Find a Shop Fitter you can trust in Wylam.

• Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
• Add a central step riser to stairs wider than 900mm to prevent them buckling
• Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth

• Step treads (the actual step themselves)
• Step risers
• Coach screws
• Deck screws
• Saw
• Drill

1. Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
2. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
3. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
4. After drilling pilot holes, screw the treads into the risers at each end with deck screws.
5. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.

Solar energy is renewable, as the sunlight it uses won’t run out. This means that it’s a great way to generate electricity without damaging the planet. So, installing solar panels to generate solar energy can be a great move for businesses looking to reduce their carbon emissions.

Adding brand new carpets is one of the quickest ways you can employ to revamp your room and update your home design. Whether you’re looking to inject a new lease of life through a splash of colour or perhaps you simply wish to replace the current worn out or tired looking thread-bare floor, a new carpet can go a long way to have a major impact on how your home feels and looks. At the same time, it can also be a relatively inexpensive way to make a significant change. However, it’s always essential to know the cost before carrying out such a project. In this post, we’re going to consider room recarpeting costs in order to help you make the best informed decision possible moving forward. Let’s take a look!

Generally, carpet are priced per square metre and the cost depends on a number of factors which includes the material as well as the manufacture of the carpet you opt for. On the lower side of the spectrum, you can expect to incur as little as £5 per square metre for a simple and synthetic carpet, while at the other end, a luxurious woolen carpet can cost in excess of £30 per square metre.

While the major and most significant part of the cost would be the price of the material itself, there are however other costs you’ll need to take into account. These costs includes the cost of the underlay which is usually within the range of £5 per square metre to about £15 per square metre, the carpet grippers as well as the cost of labour. Overall, the total cost for a carpet fitting job is normally within the range of £13 per square metre for a simple carpet and installation, and £50 per square metre for a luxurious carpet.

The cost of just the engineered wood flooringis from £18 to £73 per m2.

In many instances tree surgery work can still be carried out on trees that are protected by Tree Preservation Orders (TPOs). Tree surgeons will be able to file the needed forms with the local authority to arrange such work, and advise you throughout the entire process.

Also commonly referred to as brown rot, dry rot simply means a decay of the root as a result of fungi which may negatively impact the wooden structures in the interior or exterior of your home or property. When the dry rot happens, the fungi present breaks down the cellulose as well as hemicellulose – the components which are responsible for the strength and resilience of the wood. Consequently, the wood is left weakened and brittle while also appearing a bit blocky. Most often than not, dry rot affects damp timber, primarily with a moisture content that’s more than 20 percent. As a result of this, any dry rot eradication strategy should have the removal of the source of moisture to form the core of its activities. So, how can you identify dry rot? Let’s take a look!

• Examine the wood. At first, the fungus appears a lot similar to cotton wool and may also possess water droplets on its surface if there is a very humid surrounding.
• Look out for shrunken or sunken wood.
• Identify darkening and cracks in the structure of the wood.
• Identify affect wood that features flat skin-like grown that may appear like the exterior of a mushroom with shades of silver and grey. Most times, patterned with patches of light purple or yellow which easily peels.

Dry rot can be treated in a number of ways which includes epoxy treatments, commercial anti-freeze as well as copper compounds. The epoxy treatment simply means the act of filling in channels within the damaged wooden structure with an epoxy treatment to eliminate the rot and strengthen the structure of the wood. The commercial antifreeze is the treatment of the rot with antifreeze to kill the fungus and prevent further growth.

Exterior painters and decorators will prepare the areas to be painted for you. This will involve washing and cleaning the area and making sure that it’s a good quality surface. Cracks or holes should be filled in. In some cases, you may wish to have rendering redone before the painting is done.

When thinking of pests, a lot of thing comes to mind - while some individuals think about bug and insects, others think about squirrels, raccoons, mice an rats, in fact some might even out deer in that category. And well, they’re all right! Pests simply refers to any insect, rodent or wildlife that’s considered to be unwanted or undesirable due to the fact that they invade people’s homes or businesses wrecking havoc, causing damages and increasing the risk of communicating a disease or illness. Therefore, a pest control refers to the process of managing, which can be by using repellents or deterrents, or removing pests from a residential or commercial property.

The act of managing or controlling pests can be carried out using a number of techniques. You can decide to kill them using the services of an exterminator or doing it yourself, but you can also incorporate other methods too. These methods includes making use of sound to serve as deterrent or repellent to the pests as well as making alterations around the property to prevent pests from entering. In general, you should know that it’s always preferable to prevent pest than having to face one that has already been infested. However, if the problem already exist then there’s no two ways around it, you’d have to get them removed first.

A professional pest control service can go a long way to help when it comes to managing and controlling pests in any property. They carry out an inspection of the property to ensure that there are no pests inside, figure out where the pests are coming from and entering into the house, deal with pests already in the home, advise whether there’s any damage as a result of the pests, spray regularly to prevent the pest if you wish and also seal off the possible entry points for the pests.