Find a Shop Fitter you can trust in North Yorkshire.

Air source heat pumps work by absorbing heat from the outside air and transferring it inside to heat up your property.

An air source heat pump has an outdoor unit containing a refrigerant. This absorbs heat from the air and passes into a compressor, where the temperature is increased. The heat then transfers either into water, which feeds into your wet heating system, or into air, which is dispersed around your property.

Air source heat pumps need electricity to run, but this is to power the compressor rather than directly generate heat.

If you’re thinking about installing a solar thermal system in your house, it’s always important to put into consideration numerous factors before you proceed. While some solar thermal systems are suitable for use at home, there are also some that are suitable for businesses or organizations which normally requires a big amount of hot water like hotels, restaurants, schools, hospitals and many more. You’ll also find some types available in the market that are suitable for communities to satisfy communal hot water demands.

It should, however, be noted that solar thermal systems do not have the capacity to produce all the hot water demand of a house. In the UK, an average household will need an annual water heating of between 3000kWh to 5000kWh. Whereas, a solar thermal system is only able to meet about 40 percent to 60 percent of this demand.

With that in mind, it’s also worth noting that during the summer months when the solar radiation is at its peak and hot water demand is relatively lower when compared to other seasons, a solar thermal system may be able to provide all of your household’s hot water needs. This implies that during this period you may not find the need to operate your boiler at all. However, during winter or colder months, when you have a higher hot water demands in contrary to a lower solar radiation, a solar thermal system will only be able to take care of about 20 percent of your household’s hot water needs. And that ultimately implies that during this period, you’ll need to rely more on a alternative or backup source of heat like gas, coal, electricity, oil or LPG.

Wet rot simply refers to the decay of timber caused by high moisture levels. This natural decay occurs when the moisture content in timber is about 30 percent to 50 percent. This is opposing to dry rot which only occurs as a result of a lower moisture content of about 20 percent. Naturally, a fungus is attracted to very damp wood, which it feeds off and in turn, destroying it. There are a number of fungus types, however the most common type is Coniophora puteana (also referred to as cellar fungus). In general, wet rot is usually confined to a localised damp area and does not spread which makes it a lot less destructive when compared to dry rot. However, if left untreated or totally ignored, wet rot can be just as destructive as dry rot and can greatly reduce the structural strength of the timber thereby causing a major structural damage in the process. So, what causes wet rot? Let’s take a look!

First and foremost, it must be stated that wet rot would be non-existent without a damp area to grow and thrive as wet spores are attracted to wet timber with a high level of moisture content. This moisture can be as a result of a number of issues which includes defective plumbing, leaking gutters, leaking roof, broken pipes, leaking washing machine or a leaking shower tray or bath. When the moisture a timber is exposed to is excessive, this offer the perfect environment for the growth of wet rot as it enables fungal spores to germinate and grow. They use the wet timber as a food source and eat it away, leading to a weakened wood and a compromised structural integrity.

A bedroom is meant to be a quiet zone and personal getaway from the chaos of the outside world. However, there are times when the noise coming from the outside would just be too unbearable to put up with. You can’t always control the noise that surrounds your bedroom and even more so when it comes from the neighbours’ house or the streets. The best solution here would be to mitigate this with some simple soundproofing solutions. These are tricks can you can do by yourself, however if you’re not confident enough to pull this off, then it’s advisable to get in touch with a seasoned professional for help. In this guide, we’re going to walk you through the bedroom soundproofing techniques. Let’s take a look!

• Cover the gap under the door. One of the means through which sound can travel into your bedroom is beneath your bedroom door. In order to tackle this in an effective way, you can close it by adhering rubber weather stripping to the bottom of the door.
• Upgrade the door of your bedroom. If your bedroom has a hollow core door which possesses a thin outer layer of wood with plastic or cardboard inside, then you’re likely to be feel more noise in your personal space than if you install a solid wood door. Making use of a heavy duty solid wood door will help block out unwanted noises from your room.
• Put the sound in the cloud. The solution may actually lie in the cloud particularly a ceiling cloud which is an acoustical foam cloud that is hung from the room’s ceiling to block out echoes and absorb noises.

In several parts of the UK, air conditioning systems are a must especially in the warmer summer months. Fortunately, if your AC system isn’t functioning the way it’s supposed to, suffers frequent system breakdowns when overworked mostly during the hot summer days or perhaps you’re just tired of just having to manage with window units, the latest air conditioning units offers both features and performance that’s superior to the earlier models. And as you would have expected, each facet comes with a cost.

There are a number of factors that can determine the cost of an air conditioning unit. Out of all these factors, the size of your home happens to be the most significant factor that influences an air conditioning unit’s cost. Air conditioning systems are measured in tons, which is a measure of the amount of heat they’re able to remove from a home within an hour. As a rule of thumb, you’ll require about 1 ton of cooling per 500 to 600 square feet. Unfortunately, the square footage alone can’t be used to determine the tonnage. Other factors that’ll also play a significant role includes the efficiency of your most preferred AC unit, how well the home is insulated as well as the thermal nature of your home. On the average, a new air conditioning system for an average home should be within the range of £1000 to £3000 for a unit as well as the installation costs which can vary largely depending on the condition of your ducts. These figures may seem quite expensive, but when the hot summer days come, you’d be glad to have had one installed in your home.

What Kind Of Paint To Use On Exterior Brick?

If you’re thinking about painting your exterior brick, you’d probably be wondering the kind of paint that’ll be most suitable for the project. If yes, you’re definitely not alone! Bricks are widely known for being notoriously difficult to paint due to their porousness and can also absorb paint. However, if you’re able to purchase the right type of paint and carefully prepare for your home’s brick exterior, you can make the process a whole lot more easier and cleaner while also giving your home a lot more updated look. It’s usually cheap, appealing and even protects your bricks from the elements which makes it even more durable.

The best type of paint to purchase is the elastomeric paint which provides the highest level of longevity. It’s actually more expensive than acrylic paint but it clearly outworks 100% acrylic paint by double in terms of both effectiveness and efficiency. The elastomeric paint is also super resistant to cold, heat as well as sunlight which makes it perfect for outdoor application. What’s more? It’s also dense enough to fill in cracks in the bricks but in such cases you might need to apply two coats. Overall, if you happen to stay in an inclement weather prone region, an elastomeric paint will help protect your home’s brick surface.

However, if you’re on a tight budget you can also consider getting an acrylic latex paint. This is a lot cheaper than elastomeric paint, but it’s also a great painting option for exterior bricks as it permits moisture to leave the bricks’ surface and helps to prevent mildew. Furthermore, you’ll only need to apply just a coat of acrylic paint.

There always seems to be lots of things to take care of when moving house. No matter how good your organizational skills may be, it Will be quite challenging to perfect all work without trace of slip.

Therefore, some questions are asked, how long does it actually take to move house? What is the average time to relocate? How long does the moving process take? How much time do you need to organize and perform a smooth and trouble-free relocation?These questions are very difficult to answer,Yet, you can get a rough idea of how long you are going to need to move to your new home.

1) Finding an Appropriate New Home

House hunting is exciting but very tasking. You look out for the perfect new property to buy or to rent in your new area one that is easily affordable and utmostly appropriate for your lifestyle.

2) Selling Your Old Home / Ending The Lease Agreement

If you’re moving out of a rented property, you need to recall the terms and conditions in your lease agreement and notify your landlord about your movement to a new house.

3) Ensuring Professional Moving Assistance

Unless you’re Moving just within the town or have very few items to relocate, performing a DIY move is not a recommendable option. You’re going to need professional moving assistance in order to ensure the successful outcome of your relocation, so you’re strongly advised to allow yourself enough time to research your moving options.

4) Putting Your Paperwork in Order

Have in mind that obtaining and/or updating all the necessary documents usually takes time, so you need to start preparing the paperwork as early as possible. Don’t forget that you will need some time to review and properly organize your papers, as well.

5) Organizing Your Belongings and Getting Rid Of Unwanted Items

When moving house, there is need to look through all your physical possessions and decide the fate of each and every one of them – set aside the things you’re going to relocate to your new home, throw away any useless.

6) Packing Your Belongings

Packing is the most strenuous and time-consuming task you’ll have to take care of when moving house.

7) Moving Day

The actual time your movers will need to take your belongings out of your old home and load them onto the moving truck depends on:

The number of boxes to be loaded onto the moving truck;

The number of furniture pieces and household appliances you want to relocate;

How well prepared you are,

The flights of stairs your items will have to be taken up or down or the free access to an elevator;

The moving truck accessibility.

8) Transportation to Your Final Destination

Depending on the actual distance between your old home and your new one, as well as on the traffic and the weather conditions at the time of your move, the transportation of your items may take from several hours (for a move across town) to about a week (when moving from coast to coast).

9) Unpacking and Settling In

It won’t take the movers long to unload your goods and take them into your new home (several hours, depending on the size of your shipment), especially if you know where you want each and every item to go. Upon your request, the moving experts will also help you reassemble furniture, connect appliances, and unpack your most essential items.

The time it takes to relocate depends on individual circumstance, Therefore, the average time to move house is estimated to be about 8-16 weeks.

This varies according to the quality of the conservatory and installation work. If these are both high quality, your conservatory should last at least 25 years. But obviously if you notice deterioration or leaks, then this could be an early warning sign that time is running out.