Find a Shop Fitter you can trust in Barkingside.

How To Replace A Flat Roof

Is it high time you replaced your flat roof with a new one? If it’s time, then you probably shouldn’t waste another minute! Flat roofs come with multiple upsides and happens to be a lot more affordable than many other options (especially for starters). Not only do they add to your home’s curb appeal and requires a relatively low labour costs as there are minimal risks involved, but they’re also more accessible for maintenance purposes and aren’t as exposed to damage as a pitched roof. However, we’re not here to discuss the various benefits of installing a flat roof, but rather tell you how to install one. If you lack proper training and experience, we’d recommend you hire a trustworthy professional that can guarantee the best results.

• Wipe the entire roof system clean.

• Detach and replace rotted roof sheathings.

• Detach and replace rotted fascia

• Hire a qualified air conditioning professional to disconnect the existing AC units.

• Introduce new aluminium air conditioning stands and secure against the deck.

• Let you qualified air conditioning professional reconnect the existing AC units.

• Put in place the new air conditioning quick disconnects.

• Attach EPS fanfold insulation in such a way to cover the surface of the entire roof and secure it firmly in place.

• Attach the tie-in roof materials where necessary.

• Attach roofing membrane to cover the entire area of the roofing.

• Attach membrane to the entire roof’s perimeter.

• Attach new perimeter flashings (fascia bar, fascia cap and drip edge), secured on the centre at 6. Make use of a good sealant to secure the fascia bar or fascia cap’s top flange.

• Attach boots on plumbing seal and stacks.

• Identify the existing vent stacks and seal, and put curbs

• Put safety walk pad network from the access point of the roof to the air conditioning units.

• Attach rooftop signs for roof traffic personnel

• Tidy up and clear out the debris

How To Replace Flat Roof Felt

Also referred to as tar paper, roofing felt is installed underneath the roof’s shingles to help deny water access to your home. Installing the roofing felt in overlapping layers builds a water barrier in situations whereby the weather damages or blows away the shingles. Although the application of a roofing felt on a flat roof is relatively easier and safer than working on a peaked roof, it’s advisable to take enough care and precautions. If you lack proper training and experience for this task, we’d recommend you employ a reliable professional to guarantee the best results and save you from further headaches especially in cases whereby unfortunate errors are made. This step by step guide will give you a good insight into the flat roof felt replacement process.

• Take a measurement of the width and length of the roof.

• Calculate the square footage by multiplying the numbers.

• Multiply the square footage gotten by three (it’s advisable to install three layers of roofing felt to create a really strong weather barrier).

• Use a claw hammer to remove the existing roofing felt.

• Use utility knife to cut the new felt to fit the length of the roof.

• Place the first piece along the roof’s edge and use a hammer tacker to tack the felt in place with staples or galvanized nails and hammer.

• Put the staples or nails at every 6 inches along the side touching the roof’s edge as well as down the short sides.

• Repeat the same process for the second piece, laying it out beside the first row of felt.

• Cut a piece of felt to the appropriate length using a utility knife to begin the second layer of roofing felt, and cutting it in half, lengthwise.

• Apply construction adhesive along the first row using a trowel.

• Press the first piece for the second layer onto the adhesive. Repeat this process until the roof is covered with a second layer

• Apply construction adhesive over the second layer to install the third layer. Begin with a full piece of felt without cutting it in half.

• Overlap each piece by 2 inches until you’ve completely installed the third layer.

• Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
• Add a central step riser to stairs wider than 900mm to prevent them buckling
• Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth

• Step treads (the actual step themselves)
• Step risers
• Coach screws
• Deck screws
• Saw
• Drill

1. Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
2. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
3. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
4. After drilling pilot holes, screw the treads into the risers at each end with deck screws.
5. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.

You should inspect your roof twice a year, ideally after rain or snow, to see if it’s draining properly. Also in the Spring to check for damage that may of been caused over the winter months that will need to be put right before the next winter. Have an inspection carried out if you are unsure.

Orangeries are being built by thousands in the country year in year out and for good reasons. Not only do they provide a cost effective alternative to moving home and boosting your property’s value, but can also be used all year round. If you’re looking for a room for all seasons, then you simply would not want to overlook building an orangery. They can be quite cosy in the winter months protecting you from the wind and rain, and keeping you warm, while you can throw the doors and windows to enjoy the sunshine during the summer months.

Orangeries can be used all year long as they’re made mostly of components which makes them stay warm all through the year, which is unlike conservatories that’s almost wholly made of glass meaning they are not suitable to be used during the colder months. This implies that orangeries can be used for almost any purpose throughout the year regardless of the time of year it is. What’s more? With a plethora of style and options of orangeries you can choose from, there’s hardly any space you can’t fit an orangery, be it small or large. In recent times, more and more homeowners are now using their orangeries for a variety of purposes such as game rooms, chill out area, lounges as well as dining rooms. They have this special ability to create a seamless transition from your home to your garden while also allowing you to alter the room’s layout all year round depending on your needs at the time.

How To Choose A Locksmith

Did you accidentally lock out yourself of your car, house or business. There are so many reasons you might find yourself in need of a professional locksmith. However, not all locksmith services are created equal and with so many out there, it can be very challenging selecting a professional locksmith when you need one. Therefore, how do you choose a professional locksmith that’ll guarantee the best results while also saving you time and money? Here are some tips you can put into consideration before making a decision.

• Go For A Certified Locksmith

One basic rule when it comes to hiring a locksmith is never go for an uncertified one - no matter what! This is because only a certified locksmith can guarantee the best outcome with their in depth knowledge and also having proven themselves worthy of your trust. What’s more? With so many scams out there that are locksmithing-associated, going for a certified company will give you the much need protection and peace of mind.

• Go For Local Companies

Going for local locksmithing companies does only mean you’re supporting businesses in your area, but also guarantees you a better assurance of a great service than going for one several miles away.

• Go For Family Owned Companies

Selecting a family owned locksmithing companies come with a wide array of benefits. You’ll get to speak directly with the management of the company when faced with some concerns or questions and also a this type of common normally has a vested interest in your safety as well as community.

• Watch Out For Red Flags

This is important so you don’t get played. Some companies can falsely claim to be certified by ALOA. Others travel in some unmarked vehicles while also refusing to identify themselves in the proper manner. You can also encounter some who hides under different names just to be able to serve a wider region. Another red flag is the failure of the locksmithing company to request verification that you own the property which is what all certified locksmiths have been trained to do before proceeding with their services.

Is your tiny bedroom getting you worried? Well, you’ve come to the right place. When the bedroom is small, it’s normal to get a bit confused on how to plan it out. The furnitures and colours to use, the placement or arrangement of items and many others create a huge headache for several home owners. It not uncommon for it to seem like your options are limited to only squeezing a bed somewhere, however there are actually some ways to pack a lot of styles into your limited bedroom space. In this post, we’re going to put you through some incredible small bedroom ideas to help you maximize your space and inject new life into your room.

• Keep the layout simple. The only magic trick to a small bedroom is having a simple layout. You don’t have too many choices here but always have in mind that the functionality is equally as important as the style.
• Go for accents that add colour. For a small room, you should not be afraid to go dark using colours like gray, navy blue and the likes,but also ensure you bring in plenty of light in order to keep the room from actually feeling dark and claustrophobic. Once done, you can add you favourite colours using accents achieve this purpose.
• Create the illusion of space. You can create an illusion of space by hanging drapery as close to the ceiling as possible. A great trick would be to match the fabric to the wall colour for the best effect.
• Remove the clutter. Don’t crowd the space with stuff. There should be an ease of movement and you can also make sure the room is clean at all times
• Bring in the outdoors. It’s always a great idea to add some life into your small space.