Find a Shop Fitter you can trust in Belgravia.

Since it’s very common to find heated floors in the bathroom, it becomes very understandable that most home and property owners are fitting a radiant floor heating system under tile flooring. If you’re thinking about how you can fit heat under tile floor, then you’ve come to the right place. However, if you lack enough confidence to pull this off, then we’d advise you get in touch with a professional who can guarantee the best results for help. In this guide, we’d be considering how heating products are fitted under the most commonly heated flooring material which is tile. Let’s take a look!

1. Take a measurement of the room you wish to heat. When taking this measurement, you should leave out permanent fixtures such as tubs, toilets, floor vents and more. This information will be used to create a project sketch which includes the room dimensions
2. Test your electric floor heating rolls. To make sure that your floor heating rolls are in perfect working condition, you should use a digital ohmmeter to test it.
3. Inspect the subfloor. Clear the surface of any nails or other sharp objects which could cause damage to the heating element.
4. Install the flex roll. Simply roll out your flex roll till it gets to the opposite side of the room. Once done, you can then cut the mesh and turn 180 degrees to continue fitting in the other direction.
5. Place the sensor. If you happen to possess a floor heating thermostat that enables a floor sensor, ensure to position the sensor near the thermostat’s location and exactly between two cables, then use hot glue or weave into mesh to secure it.
6. Connect the thermostat. We’d advise you get in touch with a professional to have this done.
7. Install the tile.

While resin bound and resin bonded driveways have similar names, it might surprise you to know that they’re very different. Both paving systems use resin and aggregates (stones) to form a fixed surface, but there are plenty more differences than there are similarities.

Resin bound driveways are made from a resin and aggregate mix that is trowelled onto a bitmac or concrete base. It leaves a smooth, flat finish and you won’t find any loose gravel. It’s also a pourous surface, which means that rainwater can pass through into the ground, avoiding pools and flooding.

However, resin bonded driveways involve spreading resin across a base, then scattering aggregate into it. Most of the stones will stick to the resin, but some will stay loose. That means you’ll get the effect of loose gravel without so much to sweep and take care of. Because the stones are scattered onto a complete layer of resin, water can’t pass through it. That means you could end up with water pooling, and it also means that a resin bonded driveway isn’t frost resistant, meaning it could get slippery.

So which is better – a resin bound or resin bonded driveway? The answer depends on a few things. If you have a period property where a smooth, shiny surface might not complement the look of your home, you might want to go for resin bonded. If you need lots of grip, for example if you’re a wheelchair user, resin bonded may also be the way to go – even though resin bound surfaces still offer enough grip for sloped driveways and ramps. But if you want a low-maintenance, weed-free, permeable surface, resin bound driveways are the way to go.

How Long Does A Boiler Service Take?

Servicing of your boiler is a very crucial activity which does not only help in keeping your heating system in a top condition, but also assists in ensuring the safety of both you and your loved ones. If you carry out a regular boiler service you’ll be able to identify any possible fault your boiler may have on time before it leads to a more serious issue or even a boiler breakdown. As a result, you’ll be able to save yourself some time and money, but more importantly will save you from any dangerous risk that may result from gas leak in a boiler. The best time for a boiler service is in the summer when you’d probably would not really need the system, so you can take advantage of that as well as the possible lower boiler servicing cost during this period.

Before we look into the amount of time a boiler service should take, let’s first consider what should be done during a boiler service.

✓ Visual inspection. This is a check carried out by the heating engineer to ensure your boiler still meet the existing standards and requirements while also looking for any faults.

✓ Removal of boiler casing. There’s the need to ensure everything is working just fine and also to clean the boiler’s interior. These inspections should include the burner, heat exchanger, main injector and spark probe.

✓ Flue check. This involves making sure that there’s no form of obstructions in the flue terminals as also to ensure that the flue is well installed.

✓ Gas pressure check. This involves making sure that the boiler working with the appropriate pressure.

✓ Boiler fired up. This involves checking for any operating issues.

Generally, a boiler service should be completed within 30 minutes, however this time may vary largely depending on the brand and model.

Generally the process for having plans produced will only take a month or two. Major works or new builds can take upto ten months to produce. This will depend on the requirements of your project and the number of technical drawings you need produced. An architect will always advise you based on the project how long these will realistically take.

Are you interested in opening up the back of your home during the summer months? Or perhaps you’re just looking for a cool way to beautify your home and add more value to it. Patio doors offer you a great means to achieve your goals and even more so, with a plethora of styles you can choose from. So if you’ve decided to to install patio doors in your home, you’d probably also want to know exactly how much they cost so you can set a budget and start planning.

Generally, depending on the type of patio doors you wish to have installed, be it bifold, French or sliding doors, the price can vary within the range of £400 to £5,000.

There are a number of influencing factors that can play a huge role in the determination of the total cost of patio doors when looking to have them installed. These factors include: the type of patio door, choice of material, size of the door as well as double or triple gazing.

Based on the type of patio door, the cost of various patio door styles are given below:

• Bifold Patio Doors

The cost of bifold doors is usually affected by the material as well as number of panels to be used. The potential cost is usually within the range of £1,200 to £3,000 upwards.

• French Patio Doors

French patio doors when installed with aluminium frames are often very expensive. They’re mostly used with uPVC at the new build homes’ rear in the UK. The potential cost is usually within the range of £800 to £3,000.

• Sliding Patio Doors

These are usually made from aluminium, wood or uPVC. With wood being mostly used for internal doors. The potential cost is usually within the range of £700 to £3,000.

If you’re planning on adding a house extension to your property, you’d probably be worried about whether or not your proposed extension would require a planing permission. Well, it may be relieving to know that not every house extension project would require a formal consent, and in fact, several extensions are covered by the permitted development rights. Not only can this save you a considerable amount of time especially at the project’s planning phase, but it’ll also save you money on the application fee. In the UK, single storey extensions to the house’s rear can be 3 metres deep for both semi detached houses and terraces or 8 metres deep for detached homes.

So how do you know when you’d require a planning permission for your home extension? Well, if your extension plan fits these criteria explained below, then your project is most likely going to be allowable as a permitted development.

• Extensions, which includes previous additions, must not go beyond half of the original house’s total surrounding land area.

• The main elevation, or side elevation where it fronts the highway, must not be extended forward.

• For single storeys, the rear additions must not extend more than the original house’s rear by more than 3 metres in both semi attached homes and terraces (4 metres for detached houses).

• Extensions to the side must be a single storey with a height not exceeding 4 metres and not going beyond 50% of the original house’s width.

• Extensions hat within 2 metres of a boundary should have a eaves height not more than 3 metres.

• Multi storey addition must not extend beyond the original house’s rear wall by a maximum of 3 metres or 7 metres of the boundary opposite the rear wall.

• Permitted development rights do not apply in listed buildings or designated areas.

How To Tile A Bathroom Wall With Large Tiles

It is crucial to make the walls of your bathroom waterproof, and a great way to do this is by installing tiles on them. And to make it more effective, less time consuming and a lot easier, you can make use of the large tiles in your shower. So how do you have them installed? With this brief guide, you’ll learn everything you need to know about the bathroom wall large tiles installation. Let’s have a look!

lGet The Appropriate Substrate

• Clean the surface on which the large tiles will be placed

• Make use of levelling spacers to ensure the large wall tiles are even.

• Get a cement-made backer board to install the tiles

• You made require a large format wall adhesive for the installation, if the large wall tiles are different

lSet The Layout

• You may need a dry layout for the tiles installation (installation without mortar or other bonding agents).

• Start with the first wall opposite the bathroom’s entrance

• Once completed, you can continue with the remaining parts of the bathroom wall.

• Place the first tile at the centre.

• Place the subsequent tiles on each side of the previous ones to have a more balanced installation.

There are three varying materials that can be utilized in installing heavy wall tiles. These includes thin set mortar, epoxy and mastic. However, you should always make use of epoxy for large format tile layout. To do this, simply place the tiles at your desired angle and gently twist them to hold firmly in place. Continue with this process till you have successfully covered the entire bathroom wall with the large tiles. Once done, leave the bathroom wall to dry.

It is advised that you hire the professional services of a tile installation company in order to get the best outcome especially if you lack the necessary experience, tools and knowledge to carry out the project. This will save you some time, effort and money.

Slab paving is a great material to use to create a sturdy shed base.

Start by measuring out the area where your shed is going to be. This needs to be the size of your shed, plus about 10-20cm extra each way. Mark it out with string and pegs, make sure it’s square, and dig it down to about 6cm deep.

Then create a sand and cement mixture and put a layer down, followed by your paving slabs. Make sure you start in one corner and use a rubber mallet and spirit level to make sure they’re as level as possible. Leave this to set and you’re ready to use your shed base.