Find a Shop Fitter you can trust in Bury.

• Don’t buy cheap solar panels – while it might seem tempting, make sure you choose MCS-certified solar panels. Any reputable installer will recommend high quality solar panels, which is another reason to have them professionally installed rather than doing it yourself.
• Ensure that your installer uses non-combustible mounting systems and frames.
• Check your system regularly for signs of pests gnawing through cables.
• Keep your solar panel system regularly maintained with proper testing and servicing carried out as recommended by your installer.
• If something doesn’t look right to you, get in touch with your installer and ask – they should be more than happy to help.

The National Insulation Association strongly cautions against DIY spray foam setup. Spray foam insulation should constantly be installed by a specialist.

Installers need to be fully trained to apply the foam appropriately and should be evaluated by the British Board of Agrément (BBA- a UK trade body which accredits installers' competence). The spray foam item need to additionally have a BBA certification or matching. The setup should also adapt with the,construction guidelines, and also health and safety guidelines.

It is crucial to make the walls of your bathroom waterproof, and bathroom wall panels or bathroom cladding is not only a great way to do that, but its also the easiest way to update the look of your bathroom. When it comes to adding wall panels to your bathroom, there are a large selection of designs to choose from which means you’ll always find something that’ll suit your space. So how do you have them installed? With this brief guide, you’ll learn everything you need to know about the bathroom panels installation. Let’s have a look!

1. Get the right tools and supplies. You’ll require a handsaw, jigsaw, or circular saw, hacksaw, drill, hammer, 1200mm spirit level, sealant gun, suction cups and tape measure.
2. Prepare the bathroom. Ensure that the bathroom walls are degreased, clean and, dust and dirt free. Also make sure that its flat and even with a spirit level.
3. Make sure a fixing method is in place. If not, make use of treated battens as a fixing method. Fit all battens in such a way that’s plumb and parallel.
4. Fit the shower tray. Take a measurement of the shower tray to identify the length of the seal strips that is needed while also making room for the shower screen.
5. Add the seal strips.
6. Cut the panels to size. Mark the bathroom wall panels and cut to get the right measurement in both height and width. Also ensure to make room for pipe and shower head holes at this point.
7. Install the panels.

How Much Do Painters And Decorators Charge?

If you’re thinking about painting your home or property, then one of the first things that crosses the mind is the amount charged by painter or decorators to carry out the project. However just like any other home improvement projects and as with most tradesmen, the amount charged by a painter and decorator largely varies from job to job depending on a plethora of factors. These factors include your location, the urgency at which you need the job done and whether or not a specialist equipment would be required.

For painters and decorators, one of the biggest influencing factors that determines the price to be charged is the size of the room. For instance, if you have a large room to be painted, it’s definitely going to cost you more than a smaller room. And same applies to multiple rooms when compared to single room. In other words, to get a more accurate cost estimate from your tradesman, you’ll need to have a good idea of the size of your room or rooms. So let’s take a closer look!

✓ Painting a mid-sized room. The question here is, how do you know if your room is medium sized? The room will have a size of about 3.5m by 5m or a room that can conveniently allow up to 6 to 8 people. The price range is between £240 to £410.

✓ Wallpapering a mid-sized room. This uses the logic as painting a mid-sized room but the price can differ due to difference in materials used. The price range here is between £204 to £420.

✓ Painting a large ceiling. Painting a ceiling is very similar to painting a wall but its not as straightforward and will consume more time. The price ranges from £286 to £5476.

Often referred to by many as the holy grail of home improvements, house extension comes with a wide range of benefits which makes it easy to see why the extension could be a great uptick in the potential price of your property in terms of sales. So if you’re looking to build a new home extension but still not convinced about the project, we’re here to help you. Being fully aware any home construction work is usually a heavy investment, there’s a huge need to be set on your decision before scheduling the commencement of any work. So are house extensions worth it? Below are some of the top benefits offered by house extensions to help you decide if it’s the most suitable route for you.

• Add To Your Home’s Value

Building an home extension is a great way to add value to your home before selling. Increasing the living space of your home is an incredible appeal to many buyers which significantly increases your property’s total value. However, you must ensure that the extension is impressively designed using top quality materials in order to generate more value.

• Good Alternative To House Moving

The most common reason for moving is usually due to a lack of sufficient space, but with house prices steadily on the increase a cost effective alternative is highly sought after. This alternative is house extension which creates more space for the household to spread out and have more privacy.

• You May Not Require A Planning Permission

You can extend your house and still not need to apply for a planning permission. To achieve this, simply comply with the laid down rules set under the permitted development rights.

• Extra Living Space

If you fill you’re starting to outgrow your existing structure and do not buy into the idea of moving, then your best bet might just be to extend your home.

Once you’ve chosen the perfect feature to suit the shape and style of your bathroom, it’s time to start putting it to good use. Read on for a step-by-step guide on how to install a bath, but first of all, below are the preparatory tools;

Preparation

Before you install a bath, there are some things that needs to be taken into considerations.Once you have decided where you are going to install your bath, use an electronic detector to make sure there are no hidden pipes or wires in the walls where you will be securing the fittings. It is also advisable to choose walls that have a stud so that you can attach your fittings so strongly.

When assembling your bath, lay it on top of a rug or blanket to ensure it doesn’t get scratched, and remove any protective film from the areas you will be working on, such as around the drain and tap fittings, as well as the sides where the bath will sit against the wall. Always turn off the water at the mains beforehand.

Note: The installation process will vary, depending on the design of your bath. It is always necessary to consult the manufacturer instructions alongside this guide.

MATERIALS

• Drill and appropriate drill bit
• Screwdriver
• Spirit level
• Tape measurer
• Hammer
• Pencil
• Caulking gun and silicone sealant

You’ll also need an extra pair of hands to help manoeuvre the bath into place.

Step 1

Attach the legs and the fittings by securing the appropriate bolts and channels, and then attach the feet.

Step 2

Measure and adjust the bath's position, Once you are sure that your bath is level, mark the places where it will be secured into the walls and floor. If your bath comes with wall fittings, use your pencil to mark the place where they will be secured to the walls. Do the same for the floor fittings.

Step 3

Prepare the wall for the fittings, align it with the wall at the location you marked and use your spirit level to make sure it is even. Drill holes and secure in place, making sure you use fittings that are suitable for the type of walls in your bathroom.

Step 4

Secure your bath by moving the bath back into the final position and align it with the holes you created, or on top of the timber batten. Once again, check that it is level. Turn the water back on and check for any leaks.

Step 5

Seal around the rim, fill it with water and trace silicone sealant around the edges, where the rim meets the wall. Allow it to dry for the recommended time.

Having its usage banned in air conditioning systems and many other refrigeration applications due to the danger it poses to the ozone layer, several companies that are affected by the R22 legislation would possess a policy to identify specific recommended alternatives. If you’re also affected by this new legislation, then you’ve come to the right place. Generally, the alternative that’s selected is usually dependent on the business unit level as well as the business’ energy efficiency requirements.  In this post, we’re going to consider some of the recommended alternatives to the R22 refrigerant. Let’s take a look!

• R140a. This refrigerant is commonly used in industrial refrigeration, residential air conditioning, industrial air conditioning as well as commercial centrifugal compressors.
• R134A. This refrigerant is commonly used in domestic refrigeration, commercial refrigeration, transport refrigeration, residential air conditioning, commercial centrifugal compressors and mobile air conditioning.
• R407C. This is commonly incorporated in industrial refrigeration, residential air conditioning and commercial air conditioning.
• R407A. This type of gas is commonly incorporated in commercial refrigeration, plug ins as well as vending machines.
• MO99 ( R438A). This gas type is common applied in commercial refrigeration, plug ins, vending machines, industrial refrigeration as well as residential air conditioning.
• RS-44b. This is commonly used in all refrigeration systems.

These R22 alternatives are all believed to be environmental friendly having little to no impact on the ozone layer. However, one drawback possessed by of these alternatives is when POE oil is incorporated. This can result in excess moisture which causes acid build up inside the refrigerant lines. What’s more? These refrigerant alternatives also work at a higher pressure which means that it may cause more wear and tear on components.

How To Remove Asbestos

Asbestos are naturally occurring fibrous material that used to be incorporated into fabrics or mixed with cement for insulation purposes be it electrical or building. As it’s highly dangerous and life threatening if disturbed, the material has been in the UK since 1999, however there are some exceptions. If you happen to reside in a house that has been in existence prior to 1980, then there is a chance your house contains some asbestos. You may discover it in your home when carrying out some DIY tasks or renovation. And once you do, you should waste no time in having it removed as the longer you’re exposed to it, the more life threatening it becomes.

Removal of asbestos is a task you should never try to do by yourself as it becomes harmful when disturbed. In an event whereby you suspect something to be asbestos, do not touch but rather have it isolated and call in a specialist for help. So it’s therefore not recommended to attempt asbestos removal as a DIY project unless you’re are experienced in the techniques below:

✓ Before you get started, it’s crucial to wear the necessary protective gear. These include wearing a respirator, a disposable coverall, disposable rubber gloves, rubber boots as well as safety eye goggles. And ensure that you remove all protective gear clothing and gear before exiting the containment area.

✓ Remove the materials and place in asbestos waste disposal bags

✓ Ensure to remove the asbestos without breaking it up.

✓ Make use of double bag and seal all debris containing asbestos.

✓ Wipe down all surfaces with a damp cloth

✓ Fold and roll the polyethylene sheeting on the floor and dispose them same way as the debris - double bag and seal.

✓ Clean all tools and equipments used.

✓ When done, ensure to wash face, hands and bathe thoroughly.