Find a Shop Fitter you can trust in Orpington.

Can A Locksmith Make A House Key Without The Original?

If you’ve misplaced or lost the last set of your house keys, you’d probably be wondering if a locksmith can help replace the key without the original. If true, then you should know that a locksmith can cut a new key for you with the help of their expertise and tools without having to give them the original one. A professional locksmith can achieve this in three separate ways. Let’s have a look!

• Cut The Key By Code

What makes physical keys unique is basically the spacing and depth of their cuts. During the manufacturing process, manufacturers often stamp some characters also called key codes on the lock or include them in the lock’s manual. With these characters, a locksmith has all that’s needed to create a new key without having to see the original one. Using HPC Blitz key generator or any other code cutter and the right key blank, a locksmith can give you a new key. However, in cases whereby the key does not come with any code, the locksmith can obtain the needed information via the manufacturer or the retailer who possess such information.

• Impression The Lock

To complete this key cutting process, the locksmith will need a key blank, a file as well as a vice grip. This procedure entails inserting the right key blank into the lock, followed by turning it to bind pins within the locks cylinder. This process will enable the locksmith determine the sections that requires to be filed on the key blank. It also involves inserting and removing the key from the lock several times in order to get all the needed cuts. However, it must be noted that various key blanks like brass, steel and aluminium blanks require a special attention to ensure they do not break during the process

• Disassemble The Lock

To disassemble a lock, the locksmith will first pick the lock. However, in the event whereby a broken key is stuck in the keyhole, then you may want to consider an entire lock replacement. The disassembling process is a very delicate one that involves the internal mechanisms of the lock and should not be done unless by a true professional.

If you are planning to invest in a new satellite dish, then you’d probably want to know the most suitable receiver to incorporate. If you have this same concern, then you’ve come to the right place! In this post, we’re going to give you a good insight into the world of satellite dish receivers in order to help you make the best-informed decision possible moving forward. Let’s take a look!

Firstly, it must be stated that there happens to be a plethora of LNB types, makes and models available in the market today and picking the right one for your satellite is crucial as the wrong one may imply your satellite will not work. The most common LNB types are single LNBs and Quad LNBs.

The major difference between all types is the amount of output possessed by each LNB. This is what allows extra satellite receivers to be added for additional TV points as well as the inclusion of satellite PVRs which features recordable, play, pause and rewind TV services. For example, a single LNB possesses just one LNB connection for a coaxial cable to be attached. This allows you to connect a standard satellite receiver such as Freesat box or Sky. There are also dual or twin LNB, quad LNB and octo LNB which allows for two (or one satellite PVR), four (two PVRs or one PVR and two standard satellite receivers) and eight separate satellite receivers (four PVRs or combination of both) respectively. There are many other LNB types you can choose from with varying features, so it all depends on your requirements.

On the grand scale of things there isn’t a huge difference between B-rated windows and A-rated windows. Consumer watchdog Which? have calculated an extra 6.5% would be saved on energy bills with A rather than B rated panes. Be aware that A rated windows are slightly more expensive, however.

Most people want to connect solar panels to a battery when they’re not at home all day to use the electricity they generate, or generate more than they consume over a day. Solar batteries are a great way to maximise the savings on your energy bills since you can use every unit of electricity you generate.

If you want to connect your solar panels to a battery, the best – and safest – way is to ask an MCS-registered company to do it for you. They’ve had lots of training and hold qualifications in handling electricity and installing solar batteries, so they will be able to recommend the best battery for your solar panels and for the among of electricity you use. Some of the brands they might recommend include Tesla, SolarEdge and SolaX, but there are many more to choose from. If you want to send electricity to the grid from your battery to receive Smart Export Guarantee (SEG) payments, it’s also worth leaving installation up to a registered installer. This is because you might not be eligible for payments if your battery wasn’t installed by an MCS-registered company.

However, if you do want to have a go at connecting your solar panels to a battery, it’s worth finding out whether your system is ‘storage ready’. Most relatively new systems will be, since batteries are becoming more commonplace. If your solar panels are storage ready, they will have an inverter that can easily have a battery added to it. If this is the case, then you should be able to buy the solar battery you want and follow the manufacturer's instructions to install it.

But it’s worth remembering that electricity is extremely dangerous when handled improperly. If you don’t get the solar battery connected properly and something goes wrong, it could cause a fire or you could electrocute yourself. If a fire breaks out due to your battery, it’s unlikely that your home insurance company would pay out since you connected the battery yourself. That’s why it’s always worth speaking to a registered installer to install a solar battery storage system for you.

How Much Does A Handyman Charge Per Hour?

Do you need the professional services of a handyman? If yes, then you’d probably like to know the hourly rate a handyman charges in order to set a budget and make the necessary plans. Here, we’ll discuss the amount charged by handymen per hour and reason for the differences.

The fact is, there’s no accurate or single answer for all handymen as the project varies and the handyman mostly charges based on the type of work to be done. However, there are also other handyman pricing strategies which includes project pricing. When you’re being charged based on the tasks involved, you should ensure to ask the handyman for possible discount as several handymen will offer a considerable discount for bulk projects or tasks that can be completed on after the other. If the task is a small, one-off job then you’re likely to pay a minimum charge fee which would usually be higher when compared to the task being part of a larger project. Consequently, the first one hour of a handyman’s service will usually attract a premium, while the charges for remaining hours after the first will be a smaller charge. This is mainly due to the fact that a handyman will need to travel to deliver a service and it’s generally going to be a lot more economical to arrive on the site and take on a couple of tasks sequentially.

Moving forward, you should be aware that there’s an economy in sticking to one handyman. Handymen usually charge less to repay clients for their loyalty as they’d already have an idea of the client’s projects and needs which makes the job a lot easier. However, generally a handyman will charge within the range of £20 to £30 per hour.

How long it takes to fix a roofing sheet on a commercial property will depend on the size of your roof and how difficult access is. Corrugated iron roofing sheets are much easier to fit than other roofing materials such as clay tiles or EDPM rubber, so that will work in your favour.

The size of the team of the roofing company you engage will also make a difference. If they have a lot of tradespeople working on your roof with lots of experience, it will take less time, while if there are only a couple of people it will take longer.

Another thing to bear in mind when considering how long it will take to fix a roofing sheet is the weather. If it starts to rain, the contractors will probably have to stop and wait, as the roof will be too slippery to work on.

In general, it should take between 1 and 3 days to fit roofing sheets on a commercial property. If you’re not having a full roof replacement, it may only take one day, whereas a completely new metal roof could take up to 3 days.

If you’re thinking about spraying your upvc, then one of the first things that naturally comes to mind is the price of completing such a task. If you’re also interested in determining the price, then you’ve come to the right place! In this post, we’re going to take a look at the total cost involved in UPVC spraying.

First and foremost, it must be stated that UPVC spraying is an industry that’s highly competitive. And as you would have guessed the prices are largely influenced the experience and reputation of the company you opt for. In other words, the new entrant companies are usually the cheapest but their works are not particularly the best. Therefore, for a high quality job, it’s always recommended to make use of a well established and highly reputable company in the industry.

If you’re going to hire a vastly experienced and reputable firm in the industry, then you should budget about circa £140 to £160 per window, circa £210 to £250 per door and frame, circa £260 to £300 for a large garage door and circa £600 to £800 for a three bed semi detached house.

These prices include materials, labour as well as other related costs. However, you should note that they’re only estimated prices and you’ll have to call in a professional in order to get a more accurate quote. If you’re looking to paint all the UPVC in your home, there are usually discounts that will be provided based on the work load. What’s more? If there’s a need for scaffolding, then there can be a bump up in the price.

How To Paint A Radiator

First thing you should know about painting a radiator is that normal paints can’t be used to do the job, however that doesn’t mean it’s not cheap, easy and fun - it definitely is and even more so, when you do it the right way. With a few radiator painting hints here, it’s only a matter of time before you start painting your radiators every colour of the rainbow delightfully.

Painting a radiator is not one of the most common tasks on most people’s to do list, so we’ve created this article as an encouraging nudge to allow more people let their creativity manifest through a brush. However, this is not to say that this is a task for everyone though as you won’t like to make a mess of your radiator. If you know you can’t pick up a brush or bend a knee or your back here and there, then you probably shouldn’t. In such cases, hiring a professional painter would be your best bet to get the best results while also saving yourself some time and money.

To paint a radiator, you’ll need a paint brush, suitable radiator paint, dust sheet and a radiator paint brush (optional).

✓ Turn off the radiator and leave it to cool off. Once it’s cold, simply wipe out all dust, dirt or grease from the radiator.

✓ Protect the flooring under the radiator from any paint splatter with a by spreading out a dust cloth.

✓ Use a suitable radiator paint to brush out well and lay off evenly in a direction. Leave it to dry overnight. Then apply paint on the radiator in direction of the grooves with the help of a top quality brush.

✓ Paint in sections and move across the radiator slightly overlapping until you get to the end. The move to paint the other areas.

✓ Leave the paint to dry as instructed in the manufacturer’s instructions, then apply a second coat if necessary.