Find a Shop Fitter you can trust in Henley-on-thames.

If you have an older canopy or have experienced a significant amount of rain recently, you might notice water pooling on your canopy. This is probably because there is some slack in your canopy, which allows water to collect instead of draining it off. See if there are places on your canopy frame where you can tighten it to keep it taught, and this should solve the problem.

If you live in an average home with an average amount of guttering and you’re used to a bit of DIY, it’s relatively easy to replace gutters. But if you have a home that’s more than two-storey or you have guttering that’s more complicated, it’s best left to the professionals.

Lots of homes these days have uPVC guttering. uPVC is a hard-wearing plastic that will last a long time without much maintenance except your usual gutter clearing. It’s relatively light, so lots of people think it’s easy to replace uPVC gutters. If you live in a bungalow, you may be able to just use a ladder to take down your old guttering and replace it with new uPVC gutters, but if you live in a two-storey home it can be a bit more complicated. If you do attempt to replace your gutters yourself, make sure you’ve got a sturdy ladder that will comfortably reach the right height, and never rest it on the fascia or the guttering itself.

If you have cast iron or copper guttering, this is much heavier and bulkier than uPVC. Certainly don’t try to replace these on your own – make sure you have another competent DIYer to help you. Reputable roofline specialists will use scaffold towers to make it easier to handle heavy gutters and they will always work in pairs on this type of guttering, so make sure you have the right tools and equipment to work with.

Just because it’s easy to replace gutters, it doesn’t mean you should. It’s better to ask a reliable roofline company to help you, since they have the skills to fit guttering properly and have experience with working at height.

With your finger probably hovering round the ‘order now’ button, one thing often comes to mind, what size of skip do you actually need? Being fully aware that there’s a huge array of skips sizes and hiring the appropriate size can make a whole world of difference when it comes to cost, efforts must be made to ensure you determine the right skip size before clicking on that ‘order now’ button.

To give you a better idea of skip sizes and the type of project that they are best suited to, we have decided to provide this simple breakdown that’ll make your decision process a breeze - quick and easy.

• 4 Yard Skips ( 3 cubic metres )

The 4 yard skip is best suited to small domestic projects like home or garden clean or clear outs, bathroom or kitchen refurbishments and the likes, due to its relatively small size. It has a capacity to carry about 30 bin bags at a go.

• 6 Yard Skips ( 6.5 cubic metres)

Do you want a skip for domestic purposes or for small commercial projects?if yes, then you should definitely give the 6 yard skip a shot. It has a capacity to hold up to 60 bin bags.

• 8 Yard Skips ( 6 cubic metres)

This skip size is best suited to large domestic tasks or light commercial projects. It has a capacity to hold up to 60 to 80 bags effortlessly.

• 10 Yard Skips ( 7.65 cubic metres)

With a skip size this big, both large residential and commercial projects can be handled with relative ease. Not only does it have the capacity to hold up to 80 to 100 bin bags, but also comes with an enclosed lid option, if you need an extra security for your property.

• 12 Yard Skips ( 9.18 cubic metres)

This skip size is best suited to both large residential projects and building sites. It has a capacity to hold up to 100 to 120 bin bags, and just like the 10 yard skips, it comes with an enclosed lid option for an extra security.

Click here to learn more about skips

There always seems to be lots of things to take care of when moving house. No matter how good your organizational skills may be, it Will be quite challenging to perfect all work without trace of slip.

Therefore, some questions are asked, how long does it actually take to move house? What is the average time to relocate? How long does the moving process take? How much time do you need to organize and perform a smooth and trouble-free relocation?These questions are very difficult to answer,Yet, you can get a rough idea of how long you are going to need to move to your new home.

1) Finding an Appropriate New Home

House hunting is exciting but very tasking. You look out for the perfect new property to buy or to rent in your new area one that is easily affordable and utmostly appropriate for your lifestyle.

2) Selling Your Old Home / Ending The Lease Agreement

If you’re moving out of a rented property, you need to recall the terms and conditions in your lease agreement and notify your landlord about your movement to a new house.

3) Ensuring Professional Moving Assistance

Unless you’re Moving just within the town or have very few items to relocate, performing a DIY move is not a recommendable option. You’re going to need professional moving assistance in order to ensure the successful outcome of your relocation, so you’re strongly advised to allow yourself enough time to research your moving options.

4) Putting Your Paperwork in Order

Have in mind that obtaining and/or updating all the necessary documents usually takes time, so you need to start preparing the paperwork as early as possible. Don’t forget that you will need some time to review and properly organize your papers, as well.

5) Organizing Your Belongings and Getting Rid Of Unwanted Items

When moving house, there is need to look through all your physical possessions and decide the fate of each and every one of them – set aside the things you’re going to relocate to your new home, throw away any useless.

6) Packing Your Belongings

Packing is the most strenuous and time-consuming task you’ll have to take care of when moving house.

7) Moving Day

The actual time your movers will need to take your belongings out of your old home and load them onto the moving truck depends on:

The number of boxes to be loaded onto the moving truck;

The number of furniture pieces and household appliances you want to relocate;

How well prepared you are,

The flights of stairs your items will have to be taken up or down or the free access to an elevator;

The moving truck accessibility.

8) Transportation to Your Final Destination

Depending on the actual distance between your old home and your new one, as well as on the traffic and the weather conditions at the time of your move, the transportation of your items may take from several hours (for a move across town) to about a week (when moving from coast to coast).

9) Unpacking and Settling In

It won’t take the movers long to unload your goods and take them into your new home (several hours, depending on the size of your shipment), especially if you know where you want each and every item to go. Upon your request, the moving experts will also help you reassemble furniture, connect appliances, and unpack your most essential items.

The time it takes to relocate depends on individual circumstance, Therefore, the average time to move house is estimated to be about 8-16 weeks.

How To Lay Tiles On Concrete

Installation of tiles on concrete sub-floors can be done with relative ease under adequate guidance. Here is what you have to do.

lPrepare The Concrete Subfloor

• Ensure the concrete is dry, clean and must be at least 6 weeks old.

• If there are dips and humps, level the concrete using a levelling compound.

lSet Out

• Working from the centre outwards, take a measurement of the floor (both length and width) and draw a cross at the centre.

• Lay out the tiles from the cross with a space of 3mm between each tiles. This will allow for movement stresses within the floor and later to be filled with grout upon installation of the tiles and adhesive dried.

lCut The Tiles

• Due to the particularly had nature of some floor tiles such as natural stone and porceclain, high quality tools are usually required to produce a clean cut through the tiles. With the help of an electric wet cutter alongside a slide cutter and nippers, your job would be made a lot easier.

• For a better result during intricate cuts, make use of a cardboard template.

lFix The Tiles

• The tiles should be fixed using a cement-based adhesive.

• Ensure to refer to the packaging or product data for the mixing ratios information.

• Stir the mixture till its lump-free

lApply The Mixture

• Spread the mixture onto the concrete sub-floor to create parallel ribs with the help of a floor trowel.

• Push the tiles into the parallel ribs.

• Clear out any excess adhesive from the tiles surface with a damp sponge.

• Do not walk on the tiles for at least 2 hours.

lGrout

• Once the adhesive is dried, wipe out any dust, adhesive or dirt from the tiles’ gaps.

• Mix about 4 to 5 parts of grout powder with 1 part of water and ix together.

• Apply the mixed grout diagonally across the tiles using a soft rubber grout float.

• Wipe out excess grout from the tiles surface and allow the tiles to dry.

• Stubborn residues can be cleaned using any washing up detergent with warm water within 24 hours after grouting.

The ridiculous, sprawling TV antennas are now a thing of the past - with the advancement in technology, today’s TV aerials combine both style and function at a price which is affordable. Now, we all want to get a decent signal in rooms without fixed aerials or watch TV on the go, without having to stress too much or pay an exorbitant price. If you’re looking to good TV aerials to purchase and install on your home or property, then you’ve come to the right place. In this post, we’ve selected some of the very best TV aerials around to help you make the best-informed decision possible moving forward. Let’s take a look!

RGTech Monarch

With an impressive range of 50 miles, this paper-thin and multi-directional antenna is top of the range. It’s able to receive the full spectrum of TV as well as radio signals which implies a clear and noise free 4k and 1080p content. It features a filter which prevents any interference from mobile phone with the signal. What’s more? It also possesses a whooping 15ft, double-coated cable which implies that the antenna can help you get signal in all corners of your home or anywhere you choose to watch TV.

One For All SV9465 Loop

Considering the 15 miles and signal gain of 48Db, this antenna offers a great number of features at a reasonable price. It’s also HD-ready and is able to offer support to content resolutions of up to 4k. The TV aerial uses multiple boosting and stabilization features including Automatic Gain Control to maintain a good signal and avoid dips.

1byone Indoor Freeview Portable TV Aerial

This is an extremely thin TV aerial which can simply be stuck to a window to improve range as well as signal strength. It’s 4k ready and has a range of up to 25 miles which should be no problem as no wall is likely to obstruct the waves given the fact that it’s meant to be stuck to a window.

How Much Do Roof Rooms Cost?

The price of your roof room may vary depending on your location within the country. Other factors that can also play a key role in determining the price of a roof room includes the conversion’s type as well as the legal and technical issues it’s currently facing. Usually, the cost of roof rooms will range between £1,200 to £2,000 per square metre. The differences in the price per square metre is influenced by the size of the alterations to the roof, the type of roof room to be constructed, the access, location as well as the finishing type.

• DORMER LOFT CONVERSION.

Here, one of the slopes of a pitched roof is substituted for a box-shaped structure. The outcome is a flat roof space which enables the fitting of full sized windows as well as the incorporation of several appliances. This is quite expensive as it involves a total rebuilding of one roof pitch alongside the complete internal works that are associated. The average cost of a standard dormer loft project will range between £25,000 to £50,000.

• HIP TO GABLE LOFT CONVERSION

Here a vertical brick wall is used to substitute the roof’s slope at the ending part of the terrace on detached buildings. The average cost of this type of roof room will range between £32,000 to £60,000.

• ROOFLIGHT LOFT CONVERSION

This basically involves fitting rooflight windows in the roof. Other improvements include flooring, plasterboarding, strengthening of the existing floor, as well as installation of rooflights. The average cost of this type of roof room will range between £15,000 to £25,000.

• MANSARD LOFT EXTENSION

This roof room can create an extra storey on top of an existing building as it makes a space featuring two or four external walls that are a bit sloped. The average cost of this type of roof room will range between £40,000 to £70,000.

Plasterboard or drywall is simply gypsum plaster covered from both sides by thick paper layers. It’s known to be a highly versatile product used on both interior walls and ceiling as a result of its numerous advantages. This popular material in residential buildings can be designed to be fire resistant, humidity resistant and noise resistant. They have a low impact on the environment, while also being quite easy to repair and perfect to hide stuffs from plain sight. Most home and property owners in the UK have this material installed in their space as despite the multiple benefits, they’re also quite affordable. However, if you’re thinking about installing a plasterboard on your ceiling, one challenge you’re likely to face is determining the appropriate plasterboard thickness to incorporate as this make or mar your entire project. In this post, we’re going to take a look at the right plasterboard thickness for ceiling so as to help you make an informed decision moving forward. Let’s take a look!

Firstly, let’s consider the size of the plasterboard sheet. The standard plasterboard sheet size is 120 cm in width and within the range of 180 cm to 360 cm in height. These sizes are designed to provide the much-needed support to the standard stud spacing which is 160 cm. Depending on the manufacturer, plasterboard can be in four different widths. Now talking about the thickness, there are two standard thicknesses of plasterboard - 9.5 mm and 12.5 mm. The sizes of plasterboard for ceilings are 9.5 mm or 10 mm. Most individuals tend to assume that the thicker the plasterboard the better, but this is absolutely false. A thicker plasterboard will only stick harder to the ceiling which will make it hard to seal joints if required.