Find a Shop Fitter you can trust in Stourbridge.

Do you notice your sink is taking ages to drain or perhaps you’re perceiving a funny smell oozing from it? You don’t have to panic as this is most definitely a blockage. Unblocking your drain requires just a little effort and chances are, you might not need to reach out to a professional. This blockage may be in your home’s internal or external drains but so far the the drain is within your property, it’s entirely your responsibility to make sure that they are well maintained and repaired (if the need arises).

Generally, outside drain problems are more likely to be harder to fix when compared to your average blocked sink. But it isn’t impossible should you have the relevant tools as well as knowledge. In this post, we’re going to consider a safe and effective approach to unblock a drain outside. Let’s take a look!

1. Pull the cover off the drain. This may require the use of a flat head screwdriver to remove the drain’s cover. If that isn’t working, you can try tying a rope around the cover to give you a good coverage
2. Identify the blockage. This is usually messy, but you simply have to do it if you wish to save some money. Simply reach down to remove as many of the blockage that you can reach as possible. This will make it easier for you to remove the rest with a drain rod
3. Use the drain rod. Simply put the drain rod inside and apply pressure. You’ll have to twist the rod in a clockwise direction to get into the blockage. Depending on how big or stubborn the drain is, it may take a while to get through it.

If you’re looking to acquire smart thermostats in your home, but wondering about its money saving qualities, then this is for you! Not only do smart thermostats add new impressive features to your home, but it can also save you both energy and money. According to many reports using a programmable thermostat can save you between the range of £130 to £150 on an annual basis. Now think about using a smart thermostat that makes it a lot more easier for you.

Wondering how smart thermostat save money? Simply set your smart thermostat one or two degrees lower or higher than the usual number. Once done, you’re likely to notice 1% to 3% reduction in your energy bills. And if you want even more, you simply increase the percentage to about 10 degrees to 15 degrees to cover the period you spend at work and watch as you save up to 10 percent of your energy bills.

Generally, a smart thermostats will save you money in two major ways. These includes:

• They Do All The Thinking For You

The smart thermostat watches your behaviour and study the time you’re at home and when you’re not as well as your preferred temperature at particular times in a day, and that’s why they are termed as “smart. they’ll automatically adjust the settings to ensure you get home to a perfect temperature.

• They Keep Tabs On Your Usage

You can always count on a two way communicating smart thermostat to watch your usage while also collecting the data and sharing it with you. It informs you of your energy usage rate as well as the estimated amount. Once you’ve been notified, you can manual adjustment or leave it to the thermostat to help manage your energy.

Soffits and fascias sit along the sides of your property, over the join between your walls and your roof. The fascia attaches to the end of your roof rafters, hiding and protecting them. The soffit fixes on the bottom of the fascia, bridging the gap between your fascia and wall. Your guttering attaches to the fascia, which also joins to the bargeboard on your gable end, if you have one.

Not necessarily. Commercial architects may charge either a fixed fee, an hourly rate, or a percentage of the building contract. They could also save you substantial amounts of money as their plans and drawings may stop issues arising later in the construction.

Network enabled/IP cameras are digital CCTV cameras. With these cameras, the video captured can be streamed over the internet anywhere in the world. Most manufacturers of IP cameras have a smartphone app that allows you to watch the video feed on your phone.

Are Solid Roof Conservatories Any Good?

If your old old glazed conservatory roof is starting to yield to the elements, perhaps it’s time to starting putting your money where your roof is. In recent times, most homeowners in the UK are now opting for the solid, tiled conservatory roofing alternative and for a good reason. If you’re also wondering if solid conservatories are of any good, then you’ve come to the right place! In the article, we’re going to discuss whether or not solid roof conservatories are a solid worthwhile investment and reasons for the stand.

Firstly, let’s look at what wrong with the normal conservatory roofs. Despite the fact that these are the cheaper alternative, it must however be said that they’re lacking in terms of insulation. A bad insulation can only mean discomfort all year round - winter will be cold and draughty and summer, stuffy and baking.

Solid roof conservatories, on the other hand, are made from special material that resembles traditional roof tiles but will only have a fraction of the weight. They’re able to deliver a much better insulation than a glazed roof which implies comfort all year round. What’s more? They’re very easy and quick to install, and as a result of their lightweight, you can easily transport them and use them for an underlying structure. The solid roof conservatories are a worthwhile investment which also provides the following advantages:

✓ It helps you save money. If they actually cost more, how can they save money? The solid roof conservatories provides many benefits but the most obvious one is improved insulation. And when a space is properly insulated, your heating bills will be significantly reduced. Hence, saving you some money.

✓ It also improves the safety of both you and your loved ones.

• Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
• Add a central step riser to stairs wider than 900mm to prevent them buckling
• Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth

• Step treads (the actual step themselves)
• Step risers
• Coach screws
• Deck screws
• Saw
• Drill

1. Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
2. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
3. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
4. After drilling pilot holes, screw the treads into the risers at each end with deck screws.
5. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.

Exterior painters and decorators will prepare the areas to be painted for you. This will involve washing and cleaning the area and making sure that it’s a good quality surface. Cracks or holes should be filled in. In some cases, you may wish to have rendering redone before the painting is done.