Find a Shop Fitter you can trust in Mallaig.

Asbestos refers to a group of minerals made up of tiny fibres. If you become exposed to these fibres and breathe them in, you’re at risk of contracting a dangerous lung-related disease.

Asbestos is strong and a good insulator, which means it was previously used to insulate and reinforce parts of buildings, like ceilings, roofs and guttering. Its use has been banned in the UK since 2000, but it is still present in lots of domestic and commercial buildings today.

Asbestos usually only poses a health risk if the material it’s contained in is damaged and its fibres are released into the air.

How To Fit Plasterboard

If you’re planning to renovate your house, then here is a must-read guide! Fitting of plasterboard is a crucial step when it comes to renovation. If you’re bringing down an existing lath and plaster for an upgraded surface or adding a new wall, a plasterboard is required for your project to be a true success. If you’re a novice with no prior practice or experience, you can protect your investment by hiring the services of a professional plasterer to guarantee the best results, the first time. However, we’ve put together this guide to give you an insight on how the plasterboard fitting process is done.

To get started, you’ll need a power drill, hammer, plasterboard nails or screws, broad knife, utility knife, measurement tape, pencil, ladder as well as a joint tape.

Before proceeding, you need to identify the number of plasterboard sheets needed to commence the project by measuring the height and width of the wall as well as calculating the square footage. If you possess a stud timber wall, the steps below will get you the best results.

• Measure the walls and mark the plasterboard where you’ll make the cuts. Start with a full sheet and cut pieces down in such a way that would fit

• Score the front paper of the plasterboard with utility knife. Fold the sheet to get a clean cut through the board and make use of the knife to the remaining paper.

• Place the first sheet against the wall and use an offcut to prevent the plasterboard from touch the floor.

• Make the plasterboard rest snugly against the wall in position and screw it firmly on each stud. Once done, fasten it at all the sheets’ edges and in a line down the stud to make for a firm connection. Follow the same process for the remaining plasterboard sheet till the wall is fully covered.

Most air conditioning units will need yearly maintenance. This will involve a full service and cleaning of filters. In very dusty areas units may need more frequent maintenance. Regular servicing will extend the life of an air conditioning unit. Keep a record of when this is done so you know when to contact someone!

If you have an older canopy or have experienced a significant amount of rain recently, you might notice water pooling on your canopy. This is probably because there is some slack in your canopy, which allows water to collect instead of draining it off. See if there are places on your canopy frame where you can tighten it to keep it taught, and this should solve the problem.

A gutter is part of the system that takes rainwater away from a building. Every home will have some form of guttering system to stop water from dripping off the roof and into the walls. It’s important to keep your gutters clear because if water starts to seep into your home’s walls, you’re likely to get damp.

A guttering system consists of half pipes, troughs, bends and downpipes. They’re usually cylindrical in shape but they may be square on some homes and in countries outside of the UK. Technically, the gutter is the part that you’ll see across your roof that collects rainwater. The water will then feed into a downpipe from your roof’s edge to the base of your home, where you can collect it in something like a water butt, or it will be discharged to a surface water drain or soakaway.

In early times, gutters used to be made from lined wood or stone. Lead was often used as the liner to stop rainwater from seeping through the material, but you won’t see it used much anymore. These days, most homes have uPVC guttering as it’s a hardwearing plastic that should last a long time. But you’ll also see gutters made from aluminium, cast iron and copper, especially on period homes or those in a conservation area.

Every home needs a guttering system to ensure that rainwater doesn’t affect the foundations of the property. It’s also important to keep the gutters clear of debris like fallen leaves, as this will cause them to overflow, potentially causing water to soak into the walls and causing damp.

A real headache is having graffiti on brick. This material is porous which enables paint to sink with ease inside all of the surface’s grooves. Unlike wood, they can’t be scraped and if it happens to be an internal wall, it can’t be sand- or water-blasted. Here, chemical and gel masonry stripper are your best bet. And while stripping of the brick is not a complex task, it does involve a number of applications of stripper and multiple scrubbing which makes it very time consuming.

Basically, a fresh and wet paint should be soaked up with am absorbent material without wiping the paint in order to spread the stain. Once done, you can then proceed to apply a suitable solvent like white spirit. After this, wash the area using a degreasing agent taking care in the disposal of the run-off material.

With dried paint, simply scrape off the paint as far as possible and apply a paint removal using the following steps:

• Put on your safety gear like a face mask, safety googles and gloves.
• Apply the paint stripper over the brick wall with a brush starting from a corner at the top of the wall and then working outward and downward.
• Leave for the specified amount of time by the manufacturer. Then start to scrub off the masonry paint stripper beginning at the top of the wall again. Remove as many paints as possible.
• Use rags and warm water to wash the brick wall and allow it to air dry.
• Repeat the process over again to remove every form of stubborn paint that’s left.
• Use a white vinegar to spray the stripped brick wall and wipe off any residue of paint with a brush and rinse with water.

While some people may see bifold doors as insecure, many bifold doors feature advanced security measures. Internally beaded strengthened double glazing is very secure. Choose a bifold door with a multi-point locking system for enhanced security. If your house is empty for long periods, always consider a blind solution to keep prying eyes out of your home.