Find a Shop Fitter you can trust in Southwold.

The bigger the ground source heat pump, the better right? Wrong! And you’ll definitely be sorry to make such a huge mistake. When planning to install a heat pump, determining the size of the ground source heat pump is not as direct and straightforward as many homeowners would think. Here, you’ve got only a small margin for error. When the pump is too small, the heat pump will make use of the backup heater too often and in the event whereby the heat pump is too big, it’s going to short cycle. Both situations are preferably avoided as they’ll both leave you with an expensive and inefficient system.

To get the accurate size of a heat pump, there’s usually the need to hire the services of an expert and licensed heat pump installer who possesses a top notch design calculation software. In reality, the majority of inefficient systems are caused by a lack or poor understanding of the suitable design software.

There are many factors that can influence the calculation of a home’s heat pumps size. These includes

✓ Radiators and underfloor heating sizes

✓ Insulation, property fabric as well as heat loss

✓ The number of rooms in the property

✓ The types of rooms and their uses.

✓ The desired indoor temperature for varying rooms

✓ Seasonal temperature fluctuations.

Generally, a bigger house will require a bigger ground source heat pump. With an eye on the age of the property, heat loss as well as the types of the rooms, a house of about 100 square metre can require up to 4kW ground source heat pump. And for a house that’s about 200 square metre, the ground source heat pump also doubles to 8kW.

How To Tile A Kitchen Wall

Tiling a kitchen wall can seem like an easy task until you get started. Errors made will forever be evident for everyone to see unless you’re prepared to spend some extra bucks. When done right, it can actually be a very satisfying project, but don’t even think about rushing into it. If you lack a proper training or experience, it’s advisable to leave the task to a skilled professional for the best results and to avoid extra costs. This guide is meant to give you a detailed insight into the process and help you avoid possible errors.

lPreparation

• Ensure you have the required amount of tiles, adhesive and grout.

• Take the tiles measurement and calculate in square metres.

• Determine the number of tiles to be used and add about 10% to the total number to cover for possible wastage.

• Check to surface to make sure its clean and dry.

lMark Out The Area To Be Tiled

• Mark out the width of the tiles with spacers using a baton of timber.

• Position a tile against the bottom-most point and draw a line.

• Put a baton along this line and follow this by a vertical line at the wall’s end.

lInstall The Tiles On The Kitchen Walls

• Apply an even layer of adhesive with a wall trowel on the kitchen’s wall surface.

• Place the first tile on the adhesive and apply small pressure, do this for the remaining tiles with similar pressure to ensure its levelled.

• Make use of tile spacers to get a uniform space in between.

• Leave the adhesive to harden before applying the grout.

lGrouting

• Remove the tile space and clear out excess adhesive

• Prepare the grout

• Make use of a grout float to apply the mixture into the joints.

• Let the grout dry up a bit before washing the surface off with a sponge and water.

When it comes to gas boilers, this is one of the most frequent questions that always pops up and for a good reason. When you invest a considerable amount of money to acquire and install a gas boiler in your home or property, it’s only reasonable not only to expect the boiler to warm up your home efficiently, but also to do so for a long period of time. If you’ve just bought or about to get a new gas boiler, it’s likely you won’t have to worry about getting a replacement for a lengthy period of time. Several gas boilers will last for anywhere between 10 to 15 years on the average. However in the event whereby you have an existing one that’s fast approaching the end of it’s useful life, then you should know the time go get a new gas boiler is just around the corner, and the earlier you make the purchase, the better (to avoid any surprise breakdowns that’ll leave your home super uncomfortable).

Just like any other home appliance, it’s a fact that an older gas boiler ( especially those that have been installed over a decade ago) are significantly less efficient that the new modern ones. When the older versions were manufactured is a completely different time to now as both technology and climate concerns are wide apart. So when your existing boiler is approaching the end of it’s useful life, it’ll be wise to start saving up to cover the cost of getting a new one. However, if it’s only about 5 years ago your boiler was installed, it’s highly likely to still be very efficient.

No matter how small or little your lean to conservatory is, the benefits that can be derived from it remains immense. Not only does it add to the value of your home by making it more attractive to potential buyers and securing you a long term investment, but it can also serve as a relaxation or hang out spot with family and friends. In fact, with the lean to conservatory’s simplistic design, it happens to be an economical way to extend your home and also to maximize your living space. If you’re considering to build a small lean to conservatory on your property, then you’d probably want to know exactly how much this is going to cost. In this post, we’re going to look at the price involved in constructing a small lean to conservatory.

When it comes to building a lean to conservatory, there are a bunch of factors that’ll play a key role in the final cost of the project. For example, you’d have to make a decision on the glazing options, roof type, size and more. All these factors will have a huge impact on the final cost you’re going to incur to complete the project. For instance, a polycarbonate roof material lean to conservatory with a size of 3500mm x 2000mm will cost within a range of £7000 to about £8000, while a glass roof material lean to conservatory of the same size will cost within the range of £7500 to about £8500. In order to get a more accurate cost estimate for your small lean to conservatory project, there’s the need to call in a professional to discuss your specific requirements as well as budget.

After making the decision to refurbish your home or property, the next obvious step is finding the right builder to get the job done. The process of getting a good and reliable builder can be a very tricky one especially when you don’t plan ahead. And in truth, the outcome of your house refurbishment project can only be as good as the contractor your hire. Consequently, finding the perfect builder for your task should be a top priority to get the best return on investment. Here are a few sources that will put you in the right direction to finding a reliable home refurbishment company.

✓ Friends, Relatives & Neighbours

If you have a friend, relative or neighbour that have recently completed a home refurbishment project, you can go for a visit to check out the work done. If you’re pleased with the work, you can proceed to ask about the work ethics of the builder and get the contact if satisfied.

✓ Internet

With the rapid rise of online technology, there’s hardly a service you can’t find on the internet. Websites like HomeAdvisor have been helping people find their desired service providers with relative ease for so long. To get the right building contractor online, it’s advisable to check reviews as well as testimonials before moving forward. Nowadays, you’re most likely going to find so many positive online reviews as some businesses now go to the extent of dubiously writing good reviews for their companies. As a result, it’s recommended to pay closer attention to the negative reviews and check if it’s something you can cope with before hiring a contractor.

✓ Store Contact Lists

You’ll discover a long list of building contractors on several stores trading building materials. These builders may not be affiliated with the store owners, but many stores see it as their responsibility to point you in the right direction so that the building materials acquired from them can be put to good use.

In recent times, more and more home and property owners are starting to come to terms with the large returns and little investment in cavity wall insulation provides. For a relatively little amount you can achieve a lot, from an increase in your home’s energy efficiency and reduction in heating bills to a huge boost in your property’s resale value and lots more. This makes you wonder how an ordinary insulation can help you achieve so much, right? Well, you’re definitely not alone! Several other potential investors are also eager to know exactly how the cavity wall insulation works to deliver all these juicy benefits. In this post, we’re going to go provide you with a detailed insight on how cavity wall insulation works. Let’s take a look!

Typically, cavity wall insulation works as acting as a shield which prevents the escape of heat from your home. It features a reflective surface which serves as a barrier to reflect heat from one side of the panel, effectively minimizing the amount of heat conduction that escapes through. This protection of your home from heat penetration comes with a couple of benefits with the obvious one being an incredible thermal efficiency. An insulated home or property is able to maintain a much more balanced temperature throughout the year – staying a lot cooler during the summer months and retain the heat generated during the winter months. However, a less talked about benefit is the fact that when an insulation is done during the construction of a house, the whole development phase can be completed a lot quicker. This is mainly because insulation offers total protection against weather conditions which enables internal trades to continue without the need to wait for brickwork or cladding to be completed.

As you would have guessed, patio doors are exactly what the name suggests. They mainly act as a means by which you can access your patio from inside your house. As a result, they’re mostly fitted at the rear of your home which leads out to the garden and ultimately, the patio. In recent times, it’s mostly unlikely to see patio doors installed in homes without patios or homes with deckings instead. Generally, patio doors feature large floor to ceiling windows that are able to offer a wide open view of your garden as well as patio. In short, these characteristics are what mainly makes them unique from other normal exterior doors.

There are different types of patio doors which you can choose from and all with their own unique installation costs.

• Sliding Doors

Due to their space saving qualities, this type of sliding door are a popular choice amongst homeowners. As the name suggests, they basically slide across panels rather than opening in or out. This style also comprises the most significant windows which gives you a wider and clearer view of your garden while also allowing more natural light into the house.

• French Doors

Offering a standard design with two different panels with each able to swing wide open on its own, the French door is a conventional style door popular amongst traditionalists. French doors are generally stylish and very energy efficient, however they tend to consume more space within your home. It comes with several designs and a variety of colours to choose from.

• Bifold Doors

Bifold doors are the ideal choice if you want a more modern style for your home. These doors almost folds itself whether open or closed. Generally, they move along a track similar to sliding doors, but each panel folds when open. Here, you’re still offered the floor to ceiling wide open windows which further makes the overall effect even more special.

How To Remove Flaking Paint From Exterior Walls

For a successful exterior wall painting project, all that’s required is the right painting tools and equipments, the appropriate exterior paint as well as the necessary preparation of the surface. With the later being perhaps the most important part of the project which is likely to take your time and effort as there’s no short cut to it. But once you have a good idea on how to prepare the exterior wall’s surfaces, the painting of the exterior of your house becomes a lot easier. And a good example of this, is the process of removing the flaking paint on the surface. Fortunately, you do not require the skills of an expert to be able to remove the flaking paint from your exterior walls. So let’s take a look at how you can remove flaking paint from your exterior walls with relative ease.

✓ Clear all flaking or peeling paint. This involves scraping the entire painted surface with a scraper to remove all loose paints. For the paints that wouldn’t yield easily, you can apply extra pressure to wipe it out. However, it’s important to be careful while doing this to avoid gouging out or damaging the surface.

✓ Use coarse sandpaper. Make use of a sandpaper to sand all the exterior wall’s surfaces until they’re smooth. When you get to tight spaces and trim, you can incorporate a sanding block to make your job easier and more effective. Note that a smoother surface will make for a better adhesion.

✓ Use an orbital or power sander. If the paint is peeling, you can scrape it off perfectly with the help of a power sander. This will help you in achieving a smooth surface on inaccessible edges and more.