Find a Shop Fitter you can trust in Thames Ditton.

If you’re thinking about adding new power sockets to your room, then you’ve come to the right place! This task can be a very tricky one especially if you don’t know how to go about it. If you don’t have the skills or experience necessary to pull this off, then we’d strongly recommend you hire the services of qualified and licensed electrician who can guarantee the best results for help. In this guide, we’re going to take you through the numerous steps you’d have to take to make sure your new power sockets is added successfully. Let’s take a look!

• All the power to the working area at the primary electrical panel should be turned off.
• Identify the cut area for individual electrical box.
• Pilot saw blade by drilling corner holes
• Drill into framing for wiring, if required
• Connect electrical wires to the electrical panel from the outlet box holes, pulling four feet through the wall.
• Attach white wires to silver screws as well as black wires to brass screws and also the ground wire.
• Incorporate electrical tape to tape around the box
• Connect the box to the wall and cover with the outlet plate
• Carry out the process for individual outlet needed
• De-energize the entire electrical panel by shutting off the house’s main breaker
• Fit an arc volt breaker by connecting white and black wire to the breaker
• Connect white wire from the new breaker directly onto the neutral bar of the electrical panel
• Finally, you can turn the main breaker back on.

Intruder alarm systems work in various ways and all with one goal in mind - ensuring the safety of both the building and valuables. Whether it’s a small or big home or property, there is a wide range of systems that can be installed to guarantee adequate protection from unwanted visitors. They work with various applications and you get to determine the action to be made in the event whereby the protected zone is violated and system triggered.

Intruder Alarm Systems come in three main types which includes:

• The Bells-Only Intruder Alarm System - Whenever there is a violation, the only action would be to trigger the alarm, nothing more.

• The Communicators - These alarm systems are basically speech dialers which automatically sends a message to various selected number whenever there is an intrusion.

• Monitored Systems - Here, the monitoring centre would be alerted once there is a breach in security.

However, irrespective of the type, most intruder alarm systems operate following a similar series of steps.

lSensing of motion. The systems usually feature door and window sensors which detects any contact of the door/window in the frame when shut. There are also the motion sensors which can be strategically stationed across the property to detect any motion and possible breach of security.

lTriggering of the control panel. The system is interconnected, and all components are linked to a control panel where all detectors’ and sensors’ generated informations are relayed. The alarm countdown is activated in the event whereby a contact is made and circuit impacted.

lSounding of the alarm - Once the alarm countdown has been initiated, failure to insert an abort code will ultimately sound the alarm. The external sounder that comes with the system produces a loud sound to notify people about the security breach or intrusion. There is also an interior sounder which works to bring the presence of an intruder to the awareness of the occupants.

lDeactivating the alarm. With the control panel, users can easily activate/deactivate the alarm system via a fob, code or selected smartphone apps. Click on the link to learn more about intruder alarm systems - https://alarm.quotatis.co.uk/3-ways-home-security-systems-keep-safe/

How to joint pave or grout paving slabs is a common question asked by several home owners. Most times they may have some existing paving and thinking its high time to have them re-pointed or laid some new pavings and wondering how to fill the gaps.

In the UK, patios don’t get much use especially during cold winter months. However even when not in use, the combination of wet weather and cold temperatures is capable of having the hardest outdoor living spaces looking a bit neglected. This may lead to cracked grouting which leaves gaps between stones making way to a place where weeds can grow and flourish during spring. You definitely wouldn’t want your outdoor living space looking this messy. Hence, there’s a need to get your patio back on track by grouting the paving slabs. However, if you lack proper training or experience, it’s advisable to employ a reliable professional who can guarantee the best results. In this guide, you’ll learn more about the paving slabs grouting process.

• Saturate the area that needs to be repointed with the help of a hosepipe and/or watering cans. Use a yard brush to distribute the water across the paving slabs.

• Pour a generous amount of your compound product over the newly soaked patio.

• Sweep the into the joints where it’s needed with the help of a broom. Do this carefully in order to make sure each and every joint is fully filled with the compound. If done right, this can help prevent premature cracking for a long period of time.

• Once the joints are filled with the compound, brush aside the exces product and strike it in. Ensure that the product is pressed firmly into each gap leaving behind no spaces.

• Sweep out the excesses which can be kept for future use.

Range cooker hoods should be installed between 65 -75cm above the hob. However, you should check installation instructions, as some cooker hood styles need to be installed slightly lower. If you fit your cooker hood too high, it will reduce extraction performance.

Overseeding your lawn is an essential part of keeping your lawn looking its best. It’s also known as reseeding, and helps to repair damaged areas that might have been caused by a harsh summer or winter. It’s best to overseed your lawn during the spring or autumn, when the temperature is mild but there’s still a fair amount of rainy days to help the grass seed grow. To prepare your lawn for overseeding, you should do the following things around 1-2 weeks beforehand:

• Weed the lawn by hand or using a weedkiller (make sure you leave enough time to do this according to the instructions)
• Remove stones and large twigs
• Scarify your lawn to remove moss and loosen soil
• Fertilise the soil with a quick-release fertiliser

Once you’ve taken these steps, you’re ready to start overseeding your lawn.

1. Mow your lawn to around 25mm in length.
2. Water the soil so it’s moist but not too damp.
3. Sprinkle your new grass seed evenly over the lawn, but apply more in patchy or thin areas. Generally gardeners say to use 35g per square metre, but up to 50g on thin areas.

When you’re finished, give your lawn a final water, and do this every day until the new grass is established – particularly if it’s not rained. Just make sure you don’t overwater it. It’s also a good idea not to walk on your lawn for around 2-3 weeks after you’ve overseeded it.

Coloured double glazing windows are more expensive than white ones, in general. uPVC is the cheapest material to use for double glazing, and white is the standard colour. But there are endless possibilities in terms of colours you can have, and they do come at additional cost.

Some people choose to have coloured double glazing that matches or opposes the colour of the exterior of their house. Another popular option is a woodgrain effect, which from a distance looks just like more expensive timber windows. The best thing about a wood effect is that you can have the stylish look of wooden windows without the maintenance, and they should last longer.

While coloured double glazing is more expensive than white ones, it doesn’t have to break the bank. The best thing to do is get in touch with a range of window companies and ask them to come round to give you a quote. They should be able to offer you brochures or links to websites of different brands of windows that offer coloured frames. From there, you can decide on the installers you liked most and the brand you preferred.

It’s worth bearing in mind that it’s not always best to go with the cheapest coloured windows. While there lots of good, inexpensive options out there, sometimes very cheap windows won’t be good quality and may not last as long as other slightly more expensive brands. Speak to your installer about guarantees that may come with the windows and how long they would expect them to last before making your final decision.

The colours available will depend on the material of the door. Timber or aluminium doors can be painted to many different RAL colours. uPVC doors are generally available in fewer colours, but they can still be matched to many existing designs. A window and door company will be able to advise what optionas are available to suit your property.

If used and maintained properly, air conditioning can actually be a great way to create a healthier environment. As well as controlling the temperature, it also filters your air, removing pollutants like dust, pollen and mould particles.

However, to maximise these benefits, it’s important to keep your system clean. Dirty units and systems can become a health hazard, so always make sure you service your air conditioning at least once or twice a year.