Find a Shop Fitter you can trust in Choppington.

If used and maintained properly, air conditioning can actually be a great way to create a healthier environment. As well as controlling the temperature, it also filters your air, removing pollutants like dust, pollen and mould particles.

However, to maximise these benefits, it’s important to keep your system clean. Dirty units and systems can become a health hazard, so always make sure you service your air conditioning at least once or twice a year.

If your boiler is leaking, there are some checks that you can do yourself. However, you should never attempt to repair your boiler yourself – only a Gas Safe-registered engineer should conduct repairs.

There are 3 main reasons why your boiler might be leaking: there’s a pressure valve fault, a temperature valve leak or corrosion in the system. An engineer will be able to spot the problem quickly, but in the meantime there are a few things you can do:

Check the pipe fittings

If your boiler is leaking water around the pipe fittings, it could be an installation fault and you should get in touch with the engineer that fitted it. You can check the pipe fittings by drying the area then waiting to see if the water appears again. If it does, you may be able to do a ¼ turn of the pipe to stop it. However, you should still call the engineer that installed it to ask them to check the PTFE tape on the inside.

Inspect the seals

Over time, the rubber seals on a boiler can start to perish, so if you have an old boiler this could be the source of your leak. If you have a new boiler, it could be caused by your boiler running over pressure.

Heat exchanger corrosion

Unfortunately, if a boiler engineer discovers that the boiler is leaking water from the heat exchanger, this is the end of the road for your system. The heat exchanger is the most expensive part of your boiler, so it makes more financial sense to replace your boiler with a newer, more efficient model rather than try to replace it.

Paving can be used for driveways and is capable of bearing the weight of cars and other vehicles. Ensure that you choose the appropriate type of paving, as some are designed for paths or decorative use. Correct installation is vital as improperly installed paving may move or break under the weight of a car.

No, air source heat pumps aren’t particularly noisy. Most models make about the same amount of noise as a boiler or fridge. And don't forget, the unit itself is fitted to the outside of your property so you won't hear a thing when you're indoors or at nightime!

It’s important to take plenty of time choosing your architect. They can have a significant effect on how successful your project is, so you’ll find it’s worth it in the long run.

Ideally, you’ll want the architect you choose to have plenty of experience in commercial property design and project management. If the building you’re creating or extending is for a particularly unique purpose, you may want to try to find a professional who has worked on a similar property before.

It’s also a good idea to use customer reviews to help you choose a commercial architect. If a company you’re considering doesn’t have any online reviews, ask them to supply you with testimonials or show you examples of their work.

Don’t forget that it’s vital to get on with your architect. You’ll need to communicate effectively to make sure that your project turns out the way you want it to, and you may be working together for a while. So, it’s a good idea to meet and speak with any commercial architects you’re considering before you go ahead and hire one.

First and foremost, the purpose of a landlord insurance is simple and pretty straightforward. It protects against risks associated with your rental property as well as activity. Most policies start out with building insurance as well as property owners’ liability insurance but you’re absolutely free to include several other covers. These covers can include tenant default or accidental damage, loss of rent and more depending on your needs. It’s important to note that varying types of landlord insurance provides coverage for different sorts of risks. For instance, building insurance provides coverage for the cost of repairing or rebuilding your property, while contents insurance provides coverage for contents if they’re damaged or stolen. However, the question is, does landlord insurance cover boiler? In this post, we’re going to shed more light into this to help you make informed decisions moving forward. Let’s take a look!

The short and simple answer to this question is yes, landlord insurance can definitely cover boiler break down! However, this is usually possible only if you select this option when you purchase your landlord insurance policy. With some boiler cover providers, you’ll have to include a home emergency cover to your landlord insurance so as to cover any form of boiler break down. Once this is done, if the boiler in your rental property starts to malfunction or stops functioning, a Gas Safe registered engineer would be sent to your premises to help out with the situation. With this, the repairing cost of your heating system would be covered by the insurance excluding any excess and up to the limit of your policy.

If you just acquired an electric shower or thinking about getting one soon, one of the first things that comes to mind is who to call on for help to handle its installation. Well, if you’re confused about the perfect tradesperson you’re certainly not alone! As we’re always told that electrics and water don’t mix, so who do you call when buying an electric shower? Is it a plumber, an electrician or probably someone who with a knowledge of both? Well, you’d find the answer here as we’ve created this post specifically to resolve this concern once and for all.

Refurbishing and renovating any part of one’s home always tends to be a tricky and daunting prospect and without a single doubt, the bathroom is not an exception. With a wide array of things to put into consideration such as plumbing as well as bathroom electrical safety, it always pays to have all your bathroom related questions answered before you go ahead to employ a tradesperson.

Being fully aware any task involving electrical works can be very dangerous, anyone that takes on a job such as fitting an electric shower must be qualified to work with electrics safely. This is referred to in the building regulations sections which is termed as part P dealing with domestic electricals, as such you may hear tradespeople term themselves as being “Part P qualified. What this implies is that they’re registered with a competent persons scheme like ELESCA OR NICEIC to self certify their work. Due to the high risk involved in their field, all electricians should be able to self certify their work, whereas only some plumbers should also be able to do the same. As a result, dedicated bathroom fitting companies should possess individuals who can deal with the plumbing, electrics as well as tasks such as tiling.

How Long Does A Locksmith Take?

It’s usually a surprising experience when a security issue that you might have thought is not resolvable or nearly impossible to overcome, took an expert locksmith just a couple of minutes to fix. This is not magic or some voodoo, it’s just a learnt skill being perfectly applied by an experienced and well versed locksmith. In this article, you’ll get to know what to expect when you call on a locksmithing professional for help with a security issue.

To determine the period of time a locksmith will take to complete his services, two factors are to be considered - the estimated arrival time as well as the service providing time.

Generally, if you call on a local locksmithing company, you should expect the locksmith to arrive within 15 to 30 minutes to your location. However, this might be shorter or longer if you put into account some influences such as the distance involved and traffic. Some companies can show up faster but charge an extra fee to it, while others will need more time to show up but offers a cheaper service. Usually, locksmithing companies will publish information about the estimated time of the arrival of their technicians on their websites. If you don’t find any, you might want to consider another company with one as this is a red flag.

The second factor which is the service providing time which depends on many influences including the type of lock and key in question. Therefore, it’s impossible to give a precise answer. However in general, a professional locksmith would not usually take more than an hour and half to create a new key for a car or house, or more than 10 minutes to unlock a house or car. Whereas replacement of a lock can take within the range 10 minutes to 40 minutes depending on the complexity of the lock.