Find a Shop Fitter you can trust in Diss.

Solar thermal panels work by capturing heat directly from the sun and using it to heat water. This hot water is then passed through a coil to heat the water for your central heating system. Solar thermal systems are compatible with many existing conventional boilers with hot water tanks, and can be set up to feed in to your existing heating system.

Cockroaches, bedbugs, fleas, mice, rats, mosquitoes, spiders, squirrels and moths are just a few of the long list of pests that home and property owners have to battle with on a regular basis. Failure to hire the services of a professional pest control will not only heighten your worries about your property potentially getting damaged, but you may also be faced with serious health issues if care is not taken.

We all know these pests are everywhere, they’re scavengers digging through ash cans, dirt and even sewage lines to find food. And as a result, they are able to carry and transfer different disease-causing allergens as well as bacteria. If you live or work in a building that’s infested with pests then you’re automatically predisposed to facing various health issues. These could come in form of skin rashes, allergies, respiratory problems and more. With all these aforementioned terrific impact of pest infestation, the importance of getting a professional pest control simply cannot be overemphasized.

If you wish to hire a pest control professional, then you may also be worried about the price. Well, generally, pest control prices offered will largely vary based on a plethora of factors. These factors include where you reside, the kind of pest you want to remove, the scale of one’s infestation, the number of visits you require, the pest control company you hire as well as how large your home is. Generally, if you’re dealing with spider infestation in a four bedroom house, you can expect to pay within the range of £200 to £230 to have the spiders controlled. Meanwhile the price for the control of cockroach in the same house will cost within the range of £230 to £260. Overall, you can expect to pay within the range of £80 to £350 depending on the factors earlier stated.

Fibreglass, or GRP, flat roofs are very durable and should last you years, but over time they can become brittle and you might see some cracks or holes forming. Luckily, you can repair a fibreglass flat roof and it doesn’t have to be too difficult. Cracks in a fibreglass flat roof If you notice long cracks in your fibreglass roof, you can often use a fibreglass crack sealant. Simply clean the area, squeeze the sealant into the crack, then smooth it off. If you want it to look neater, you could coat the entire roof with a restorative coating which will make it look new again. Hole in a fibreglass roof If you notice a hole in your fibreglass flat roof, you’ll want to get this repaired as soon as possible to avoid any rainwater getting into your home. There are lots of fibreglass roof hole repair kits on the market, both online and in DIY stores, so you shouldn’t have trouble picking one up. They usually contain a mouldable UV cured patch that you can stick onto the hole. It will harden and become instantly weatherproof, so is the perfect emergency repair solution. Fixing pin holes in a fibreglass flat roof Unfortunately, if you find pin holes in a fibreglass flat roof it’s often because the installer didn’t use enough resin during the fibreglassing process. Luckily, if you can’t get back in touch with the installer or you only notice after a few years, you can fix this yourself. Sand down the roof back to the clear resin layer. Clean the entire roof with acetone and reapply some GRP roofing resin. Ensure that all the pinholes are filled – you might need two coats.

The best type of insulation for your property will depend on the type of walls and any insulation that’s already present. It’s usually a good idea to have some form of wall insulation as well as loft insulation, as this helps to prevent heat loss in both areas.

Once you’ve chosen the perfect feature to suit the shape and style of your bathroom, it’s time to start putting it to good use. Read on for a step-by-step guide on how to install a bath, but first of all, below are the preparatory tools;

Preparation

Before you install a bath, there are some things that needs to be taken into considerations.Once you have decided where you are going to install your bath, use an electronic detector to make sure there are no hidden pipes or wires in the walls where you will be securing the fittings. It is also advisable to choose walls that have a stud so that you can attach your fittings so strongly.

When assembling your bath, lay it on top of a rug or blanket to ensure it doesn’t get scratched, and remove any protective film from the areas you will be working on, such as around the drain and tap fittings, as well as the sides where the bath will sit against the wall. Always turn off the water at the mains beforehand.

Note: The installation process will vary, depending on the design of your bath. It is always necessary to consult the manufacturer instructions alongside this guide.

MATERIALS

• Drill and appropriate drill bit
• Screwdriver
• Spirit level
• Tape measurer
• Hammer
• Pencil
• Caulking gun and silicone sealant

You’ll also need an extra pair of hands to help manoeuvre the bath into place.

Step 1

Attach the legs and the fittings by securing the appropriate bolts and channels, and then attach the feet.

Step 2

Measure and adjust the bath's position, Once you are sure that your bath is level, mark the places where it will be secured into the walls and floor. If your bath comes with wall fittings, use your pencil to mark the place where they will be secured to the walls. Do the same for the floor fittings.

Step 3

Prepare the wall for the fittings, align it with the wall at the location you marked and use your spirit level to make sure it is even. Drill holes and secure in place, making sure you use fittings that are suitable for the type of walls in your bathroom.

Step 4

Secure your bath by moving the bath back into the final position and align it with the holes you created, or on top of the timber batten. Once again, check that it is level. Turn the water back on and check for any leaks.

Step 5

Seal around the rim, fill it with water and trace silicone sealant around the edges, where the rim meets the wall. Allow it to dry for the recommended time.

Most Sun Tunnel Kits are available in sizes from 250mm Diameter to 550mm Diameter. This gives you a good range to choose from depending on the size of the room you are trying to brighten.

• 250mm Sun Tube – Perfect for room sizes up to 10m2. (Hallways, Small Bathrooms)
• 350 – 450mm Sun Tubes – Perfect for rooms 10 to 15m2. Larger Hallways, Stairwells and Bathrooms.
• 550mm Sun Tube – Ideal for rooms 15 – 22m2. Kitchens, Bedrooms, Living Rooms.

Intruder alarm systems work in various ways and all with one goal in mind - ensuring the safety of both the building and valuables. Whether it’s a small or big home or property, there is a wide range of systems that can be installed to guarantee adequate protection from unwanted visitors. They work with various applications and you get to determine the action to be made in the event whereby the protected zone is violated and system triggered.

Intruder Alarm Systems come in three main types which includes:

• The Bells-Only Intruder Alarm System - Whenever there is a violation, the only action would be to trigger the alarm, nothing more.

• The Communicators - These alarm systems are basically speech dialers which automatically sends a message to various selected number whenever there is an intrusion.

• Monitored Systems - Here, the monitoring centre would be alerted once there is a breach in security.

However, irrespective of the type, most intruder alarm systems operate following a similar series of steps.

lSensing of motion. The systems usually feature door and window sensors which detects any contact of the door/window in the frame when shut. There are also the motion sensors which can be strategically stationed across the property to detect any motion and possible breach of security.

lTriggering of the control panel. The system is interconnected, and all components are linked to a control panel where all detectors’ and sensors’ generated informations are relayed. The alarm countdown is activated in the event whereby a contact is made and circuit impacted.

lSounding of the alarm - Once the alarm countdown has been initiated, failure to insert an abort code will ultimately sound the alarm. The external sounder that comes with the system produces a loud sound to notify people about the security breach or intrusion. There is also an interior sounder which works to bring the presence of an intruder to the awareness of the occupants.

lDeactivating the alarm. With the control panel, users can easily activate/deactivate the alarm system via a fob, code or selected smartphone apps. Click on the link to learn more about intruder alarm systems - https://alarm.quotatis.co.uk/3-ways-home-security-systems-keep-safe/