity to hold up to 80 to 100 bin bags, but also comes with an enclosed lid option, if you need an extra security for your property.

• 12 Yard Skips ( 9.18 cubic metres)

This skip size is best suited to both large residential projects and building sites. It has a capacity to hold up to 100 to 120 bin bags, and just like the 10 yard skips, it comes with an enclosed lid option for an extra security.

Click here to learn more about skips

Considerations

If you're thinking about making changes around your household that include working with wood, you ought to hire a local carpenter. Looking to fix a loose piece? Or looking for some drastic improvements? A carpentry expert might be the top choice.

General carpenters are expert woodsmen and know a variety of areas from grounds to gear. Maximum carpentry depends on a rudimentary set of skills which your worker may choose to build upon by specialising. For example, few carpenters have a talent for wood repair, building original constructions or manufacturing furniture.

Time

The extent of time it takes to complete a certain project is another consideration to be kept in mind. This is particularly essential if you are on a constricted timeline or dealing with time limitations. Most carpentry projects take about 13 hours to finish. Although, this is purely dependent on the intricacy of the project and the pre-arranged timeline you and your carpenter agree to.

The cost to hire a general carpenter in the UK amounts to £20 to £25 per hour on an average. Though, it is always imperative to speak with a professional in carpentry services about this.

General Carpentry Costs in the UK:

• National Minimum Cost is £20

• National Maximum Cost is £25

• The national average is around £22

Cost Comparison of Popular Carpentry Services in the UK (Average Hourly Rate):

• Furniture Refinishing is around £17

• A Cabinet Repair is around £23

• Finish Carpentry will set you back a minimum of £30

• General Carpentry is around £20

• Fine Woodworking is about £20

Carpentry is a brilliant method to improve your household and to help maintain its visual pleasantness. Finding a decent carpenter at the correct value is a vital area that needs undivided attention in terms of your project. Whether you're reinforcing your staircase or looking for a total renovation of the house that would change its look, a general carpenter will complete your project to the highest standards.

With the numerous benefits that comes with the installation of an external wall insulation in a building, it’s also important to find out whether it’s also safe before proceeding to fit one in your home. Firstly, to ensure that external wall insulation systems are safe, they must be BBA approved, which means they’ve been subjected to a thorough testing by the British Board of Agrement and therefore, suitable for use in UK homes.

Given the fact that cladding materials have recently generated a lot of debate and negative press about how reliable some particular materials are, questions are being asked of the safety and reliability of external wall insulation. However we must clarify that, although external wall insulation can be classified under cladding, it is very different to rainscreen cladding - which caused the Grenfell fire tragedy.

External wall insulation is completely safe. However, when it comes to fire, the safety of your system depends largely on the insulation type in question. The safest type of insulation you can have installed is the Rockwool insulation boards which are rated as Euroclass A1 non-combustible. The board is specially designed in such a way that it contains fire - preventing it from reaching the other areas of the building. They also do not produce harmful emission or smoke when impacted by fire.

Meanwhile, the Wood Fibre, is also a great insulation which is known to char and not burn. Contrary to many beliefs, it actually burns slowly creating this charring effect which produces an oxygen barrier that helps reduce the spread of fire.

To make your system safer, you can also make use of Fibreglass Mesh for reinforcement. It helps to improve the strength of the tensile which promotes the security of the boards attached to the wall.

Generally, a paved driveway is always subjected to regular usage and yours isn’t likely to be an exception, otherwise you won’t be here. Regular usage automatically necessitates regular maintenance of the driveway in order to extend its lifespan, make your property safer and add more value to it. This maintenance will involve a frequent inspection of the paved driveway so as to identify and repair divots, cracks as well as rutting. Paved driveways usually have a lifespan ranging between 15 to 20 years, but this can only be guaranteed when backed by regular maintenance activities. Failure to provide your paved driveway with a regular maintenance will lead to a rapid deterioration within just a couple of years after installation.

The issues commonly faced by paved driveways is usually different based on several factors such as the weather, your location, your property’s sub base as well as some other elements. The ability to identify the problems and solve or repair them on time is key to success while it’s also save you some time and money. In this article we’re going to look at how to go about do-it-yourself tasks that involves minor cracks. More intense damages are advised to be handled only by professionals.

✓ Prepare the area. Clear the debris, weed the plants or vegetation (if any).

✓ Use a strong spray from a garden hose to wash clean the cracks

✓ In the event whereby the crack is deep, simply fill it until it reach about a quarter inch of the surface with sand.

✓ Tamp down the sand to make it more compact.

✓ Apply a patching compound to the surface of the cracked paved driveway.

✓ Leave it for some time to cure.

✓ Once cured, you can then apply your sealant.

How to repair a hole in a flat roof depends on what material your flat roof is made from. If you have an asphalt, felt or EDPM rubber roof, the repairs are quite simple, whereas it’s a bit more tricky if you have a fibreglass flat roof. How to repair a hole in an asphalt flat roof If you’ve got a small hole in your asphalt flat roof, you might get away with using a paint-on fix from a tin. It’s best to use this as a temporary measure to tide you over until you can get in touch with a professional. If the hole is on the flashing, you can add heat-applied flashing tape to it, or use a patch of torched-on roofing felt. There are liquid systems you can use, but usually they’re only available to the trade. Repairing a hole in a felt flat roof It's a similar process to asphalt roofing if you want to repair a hole in a felt flat roof. Use a paint-on fix for a temporary solution, but the best way to repair a hole is to use a torched-on piece of roofing felt to cover the hole and make it watertight again. How to fix a hole in an EDPM rubber flat roof If the hole in a rubber flat roof is small, you may be able to get away with applying some lap sealant to the hole. Only use a small amount, as if you go for a more permanent repair later down the line all of this will need to be scraped off. You can also use a malleable piece of self-adhesive flashing – clean the area, add EDPM primer and stick the patch on from the centre outwards. Add sealant to the edges if you want to give it more water protection. How to fix pin holes in a fibreglass flat roof If you find pin holes in your fibreglass roof, it usually means there wasn’t enough resin used at installation. To repair the holes, you’ll need to sand down the entire roof back to the clear resin. Then clean the area with acetone and apply GRP roofing resin – the acetone ensures that the resin sticks. You might need two coats of resin to get rid of all the holes.