Find a Shop Fitter you can trust in Camberley.

If used and maintained properly, air conditioning can actually be a great way to create a healthier environment. As well as controlling the temperature, it also filters your air, removing pollutants like dust, pollen and mould particles.

However, to maximise these benefits, it’s important to keep your system clean. Dirty units and systems can become a health hazard, so always make sure you service your air conditioning at least once or twice a year.

How Wooden Conservatories Add Value To My Home?

Wooden conservatories does not only offer a bright and exciting way to increase both your entertainment and living space, but can also go a long to add immense value to your home. If you recruit master craftsmen to utilize superior quality wooden materials to build your conservatory, it can boost the value of your property by 5 percent - ranging between £13,000 to £15,000.

Like many other construction projects, the amount of value that’ll be generated by a wooden conservatory depends largely on the quality of the materials and construction utilized. A higher quality wood like an Oak or Iroko will definitely add a greater value to your home than woods of a lesser quality.

Below are some good points you can put to use to ensure you get the best return on investment.

• Do not alter your home’s style

If you have a modern home, building a traditional conservatory would not only make your home have an inconsistent appearance, but also reduce its value. Ensure that your wooden conservatory has a similar style to your home to derive maximum value.

• A great looking and professionally done wooden conservatory equals a great value

To maximize the possible benefits from your wooden conservatory, it is essential to use a reputable company with a fantastic portfolio.

• Strike a balance between garden space and your conservatory size

A big or moderate outdoor space is just as valuable as your wooden conservatory. So when building your conservatory, do ensure to take the outdoor space into consideration, as a little garden space can imply a negative ROI.

• Consult a local estate agent

The size, style and construction of your wooden conservatory can greatly impact its value. A local estate agent can assist you to determine the potential ROI.

Click here to learn more about wooden conservatories

You should pull up and remove weeds by hand as and when they appear. If it is a regular problem, you might need to reseal the paving. In extreme cases, the sub layer itself may need to be re-laid. You can use weed killer, however some paving can be discoloured by stronger weed killers.

Are you a new homeowner? Or perhaps you’re simply looking to revitalize your home by adding some new flooring options. Wooden flooring is one of the most popular flooring options amongst home and property owners in the UK due to the multiple benefits it offers. It adds your home’s curb appeal making it stand out while also adding to resale value of your home - should you decide to sell in the near future. When it comes to the installation of wooden flooring, you have two options which includes carrying out the installation yourself or calling in a professional for help. While some homeowners would prefer to tackle this themselves, it’s highly advisable to get professional support for the project. In this article, we’re going to consider some of the benefits you stand to derive from getting your wooden flooring installed by a professional. Let’s take a look!  Efficient installation. Since professionals do this type of work almost on a daily basis, they’re generally able to complete a basic job within a day or two. With them, you’d be certain that you job would be completed to perfection within a certain timeframe.  Access to a range of wooden flooring options. Professionals are usually familiar with top notch wooden flooring options so they’re able to make recommendations on the most suitable wooden flooring type for your home and needs.  Flooring removal. Professionals typically remove old or existing flooring and clean up the area prior to the installation of the new wooden flooring. This way, you wouldn’t have to bother about hiring someone else to remove the existing flooring or to clean up the entire area before you can be able to install the new wooden flooring yourself.

Have you being considering the options available to you for removing the conifers around your home? Or perhaps you’re just planning to raise some structures in an area where you have lots of conifer trees. Regardless of your reason for wanting to remove a conifer tree, you’ve come to the right place!

There are multiple options to remove a conifer tree based on the one that best suits your needs. Some individuals are okay with felling the tree and leaving the stumps behind, while others don’t just want both the tree and the stumps so they poison the tree and subject the stumps to a quick rotting process.

lThe Physical Method

This basically involves felling the trees with the help of powerful machines and other tools. Let’s take a look!

• Early preparation. Get your chainsaw ready alongside your pruning tools as well as other equipments that can prove to be useful.

• Determine the direction you want the tree to fall. You must ensure there’s no passerby risk or risk of damage to any property whatsoever.

• Cut down the trunk. Put your chainsaw to use. First cut doen the branches and twigs before felling the tree.

• Choose your cutting technique depending on the tree’s size, slope and chainsaw available.

• Check for possible infestation before removing the conifer tree.

• Remove the conifer stumps by grinding the stumps out (use a grinder) and setting fire to consume the stumps.

lThe Chemical Method

To carry out this process, you need to first cut down the large tree branches using a chainsaw. Once done, cut off a portion around the circumference of the trunk below the lower branches, close to the root. Leave the bark’s strips connected to the conifer tree to expose the inner tissue.

Mix the chemicals and apply into the conifer tree directly until the whole surface is covered. This will make the conifer tree to die off gradually for a couple of weeks.

A roof serves as something which is so much more than just a top of a building. A roof delivers guard from the elements and precipitation, it also helps drain water from a structure, and helps to provide insulation to the structure allowing it to keep the interior of a building cool or warm, according to season.

There are several steps to building a roof

Mount the trusses.

This step requires the building’s wall frames to be completely level, square and plumb. If you are building the roof onto a building that is still a frame you must use ladders or scaffolding. Hoist the trusses onto the roof.

Install temporary braces.

You will need to install temporary braces that the trusses can rest on until the sheathing and permanent bracing are installed, this has to be done before you install the trusses. At the centre of the back wall, nail the bottom half of one two-by-six board that's 16 feet long to the top of the outside wall, making sure you fasten it to a stud.

Install the end trusses.

Install the two end trusses at the front and back of the building, making sure you affix them to the temporary bracing. The batten you take will have to be a bit longer than the distance will separate the trusses.

Install the standard trusses.

According to the instructions provided by the manufacturer, you will first need to install the first standard truss. You will also need to nail it to the batten from the first truss.

Sheath the roof.

Once your trusses permanently braced, you can begin with the sheathing of the roof. Starting from the bottom corner and moving across the bottom, the sheathing is installed lengthwise.

Install the roof cover.

Like the sheathing and underlayment procedures, the roof cover is installed lengthwise from the bottom up. The shingles should be staggered, and they should also overlap at the same time. You will need to work up to the ridge and use a ridge cap shingles to finish the ridge.

Air source heat pumps are a type of heating system that you can use to warm the air in your property. They’re a semi-renewable energy generator as, although they use electricity, they extract and use renewable heat from the air.

There are two main types of air source heat pump – air-to-water, and air-to-air. Air-to-water heat pumps are the most popular, and are best used to heat water that supplies underfloor heating systems or large radiators. Air-to-air pumps heat air, which is then dispersed round your property using fans.

Do you want a low carbon way of heating your home? Then, getting an air source heat pump is the way to go! What they do is pretty simple - they absorb the potential thermal energy present in the outside air and transmit it directly to the home or property where it’s going to be compressed and the heat transferred with the help of a number of coils. In other words, it functions by extracting heat from a cooler place and then uses it to raise the temperature inside a home or property. Being very similar to air conditioning units, the amount of heat they’re going to produce for your home or property will be dependent on the size you install. Therefore, the bigger the heat pump, the more the heat that’ll be generated.

Air source heat pumps have two main types which includes air to air and air to water. Air-to-water heat pumps works by absorbing heat from the outside air, then relays it directly into your home or property through the help of fans. In order to move the heat around your home, you’ll need a warm air circulation system. This type of air source heat pump are not eligible for the government’s Renewable Heat Incentive Payment as they can’t generate hot water. What’s more? They can function in reverse during the hot summer months.

Air-to-water heat pumps, on the other hand, operates by extracting heat from the outside air and transmitting it into the wet central heating system. Due to the fact that they’re able to generate heat that’s cooler than the one generated by a conventional gas or oil boiler, they happen to be a better fit for larger radiators or water underfloor heating.

Are you thinking of installing solar thermal systems in your home or property and wondering exactly how it works to generate electricity? Regardless of your motive, in this article you’ll learn in simple details how solar thermal is how solar thermal doesn't provide electricity for your home.

If you are looking to generate electricity for your home then Solar PV are able to generate electricity simply by absorbing and focusing sunlight in such a way to create a temperature level that’s high enough to generate the much needed electricity. There are two main components that comes with the solar energy collectors of each. These two components include, the reflectors ( mirrors), which works to absorb and concentrate the sunlight onto a receiver. In several types of the solar thermal power systems, a heat transfer fluid is then heated and distributed in the receiver so as to generate steam. Once the steam as been produced, it’s then transported to the turbine where it’s turned into a mechanical energy, which in turn powers the generator to produce electricity.

Solar thermal power or electric systems are usually embedded with a tracking system which keeps the sunlight concentrated on the receiver all day long as the sun changes position in the sky. They also come with a wide array of collectors which works of distribute the heat absorbed to a turbine as well as the generator. A lot of solar thermal power facilities will gave two or more plants with different arrays and generators.

Solar thermal power systems can also have a thermal energy storage system component whose work is to permit the solar collector system to heat an energy storage system during the day while energy storage system’s generated heat is incorporated in the production of electricity at night or during a cloudy weather when there’s not much sunlight.