Find a Shop Fitter you can trust in Downham Market.

If you’ve made the decision to purchase an air conditioning system for your office, the next step is deciding whether to install the unit yourself or get in touch with a professional for help. To several business owners, this is a very simply decision to make, - a lot of money can be saved by making the task a DIY project. However, the installation of a heating and cooling system requires some specific skills and knowledge that, when not properly mastered, can lead to some installation faults which will ultimately make the system consume more energy than necessary while also affecting its durability. On the other hand, installation done by a well trained professional will not only save you a lot of money, but will also ensure you get to enjoy your system for a long period of time.

If you’re yet to be convinced about the importance of a professionally installed office air conditioning system, here are some point that just might make you have a rethink.

• Professionals are experienced and highly skilled. When it comes to the installation of heating and cooling systems in a work environment, there’s a need to call in a reliable professional. This is because AC system installation requires a well trained individual who know just how best to ensure your AC system works efficiently and for a long period of time.
• Most professionals are insured. When you call in an insured office air conditioning expert, you’ll have a peace of mind knowing you’re fully covered in case something goes wrong during the installation process.
• Professionals able to provide expert advice. Having a good experience in field and good knowledge of heating and cooling systems, professionals are able to provide helpful tips such as maintenance procedures so as to ensure you get to enjoy your investment for a prolonged period.

How To Clean A Roof?

If you’re planning to clean your roof, but don’t know where to start, you’ve come to the right place! There are different types of roofs available in the market today and the method used in cleaning one can be largely different from the other. As a result, we’re only going to look at one of the common types of roofs you’ll find in the UK - the Asphalt shingle roof tiles. This roof type is very common and for a good reason. Not only are they visually appealing but they’re also hugely versatile by design which enables them to be adaptable to varying shapes, angles as well as forms depending on your preference or needs. With all the benefits that can be derived from asphalt shingle, they however, need to be properly maintained to help retain their good looks.

To clean your asphalt shingles, you’ll most likely require some type of chemicals especially when dealing with algae stains and some other visual problems. Therefore, make sure you purchase a product marked safe to be used on this type of roof and not those only proven to remove moss and algae stains. Mix the chemical cleaner with a gallon of water and a quart of bleach or as instructed by the manufacturer. Pour the mixture inside a pump-style garden sprayer and mix thoroughly. When done, climb up on the roof and spray as good as you can. Upon completion of spraying the roof with the mixture, then allow to work its magic for some time - about 15 minutes or thereabout should be good.

After that, you can make use of a garden hose to spray down the roof and wash down the mixture entirely. If some stains remain, use a brush to gently wipe the tiles individually.

The task of installing a tile roof can be quite a difficult one. Such a project takes a great deal of preparation, well before the actual tile installation is done. It does not matter if you are putting new ones or replacing your old tiles, understanding the proper technique and steps become crucial.

Remove old roofing (if applicable).

This is, on its own, a major job that can take days and require special tools. It takes some time, but be prepared to do it right.

Install battens (if applicable).

Battens may be needed to hold the tiles in place if the roof is having a steep slope. Usually made of metal or wood, battens are generally 1 inch thick and run horizontally along the roof.

You can find several varieties of tiles that has a hook or a lip allowing it to hang on the available battens. Apart from this, you can find several clips in the market which help to attach the tiles on to the batten.

Determining the spacing for battens can be done easily using two tiles. To prevent interlocking, a three inch overlap is required at the minimum, and a smaller amount of overhang should be left over the eaves. Keep this in mind when you determine the locations of the battens.

After you have determined the distance between the first two battens, measure the distance and set battens using that spacing up, making sure to double-check measurements as you go along.

• Install the tiles.

• You will need to begin with one side first, and then continue to move along the length of the roof.

• Cut tiles to fit tight spots.

• Tiles have to be cut precisely to overcome any obstacle like the chimney.

• Install the ridge tiles.

After completing the broad surfaces of the roof, special ridge tiles are required to cap the top.

Periodic testing and inspections should be completed: Every 10 years for your home, Every five years for rented accommodation, Every three years for a caravan, Every year for a swimming pool.Electrical inspections are also carried out when buying, selling or renting a property.

• Decking joists
• Coach screws
• Coach bolts
• Combi drill
• Socket set
• A saw suitable for your project and the thickness of the timber
• Pencil
• Decking preservative
• Sandpaper or sander

1. Measure your deck frame and cut to size if necessary.
2. Make 2 pencil marks on each end of the frame’s 2 outer joists to mark where the coach screws will go. They need to align with the centre of the adjoining outer joist. Then, use a flat wood drill bit to drill recesses into each mark. Make them the same depth of the screws that your using’s head and wide enough for a ratchet or socket to tighten them.
3. Using a thinner drill bit, line up the outer joists and drill a pilot hole through the middle of the recess. These pilot holes act as a guide for the screws and stops them from splitting the wood.
4. Fit the coach screws with either a drill driver or socket and ratchet.
5. Repeat the process for the inner joists once you’ve assembled the outer frame.

First and foremost, it must be stated that replacing an existing electric shower is much easier than fitting one from new. This is primarily due to the fact that the main components required which includes the water pipes as well as electrical connections will have already been established. In this post, we’re going to assume that all these are already in place which means you’re replacing an existing electric shower with a new one. It’ll also be an advantage if the preferred electric shower features cable and pipe entry points at the top and bottom as well as the rear and side so as to allow for more flexibility when it gets to routing cables and pipes. If you’re not confident enough to pull off this task, then it’s strong advisable to call in a professional who can guarantee the best results the first time. Here are the steps you can follow to fit your electric shower:

• Disconnect the power supply as you probably know water and electricity aren’t particularly the best of friends. Once done, you’ll also need to turn off the water supply
• Remove the shower unit. Many shower units are secured with four screws which makes the removal rather straightforward.
• Examine the shower connection points to determine if they’re in the same place on the new unit as they were on the old one.
• Install the new shower unit. First, you’ll have to mark the position of the new units on the wall using a pencil. If the new units don’t possess the same silhouette as the old one, you’ll have to drill new ones preferably using a masonry drill bit.
• Check your installation at both the electrical and water supply to ensure the connection is made correctly.
• Test your new electric shower by turning the power and water supplies back on.

In order to get a good idea for how much is needed, there’s a need to measure a room for carpet. This is an essential step that should be completed before you shop for brand new carpets to install. Taking the measurement for a basic square or an oblong area is actually relatively easy as long as you put the doorways and entry stairs into consideration. If you’re looking for the best way to measure for carpet, then you’ve come to the right place. In this post, we’re going to take you through room measurement for carpet procedures.

To get started, you’re going to need a measuring tape or a laser distance measurer, a paper and writing instrument or note taking app, a calculator or calculator app as well as a graph paper and a pencil if you wish to draw your layout.

1. Draw a simple diagram of your home. This doesn’t have to be perfect, but you’d have to ensure the measurements taken are accurate. All that’s needed is a basic drawing featuring all the rooms shown. What’s more? If the room happens to be square or rectangular, you can calculate the area simply by multiplying the width by the length.
2. Chimneys and recesses. If the room in question features chimneys breasts and recesses, take a measurement of the entire space and ignore them, the flooring or carpet will simply be cut around them.
3. Calculating the final figure. Take a measurement of each area and put it down in the relevant space on the diagram. Then, simply break the room down to smaller rectangular shapes, determine their area and add them together to obtain the total area of your room. You can make an allowance of up to 5 percent of the total for possible waste.

How Much Are Bifold Doors?

Are you considering installing bifold doors for your home or property? If yes, then you’d probably want to know how much it would cost so you can prepare a budget and start planning. The cost of bifold doors, however, is dependent on a wide array of factors which includes the number of panels, size of the bifold doors, internal or external installation, material used in making the bifold doors, type of the glass as well as upgrading the locking mechanisms.

Of all these factors, the most significant influences are both the material and the number of panels to be used. For bifold doors with 3 panels, the potential cost will range from £1,200 to £2,500 depending on the materials used, be it aluminium, timber or uPVC. For a 4 panel bifold door, the price will range between £1,400 to £2,800 depending on the either of the three aforementioned materials. And finally, for a 5 panel bifold door, the cost will be between £2,500 to £5,500, also depending on the three materials.

When calculating the cost of bifold doors, it’s also important to factor in the cost of installation as the task requires specialized skills and tools, therefore it’s not advisable to be made a DIY project. The cost of installing a bifold door will also be influenced by multiple factors such as the bifold door material, the number of panels, your location in the UK, the installer of your choice as well as whether or not there’s an existing opening that’s suitable for bifold doors. The price will ultimately boil down to the installer you hire, so it’s advisable to contact multiple professionals and compare their services and quotes. For the easiest installation where there’s an existing opening in the wall, the price will range between £150 to £500. However, for more complicated installations, the price could be above £500.