Find a Shop Fitter you can trust in Axbridge.

Most installers will not need you to be at home while they are fitting your windows. It is a good idea to be present though, just in case they have any questions for you and perhaps for your own peace of mind. If you cannot be there, you will need to arrange access to the property and/or agree securing the property at the end of the day.

If you’re considering installing ground source heat pump, it’s likely you’re also wondering just how deep it’ll go into the ground to be efficient. Well, the initial step to take while determining the ground source heat pump’s design is to research the different options available to reduce the space heating as well as hot water demand. To achieve this, there must be an accurate measurement of energy efficiency which is usually done by getting an Energy Performance Certificate ( EPC) . This is helpful as such that it helps to identify the most suitable or the right size of heat pumps which will help reduce the consumption of energy, heat loss as well as hot water needs of the house.

Generally, ground source heat pumps are usually more compatible with new builds against retrofits. What’s more? The heat pump has two different types of loop systems :

✓ The open loop system and;

✓ The closed loop system.

The open loop system absorbs water from the ground and transfers this ground water via a heat pump to where it carries out the extraction of heat. Meanwhile the closed loop system extracts heat from the ground and incorporates a continuous loop of piping that’s linked to the indoor heat pump. There are a few types of closed loop system, these includes:

✓ The Horizontal Ground Source Heat Pump. This is installed in horizontal trenches of about 1 to 2 metres deep. This is more common in areas where land is readily available.

✓ The Vertical Ground Source Heat Pump. These boreholes are a more costly option but it’s also the best option when land is not readily available for horizontal installation. The insulation hole is dug at a minimum of 6 metres into the ground, while the entire piping will be at a depth of about 50 to 150 metres based on your home’s heat requirements as well as the ground’s composition.

A skip is a very convenient and great means of disposing the unwanted waste and rubbish in your home. When you kick start your home or garden clear out or clean, you’d discover you have a wide range of wastes to get rid of. However before the commencement of such a task, it is essential to understand that there are particular wastes that are not allowed to be put inside a skip for several reasons by the relevant authorities. There are a handful of regulations that determines what goes into a skip and what cannot. And somewhat interestingly, this may differ depending on the skip company you recruit.

With the presence of an array of skip hire companies in the market today, there are several that can allow almost all types of wastes in the skip. However, some of the most common wastes that can be placed inside a skip includes the following:

• Broken furniture pieces

• Plastics ( because they can be easily recycled)

• Solidified paints

• Furnishings and non electrical fittingd

• Uncontaminated soil

• Cardboard and plastic packaging items

• Metal

• Branches and leaves

• Bricks, wood and rubble

It is advisable to ask your skip hire company what you can put in the skip and what you’re not allowed to put in the skip before moving forward. The guidelines can vary from a company to the other and as a result, there is the need to conduct a proper consultation with a skip hire company to help erase or confirm the fears you might have about your unwanted waste or rubbish. This is to ensure the company selected perfectly matches your proper waste disposal needs. When you’re able to select a reliable skip hire company, all your unwanted waste disposal worries would be completely obliterated. Click here to learn more about skips.

The short and simple answer to this question is yes, it definitely does matter if the graffiti has been there a long time! When it comes to graffiti removal, one thing to have at the back of your mind is prompt removal is always the most effective. However, this doesn’t mean that a long existing graffiti can’t be removed. Graffiti that has been in existence a long time can be removed, but you shouldn’t expect this to be a walk in the park. If you don’t have the experience, tools and skills to pull this off, it’s strongly recommended that you call in a qualified professional for help so as to ensure the best result is achieved without any form of damage to your walls.  However, if you wish to give this a shot, then here are some tips that should put you in the right direction.

Here, we’ll advise you to get an effective graffiti cleaning solution such as Elephant Snot® to remove the long existing graffiti. To start the removal process, simply brush the product ( Elephant Snot® ) with the help of a wallpaper brush on the affected wall. Once completed, let the product sit for about 45 minutes to 1 hour to make for an easy removal. After this, you can then proceed to power washing it off at about 1400 to 1600 psi cold water. This should remove virtually all the paint leaving only a few behind. Identify the remaining stubborn graffiti and go for a second application. Repeat the process until the graffiti has been fully washed off. This should leave no damage to your wall whether brick or mortar.

A Velux window is a brand of roof window, but the brand is so popular that people often use the name to describe the entire type of window. They are windows that are installed at the same orientation and ‘in plane’ with the surrounding roof, and they’re usually installed at a minimum of a 15-degree pitch. You can buy roof windows that offer completely frameless internal views for a really clean look in your loft conversion, while some come with built-in shutters.

Velux windows aren’t to be confused with rooflights which usually refers to a glazed unit that’s installed on a flat roof. It might also mean a window that’s been installed on a pitched roof out of plane with the level of the tiling.

People also confuse roof windows with skylights, which normally can’t be opened or closed and are usually smaller than Velux windows. Skylights, therefore, only let daylight into the room whereas roof windows also help with ventilation.

If you’re using your loft as a room in your home rather than simply for storage, you must have a roof window installed. Skylights won’t be enough as they don’t allow for ventilation. It doesn’t have to be a Velux window – it can be any type of roof window. Luckily, they tend to come in standard sizes and they must be CE marked if they’re sold as a roof window, so they should be easy to find.

How To Lay Wood Flooring

Laying of wood flooring is actually a very simple task contrary to many beliefs. First and foremost, before commencement of the fitting process, you must determine the direction you would like the engineered wood flooring to lie in. To do this the right way, they should lie in the direction of the the longest wall. However, if your subfloor is wooden, then having the boards positioned across the joists underneath would be your best bet to get started.

Here are some simple steps to follow to properly lay your wood flooring:

• Start from a corner, working from left to right and place the initial rows of the boards with the groove’s end directly opposite the closest wall.

• Make use of expansion spacers. Place them in between the wall and the board alongside an expansion gap of about 8 to 10mm.

• Place the board’s final rows at about 100mm wide. To achieve this, it is crucial to be pro-active with the measurement and cut the boards (if you deem fit) to adjust the first row.

• With the help of the click system, the boards will click together.

• Fit in the next board. Ensure to attach the tongues together (30 degrees from the floor) and once done, you can proceed to lower and lock it in place. Do this till you get to the end of the row.

• Cut the last board of the row to size if its too long.

• If the part cut off is up to 300mm, simply use it to start the next row. If not, cut a new board in half to use.

• Put the rows side by side in such a way to ensure the joints are staggered at each and every row. Keep a consistent gap between the wall and the planks via the continuous use of the spacers.

• Lay a plank over the last row to determine the width of the previous board. Position a new plank in a way that its tongue is directly against the wall. Once done, proceed to mark a line of plank underneath to get the required width. Then, fit the plank into the space with the help of a pull bar and hammer.

Click here to learn more about wood flooring.

The deposits of asbestos are commonly found in both rocks and soil throughout the globe. Historically, this material has been incorporated for more than 4,500 years for a number of purposes by our ancestors. However, mining of asbestos in large scale started only in the 1870’s in Quebec, Canada. It only took about a decade after this commencement before other countries picked the trail and also began the production of asbestos for industrial uses as asbestos rapidly grew to become an ubiquitous phenomenon across many nations of the world such as the USA, Russia, Italy as well as South Africa.

Today, several countries have placed a total ban on the production as well as exportation of asbestos as a result of the harmful fibre it contains. Asbestos has been discovered to be a life threatening material which when disturbed, it releases a harmful fibre that can lead to a number of serious health issues if inhaled over a long period of time. Most recently in 2019, the material was popularly banned in Canada, who for several years has operated the world’s largest mine of asbestos in Quebec.

Despite how harmful the material is, it’s however still being mined in some countries with some of its exporters being Russia, Kazakhstan, China as well as Brazil, with Russia taking the lead, covering for over 53 percent of the world’s total production.

Contrary to many beliefs, asbestos is not a man made material but a group of six types of naturally occurring fibrous minerals that are commonly found in rock and soil which are collectively known as asbestos. These minerals are primarily composed of both silicon and oxygen but also includes other minor elements.

How Much Does A Boiler Repair Cost?

An annual service for your boiler might not seem important and may be easy to postpone to another day, but when it happens to breakdown due to lack of adequate attention, this can be quite painful and also costly.

Before you start thinking about the cost of repairing your boiler, the first thing you’ll need to confirm is whether or not your boiler is still covered by the manufacturer’s warranty. You’d be amazed some warranties can last for as long as 12 years, if yours is still on then you can save yourself a huge amount of of money on your boiler repair. As a result, it’s always crucial to keep the details of your warranty somewhere safe, so you can read them from time to time. You never can tell when the rainy day will come!

Most boiler warranties will require your to get your boiler serviced on an annual basis by a licensed and qualified technician. The cost of an annual boiler service is affected by the time of the year you wish to get it done. When boilers are less useful during the summer months, an annual service is usually relatively cheap when compared to the cold months. Around this period, a boiler service will normally cost within the range of £100 to £150, however for a more accurate quote it’s advisable to contact a couple of professionals and compare their quotes.

The cost of getting a boiler repaired will be affected by a couple of factors including your boiler’s make, the age of the boiler as well as your location and how urgent you need it done. If you have a dead boiler, the cost will typically range from £96 to £348 and a boiler displaying a fault code will cost within the range of £90 to £275. Generally, repairing a boiler will cost within the range of £90 to £400 based on the several factors stated above.