Find a Shop Fitter you can trust in Fochabers.

While it sounds like it could be difficult to plasterboard around a Velux window, it needn’t be. As long as you have the right tools and materials, you should be able to plasterboard around your roof window easily and make good ready to be skimmed. When you or a tradesperson has fitted your Velux window into your roof, you’ll probably need to plasterboard over it to create a good ceiling. To do this, you’ll need:

• Plasterboard sheets – make sure you measure your room so you know how much you’ll need
• Screws to secure the board in place
• Drill
• Hammer
• Straight edge and pen knife to score the board before trimming
• Fine toothed saw the cut the plasterboard

When you’re ready to plasterboard around your roof window, make sure you’ve cleared enough space to work in. Then you can begin by cutting your plasterboard to size using your straight edge and pen knife to score, then your saw to get a clean cut. A common way of plasterboarding around your Velux window is to use the groove on the window frame to hold one edge of the board, then screw the other edge to the battens on the ceiling. People often use drywall screws these days as they have a better grip of the plasterboard as they drive through. You’ll need to use a drill to screw these in. However, you could use plasterboard nails, which are galvanised to stop rusting. When you’ve done this, you can then skim the walls or ask a plasterer to do it for you. Plastering, while it looks easy, is a tricky skill so it’s always best to ask a professional to do it.

Most material warranties come from the waterproofing layer manufacturers, and can last between 5 and 20 years. If your roofing contractor is on the manufacturer’s installer list, it might cover their work. It’s important that you always read through all the information given to you about your warranty so you know exactly what is included.

Typically, loft conversions do not require planning permission except in certain situations. They’re usually covered under what’s known as Permitted Development. Certain building works like loft conversion, rear extension and conservatories are granted planning permission by local authorities. Permitted Development, however, gives you a free range to improve your home without having any issues from the councils or regulations. Before your planned loft conversion can be covered under Permitted Development, there are some certain criteria that must be met. This criteria includes the following:

✓ The extension must not go beyond the existing slope of the roof at the front of the house.

✓ The loft space converted must not go beyond 40 cubic metres in a terraced house.

✓ The roof’s height must not be increased by the extension.

✓ The loft space converted must not reach beyond 50 cubic metres in a detached or semi detached house.

✓ The plan for the extension mustn’t involve structures like balconies, verandas or anything other structures of this nature.

✓ The roof extension should be positioned as far back as possible or at least 20cm from the existing eaves.

✓ The side that faces the window openings should be at least 1.7m beyond the floor and the windows should also be obscured.

✓ The roof extension must not overhang the existing roof or wall of the house.

✓ The materials that are to be used must be similar or the same to the materials that has already been used on the house’s exterior.

However, you should bear in mind that there are some properties that are exempt from Permitted Development. Examples of these type of properties include conservation areas, Areas Of Outstanding Natural Beauty and World Heritage sites. Permitted Development does not also provide coverage for listed buildings.

After being in the shadows of conservatories for so long, Orangeries are now pulling a great comeback into the scenes. They were quite popular back in the 17th and 18th century, but went into the drawers with the advent of conservatories. In recent times, Orangeries are now becoming more and more popular with several homeowners now looking to have one constructed in their homes.

Like many other home improvements or extensions, orangery prices can vary based on a number of factors. However, you can expect to incur within the range of £15,000 to £20,000 for a basic orangery design and build. If you wish to build orangeries with more distinctive features, this price can jump up to £50,000 or more depending on your preferences. Generally, orangeries are more likely to be a bit cheaper when compared to their conventional extension counterparts and add more value to your home than a conservatory in terms of a resale.

For the best results, it’s advisable to investing good money to ensure a solid build and save money in the fittings. Do not look to cut costs by going for cheaper building materials like poor quality vines. Generally, interior design will always depreciate in value, but its the solid structure that command great value for resale purposes. Also, when the structure is solid and of a great quality, you’ll get to save a lot of repair money down the line as the cheaper frames will always give way with time. However, if you have the money, you can also consider spending huge bucks on both the structure as well as the fittings because its only through this you truly maximize the benefits from your orangery. When the fittings are of great quality, repairs won’t come often which ultimately saves you some money as well.

There are several reasons why you may wish to plant a garden. To have a healthier environment, eat healthier, cook with fresh produce and lots more. Regardless of your purpose, one challenge faced by several home and property owners is exactly how to go about this and where to get started. If you’re having the same issues, then you’ve come to the right place. In this post, we’re going to take you through the process involved in planting a garden to ensure your project turns out a success. If you lack the confidence required to pull this off, we’d highly recommend you call in a professional who can guarantee the best results.

1. Start small. Being overly ambitious when planting a garden could be easiest way to a disastrous outcome. Give yourself a realistic goal and learn to plant healthy and productive plants by starting small.
2. Identify your site. To ensure a great garden, the plants need lots of sunlight. So, you can go for a space that gets about 6 to 8 hours of sunlight on a daily basis. Also, make sure that there’s a water source nearby to make it easy to give your plants water as required.
3. Choose you garden type. Decide how your garden will grow, be it in raised beds, in ground, in containers or a combination of styles. This will ensure that your garden is neat and orderly while also enhancing its curb appeal.
4. Make a list. Create a list of the plants you’d love to have in your garden.
5. Plan your planting. This involves spacing your plants as they’re going to grow bigger, deciding which plant goes where and identifying the best soil to grow them.
6. Get your plants.
7. Plant them.

If you want to install an external wall, it is only wise to consider whether or not a planning permission is required in order to avoid a hefty fine. In a great kudos to the government and a welcome relief to home and property owners, the installation of external wall insulation is seen as an “improvement to the house and not an “extension or an “enlargement. Ultimately, this implies that external wall insulation fitting is to be done under permitted development and a planning application may not be required. However, like many other regulations, there are also exceptions to this rule and the main one is if the activity changes the appearance of your property. Properties such as a listed building having tighter regulations may pose some issues. As a result, we’d advise you to consult your local authority to ensure that there’s no fast rule to this topic before commencement of the external wall insulation project.

At the moment, according to the Government Building Regulations, the surface of the entire wall is to be improved to existing standards if the area to be insulated exceeds 25 percent of the wall. In normal situations this is usually the typical case, however to prevent avoidable fines and other possible punishments, it is always best to reach to your local authority and check out the rules guiding external wall insulation in your constituency. Furthermore, since external wall insulation is not a task that’s recommended to be done by yourself, you can also ask the professional external wall insulation fitting company for the applying rules before proceeding. As a good professional, the company should have a better knowledge of the rules and regulation guiding its activities.

Gravel, asphalt, concrete and paving can all be permeable. However, some types of asphalt and concrete are impermeable. This is why it’s important to be precise about what material you want for your driveway. If you want a permeable driveway, you should also make sure that your sub-base is also permeable.

As the name suggests, composite doors are made up of multiple components or materials which includes uPVC and foam or solid timber core, just to mention a few. Individual materials incorporated manufacturing a composite door plays their own important role with unique properties which are perfectly blended to give the strongest and most durable door materials currently available in the market. These materials are pressed and glued together as they’re subjected to high pressure conditions.

The need to counteract the weaknesses found in most single material doors, ultimately gave birth to the development of composite doors - which puts together several materials with specific properties to cancel out each others’ excesses or weaknesses. Purchasing a composite door means a valuable investment in a sturdy door frame manufactured using the toughest and most robust materials. In other words, you’re increasing the security of your home, enjoying the weatherproofing qualities of the door and also giving you a peace of mind knowing both your loved ones and properties are safe, well protected and secured. Apart from the materials used in making the door, you’re also provided with an array of choices when it comes to the personalization of the door to your needs and taste. You can choose from a variety of colours, woodgrain effects, textures as well as finishes.

Overall, composite doors also requires little maintenance and are very durable. Due to the modern techniques used in manufacturing a composite door, the colour as well as beauty is guaranteed to last a very long time. What’s more? Generally, the composite is weather and fade resistant so you won’t have to worry about spending either time or money for the care or maintenance of your door even after frequent or heavy usage.