Find a Shop Fitter you can trust in Hassocks.

How Often To Service Boiler?

A boiler is a vital part of any home especially if you’re in the UK. Not only does provide your entire household with hot water and keep them warm but also adds a good value to your property. Boiler repairs and replacement are both super expensive and stressful, so in order to avoid all these worries, it’s better to have your boiler serviced on a regular basis for your own peace of mind. When you call in a reliable heating engineer, it can immensely raise your boiler’s efficiency while also saving you from more expensive issues down the road.

So if you haven’t had your boiler serviced for quite some time, moved into a new house and not aware the last time your boiler was serviced or perhaps you’re just wondering how often a boiler should be serviced, then you’ve come to the right place! The short and simple answer to this question is a boiler should should be serviced once in a year, and most preferably during the summer months. However, there are a wide range of factors that comes into play so it’s always advisable to check with your manufacturer before you proceed.

According to the law, you’re required to have your boiler services on an annual basis. Failure to do so can render your boiler or home warranty void. Therefore, it’s very crucial to take down the last time your boiler was serviced and also set a reminder to book your next appointment when the time closes in.

If you happen to own an electric boiler you may not need an annual servicing. But you may still be required to perform it annually by your insurance provider.

Why Do Roof Tiles Slip?

Despite being our first line of defence against the elements and covering the most valuable assets we possess, it’s shocking the reason why most roofs go unnoticed for years. However, when a damp patch suddenly appears on the ceiling or water starts to leak into our home, the condition of our roofing suddenly becomes of huge importance to homeowners.

In the UK, we get a fair share of harsh wind and heavy rainfall across the year which over time can lead to a plethora of roofing issues. One of the most obvious to identify is when roof tiles slip. If you’re also facing the same challenge, then you’ll most likely be interested in knowing the reason behind this occurrence. In this article, we’re going to take a look at some of the reasons why roof tiles slip.

Roof tiles can slip as a result of a corrosion of the nails that’s in place to secure your tiles to your roof. This happens especially during strong storms, whereby several roof tiles can be dislodged by rain and winds. If the affected tiles are just a few, then it may actually be a little issue to resolve. However, there are also times that the tiles slippage can be caused by a more serious issue. What’s more? You can also discover slipped roof tiles if the wood of your roof is corroded or weak. However, this applies a lot more to older homes than new or recent constructions. Any of the above reasons may be the main cause of your roof tiles slippage, but if you really want to know the exact cause for sure, you’ll have to call in a professional roof company to inspect your home.

Leaves, twigs and moss all have one thing in common which often annoys home and property owners - they are the three main materials that negatively impacts the proper functioning of a roof guttering system. The major cause of water drainage problems for most homes and buildings are these organic materials. Wondering how some leaves and few twigs can cause such a big problem? Over time there’ll be a gradual build up of the natural debris in your gutter system which starts to rot and turn  to a thick and muddy goo which obstructs the flow of water in your drainage. As a result, there’s the need to make sure that your gutters are thoroughly cleaned at least twice annually in order to prevent bigger issues that can be caused by the blockage of a drainage system.

So if you’re considering getting your gutters cleaned by a professional, you’d probably be interested in know just how it’s going to cost. Well, there’s not straightforward and simple answer to this question as there are a number of factors that contributes to the final cleaning cost of your gutters.

In general, in the UK, the average cost for cleaning of gutter is usually around £18 to about £25 per hour. However, you can also be quoted a day rate which is usually ranging between £150 to £200 per day.

The factors that can affect gutter cleaning price includes the type of your property (such as a terraced, end of terraced, detached and semi detached homes) which possesses a varying gutter cleaning price largely due to their size differences, the height of the building ( if you require the service for a property located on the second floor of a building, this would be a bit higher than if it were to be on the ground floor) as well as additional requests.

Installing a plasterboard on your ceiling is a cool way to modernize your property. Over the past couple of decades, there has bee an increasing number of trends associated with plastering of both walls and ceilings such as rounded edges and textured plaster. However, in recent times, home and property owners are now looking to install more of sharp edges. If you’re planning to plaster your ceiling, you’d probably want to know just how much this project is going to cost. If yes, then you’ve come to the right place. In this article, we’ll give you a rough estimate of ceiling plastering costs.

There are a plethora of factors the can influence the price of plastering your ceiling. These pricing components includes the following:

✓ Size. As you would have expected, the larger the job, the more the overall cost. However, the price per square metre will reduce which means that the cost of plastering a small ceiling space will cost more per square metre than the cost of plastering a larger ceiling space per square metre.

✓ Materials. We have a wide range of plasterboard available in the market. If you need a fire retardant, acoustic or other types of specialist plasterboard, you can expect to pay higher than standard plasterboards.

✓ Location. Just like many other home improvement projects, the cost of plastering ceiling varies greatly throughout the UK. Places such as London and the South East have the highest prices due to the high standard of living as well as greater demands.

In general, to plaster a ceiling (small 2 m x 2 m) - overboard and plaster will cost within the range of £200 to about £300. Also, to plaster a ceiling (large 5 m x 6 m) - overboard and plaster will cost within the range of £400 to about £600. The average plasterer’s daily rate (including material) is about £180 to £300 and ceiling plastering cost per square metre ranges between £20 to £40.

These days, buyers expect homes to have double glazing. People recognise the benefits of installing double glazing, so if you don’t have it installed you should consider it. You’ll increase your property’s value and give it a better chance of selling faster, since single glazed properties are also more likely to have problems with damp and mould which could put buyers off.

Scaffolding, also known as scaffold or staging, is an impermanent construction used to provide sustenance to a work crew and materials to help in the erection, upkeep and mending of structures, bridges and all other man-made constructions. Scaffolds are extensively used on site to get access to altitudes and parts that would be otherwise hard to get to. Hazardous scaffolding has the potential to result in demise or serious accidents. Another major use of scaffolding is in modified methods for formwork and shoring, concert stages, grandstand seating, access/viewing towers, ski ramps and art projects.

There are five main types of scaffolding today. These are Tube and Coupler (fitting) components, manufactured segmental system scaffold apparatuses, H-frame / facade modular system scaffolds, timber scaffolds and bamboo scaffolds.

Each type is made from numerous components which every so often include:

• A base plate or jack: It acts as the scaffold’s load-bearing base.

• The upright component with its connector joins.

• The ledger: The horizontal brace.

• The transom: It is a horizontal load-bearing component which helps to hold the batten or the decking unit.

• The brace diagonal.

• Cross-section bracing component

• The batten or the board decking component: On which the working platform is made.

• The coupler: A fitting which joins components together.

• The scaffold tie: It is used to tie in the scaffold to structures.

• The Brackets: It is used to extend the width of working platforms.

Particular machinery used to support in their usage as a provisional edifice often comprises of heavy-duty weight-bearing transoms, ladders or stairway units for the ingress and egress of the scaffold, beams ladder/unit types used to span obstacles and rubbish chutes used to eliminate undesirable constituents from the scaffold or construction development.

The European Standard, BS EN 12811-1, stipulates performance necessities and procedures of physical and universal design for access and working scaffolds. Requirements specified are for scaffold constructions that depend on the adjacent erections for steadiness.

An electrical safety inspection is basically the act of carrying out a thorough assessment of all electrical systems within a property, be it residential, commercial or industrial premises. The main goal of conducting this survey is to see to the fact that all the electrical systems and installations forming part of a property are correctly fitted, well maintained and ultimately, safe. This is required to be carried out by an electrician who’s an approved contractor and accredited by ECA, NICEIC or STROMA. To get contractors who can carry out the electrical safety inspection and meet with the government criteria, you simply have to search on the Electrical Component Person database. They’ll assess the current condition of the electrical systems and evaluate if they are working efficiently while also paying special attention to any defects or faults.

Generally, the best way to get an electrical safety certificate ( an EICR) is to shop around. In the event whereby you need the inspector to examine a part of your property you’d have to raise his/her awareness to this. This will be referred to as an “agreed limitation in the report.

Failure to comply with electrical safety regulations bring about serious penalties for such landlords. Upon the introduction of the new regulations in June 2020, local authorities can fine the electrical safety regulations-breaching landlords up to £30,000. Asides this fact, it’s also in your interest to keep your property as well as its appliances in a good condition at all times. If everyone including your tenants feel safe and your property is in great shape, everyone is happy!

The cost of an Electrical Certificate varies depending on the size of your home as well as the number of electrical installations and appliances that needs to be checked. The price can start anywhere from £120 and above.

What Is The Most Secure Type Of Front Door?

When getting a new front door for your home or property, you’d probably want to get one that’ll provide the most security for your home. Gone are the days when you could leave your front door open and still come back to your assets intact, if you try that today, you’ll be taught a bitter lesson. The front door is the weak point of your home, the point at which several burglars will use to gain entrance into your home. Therefore, for your own peace of mind, there’s the need to get the most secure type of front door to protect both your loved ones and home.

There are two crucial thing to take into account when selecting the best front door for your home’s security and these includes both the door’s material as well as the lock. Let’s have a look at two of the best front doors for security purposes.

✓ Timber Doors. Though they might look great, but they’re also very sturdy and solid which makes them one the best front doors for security. Timber is a heavy hardwood door that’s at least 44mm thick. However, just like any other door type, the strength still boils down to the frame as well as quality of the lock. If the timber door possesses a superior style lock alongside a solid frame, only burglars or intruders with a leg to spare will try to forcefully kick it in. And neither can it be smashed open nor shoved with the shoulder.

✓ Composite Doors. These doors are developed to tackle the flaws of singular material doors and as a result, they possess great security qualities. They usually include a steel door frame and a solid hardwood internal frame. Furthermore, the door’s surface skin is typically made from glass-reinforced plastic which is a very sturdy material. Combination of all these materials enable this type of door to withstand brute force with relative ease. No intruder with a good knowledge of door materials will try to force an entry with a composite door standing as an obstacle.