Find a Shop Fitter you can trust in Islington.

Are you thinking about installing a solar thermal system in your home? If yes, the you’d most likely be wondering the exact amount the system is going to cost. Well, you’re not alone. This is one of the most common question when it comes to solar thermal systems and we aim to answer that in this article. So let’s get started!

Unfortunately, the cost of a solar thermal system can’t be given in a single, accurate answer as they vary widely. However, when getting a new solar thermal system, you can expect to pay a sum within the range of £3000 to £6000 ( this includes a lowered VAT rate of 5 percent). The figures provided takes into account the installation costs as well as all the parts ( such as control panel, solar collectors, hot water tank and pipes).

To determine the price of your system, the quality and type of the panels matter. For instance, according to the Solar Trade Association, a properly insulated twin coil cylinder system would be priced at around £4500. in the same tone, it’s also possible to get DIY solar thermal kits that includes all the required hardware which will cost within the range of £1500 to £250. This however, may not be eligible for government support. In order to benefit from the RHI, your system must be fitted by a MCS accredited installer.

The varying prices of the solar thermal system’s initial cost is based on the specification of each individual house. For example, in situations where the building is having complicated water system, the plumbing cost is expected to increase which will have a serious impact on the overall cost of the solar thermal power system.

Many domestic biomass boilers are no bigger than a standard gas boiler. However, they do require a flue, a feeder and a space to store the fuel. These can be designed to suit many different properties and will fit in lots of homes or a garage or outbuilding.

Are you currently considering installing a ground source heat pump in your home? Well, a heat pump can be a great alternative when compared to gas or oil boiler, however, you may also be worried about the operating efficiency of this heating system if you live in a cold climate or during the winter months. However, in reality, there’s nothing to be worried about!

A ground source heat pump works by incorporating the natural heat that’s typically found in the ground or groundwater. In other words, this type of heat pump doesn’t make use of fossil fuels to heat your home while it can also minimize carbon emissions that may pose a huge risk to the environment. This makes a popular option especially amongst home and property owners who are very environment conscious and prefers to utilize more renewable sources of energy.

However in a place such as the UK where the temperature can drop to around -10℃ during the winter months, it may get you thinking whether there’ll be enough heat in the ground to warm up your home. Let’s have a look.

In the UK, the temperature of the ground doesn’t normally fall less than 10℃. This is still enough heat for the ground source heat pump to warm up your home. In other words, as long as you purchase the right one, your ground source heat pump will continue to work just fine during the cold months. Due to the fact that every heat pump varies, you will need the right equipments so as to ensure the heat pump works well throughout the winter. This is usually not an issue in the UK, but same can not be said of colder places like Canada and North America.

How To Hire A Handyman

With so many individuals having not-so-good experiences with handymen, hiring one can be a very difficult task. If you’re also looking for the best way to hire a handyman, then you’d have probably heard some stories of them not showing up, not returning calls or delivering an awful service after promising heaven and earth.

However, the reality is there are also a number of people who have enjoyed the several handy skills these “small job guys have got. Some who actually return calls, show up and also come true of their promises. So how do you become one of those people that’ll have a great story to tell about these handymen? Well, in this article, you’d probably learn a thing or two on the best approach to hiring a handyman that’ll not only provide you with a high quality service, but also display an all-round professionalism and excellent customer service.

• Be Organized. Make a list of all repair and maintenance services required and establish a budget for them. You can use free online pricing tools like Home Advisor’s True Cost Guide to learn more about repair costs.

• Prioritize Your Tasks. Your repair list should be made in order of priority.

• Compare Your Prices. Ensure that your handyman is familiar with the repairs and compare the prices. The handyman’s price quotes can be a little bit higher, but more attention should be placed on obviously inconsistent pricing.

• Search For References. It’s important to request references of previous work. If the handyman has low quality work samples or negative references, then you might want to steer clear and find another handyman.

• Discuss Payment. If you have multiple projects to be done, it’s advisable to structure your payments around task completions. Do not even consider hiring a handyman who requests a full upfront payment.

While many professionals will recommend a pressure washer to clean block paving, it’s possible to clean your paving without one – just scrub the affected areas with a firm bristled brush and use plenty of soap. Then, rinse off the area with clean water.

A composite door is a valuable investment any homeowner would be glad to make due to its numerous benefits. Not only are they super energy efficient and good looking, but also exceptional when it comes to keeping your house warm and guaranteeing your safety and maximum security. They come in wide range of styles, colours as well as personalization options, which makes them one of the most popular and strongest door you can find in the market today. However, the question that hangs over the mind of many potential investors is how fade resistant are composite doors? Would the visual appeal remain intact for a long period of time or fade away after a few years of exposure to intense sun?

The last thing any homeower would want to see is a priced asset looking dull and tired only after a couple of years after installation. Owners of timber doors worry about having to re paint every couple of years. UPVC door owners worry that their doors can, at times, start to fade when exposed to a strong and intense sunlight. So what exactly do composite door owners worry about? The simple answer is absolutely nothing! Proud composite door owners only have to do a quick wash with a warm soapy water as upkeep for their long lasting and durable asset. This is because composite doors are typically made from Glass Reinforced Plastic outer skin which makes them highly resistant to the element. So whether it’s raining heavily or the sun is shining intensely, the colours of your beloved composite door will not fade and will remain exactly the same way it was when purchased. No matter what the UK weather throws at them, the reinforced plastic skin and robust core ensures the door remains water tight and in top condition always.

Surprisingly, bathroom renovations usually involves a wide range of trades to complete. And to make sure the work is done to a standard accepted by building regulations, some of these trades is required to have some particular legal qualifications. Therefore, if you’re interested in getting a new bathroom project done, you’ll probably need to call in more than just your plumber.

Below are the different trades you may need to successfully install a new bathroom:

✓ Plumber - The plumber’s task would be to install the new bathroom’s pipework and reposition and fit the bathroom items as needed.

✓ Tiler - To remove old tiles ( if any), prepare and tile the walls and/or floor.

✓ Labourer - To detach the old suite, strip out old tiles as well as floor covering etc.

✓ Plasterer - To skim the ceiling or board out the walls before you tile or plaster.

✓ Joiner - To re-hinge doors or construct studwork. For instance, when including a new bathroom to a bedroom.

✓ Painter - To paint the newly skimmed ceiling with the help of anti mould bathroom.

✓ Electrician - To install underfloor heating, ceiling spotlights, an extractor fan or a shaver point.

✓ A builder - A general builder will be required if your new bathroom project requires any structural work to be carried out such as installing a new uPVC window, putting in an RSJ and lots more.

✓ A decorate - As the name suggests, the decorator can come in to make the bathroom look a lot more attractive and to finish the job.

And above all, to ensure proper coordination and success of the project, you’ll also need a person who’ll serve as the lynchpin in charge of the entire project.

Are you preparing for an international move? We all know relocating abroad comes with its unique set of challenges as well as tasks - from applying for visas to learning new languages and everything in between. Fortunately, this post has been created in order to help you check out one of the most important to dos that’s probably on your list - determining how to move your personal belongings to a new country. Here, the first thing you should know while moving household items outside the borders is that it’s usually a bit more tricky than moving them within the United Kingdom, but it can still be achieved with proper planning. Below is an overview of the best ways you can put into consideration to move your personal belongings abroad.

• Moving by sea freight. This is the most common and cost efficient means to transport household items to another country. In order to achieve this, an international moving company will send a container to your home to be loaded with the household items. Once done, a truck will pick it up and carry it to the port. Generally, most international moving companies offer door to door and door to port service, in which an agent helps manage the move to make sure that your container is forwarded to the right carrier as well as seeing to it that all customs clearance documents are duly completed and submitted.
• Moving by air freight. This is less common and more expensive way to move household belongings to a new country. Although an airplane can only carry so much cargo, but many holds the belief that the convenience it offers is well worth the hefty price tag as well as space limitation. Therefore, if you wish to receive your personal belongings as soon as possible, going for this option would be your best bet.