Find a Shop Fitter you can trust in Cricklade.

If you choose to install an LPG boiler, you’ll need to find an LPG supplier. They’ll deliver fuel to you every time your storage tank runs low. You can even rent a storage tank from them if you don’t want to buy one. Make sure you know who your local suppliers are and where they are based.

If your boiler is leaking, there are some checks that you can do yourself. However, you should never attempt to repair your boiler yourself – only a Gas Safe-registered engineer should conduct repairs.

There are 3 main reasons why your boiler might be leaking: there’s a pressure valve fault, a temperature valve leak or corrosion in the system. An engineer will be able to spot the problem quickly, but in the meantime there are a few things you can do:

Check the pipe fittings

If your boiler is leaking water around the pipe fittings, it could be an installation fault and you should get in touch with the engineer that fitted it. You can check the pipe fittings by drying the area then waiting to see if the water appears again. If it does, you may be able to do a ¼ turn of the pipe to stop it. However, you should still call the engineer that installed it to ask them to check the PTFE tape on the inside.

Inspect the seals

Over time, the rubber seals on a boiler can start to perish, so if you have an old boiler this could be the source of your leak. If you have a new boiler, it could be caused by your boiler running over pressure.

Heat exchanger corrosion

Unfortunately, if a boiler engineer discovers that the boiler is leaking water from the heat exchanger, this is the end of the road for your system. The heat exchanger is the most expensive part of your boiler, so it makes more financial sense to replace your boiler with a newer, more efficient model rather than try to replace it.

As the name suggests, these are air conditioning units that are specifically designed to be installed indoors. Unlike the conventional air conditioning system which involves installing a rather unattractive box on the outside of the building, internal air conditioning units are full fledged AC system which doesn’t involve having to make penetrations through the external walls. This could be as a result of the weather proof nature of the building or any other exterior skin features which acts as a restriction and makes the installation of a traditional air conditioning unit on the outside of your building simply illogical.

So how exactly does internal air conditioning units work? Well, most systems features the following components:

• The fan coil or room unit which is retrofitted high up on the interior wall of the room in question. Although, it can also be fitted into existing fittings as a concealed ducted unit during a refurbishment which makes it look a lot more attractive than the first option.
• The refrigeration pipe work then runs from the unit hidden behind the walls or ceilings, to the condenser box. The condenser box is usually the part that goes outside. However, it’s still installed inside the systems, mostly in a concealed space such as under the kitchen counter.

The benefits of installing internal air conditioning systems include the following:

• They are smart systems which is fully controllable with WiFi
• They filter the air, sucking dust, pollutants as well as other allergens from your building
• They most possesses some exciting features like the blackout technology as well as the i-Feel temperature control
• They’re just as effective in cooling and dehumidifying as any traditional air conditioning system.

With the ability to add approximately one third of your existing living space ( by converting your old, unused attic) to your home or property without having to let go of your garden, it’s quite easy to see the reason why loft conversion has rapidly grown to become one of the most popular home improvements in the UK. However some homeowners usually shy away from the idea simply by looking at the perceived high cost of carrying out such a project, despite several researches showing that loft conversions offers the best rate of return on initial investment when compared to the other home improvement projects. So exactly how much would it cost to carry out this project?

Just like several other home improvement projects, the cost of a loft conversion varies greatly depending on a wide range of influencing factors. These factors include the size of your home, how old your home is as well as the quality of the fixtures and fittings you want to install. For instance, a high end bathtub alone can cost you thousands of pounds, meanwhile you can also construct a full bathroom suite on just a couple of hundred pounds. However, to give you an idea of the minimum cost of a loft project we’ll look at the most popular types and the minimum cost of each.

✓ Internal Loft Conversion - The most affordable type of loft conversion tends to start from £25,000 and above.

✓ Dormer or L-Shaped Dormer Loft Conversion. These are the most popular types of loft conversion. Dormer price tends to start from £35,000, while the L-shaped dormer starts from £45,000.

✓ Mansard Loft Conversion - This involves replacing the entire side of a sloping roof with a vertical wall and flat roof. It requires a planning permission. The type of loft conversion usually starts from £45,000.

✓ Hip To Gable Loft Conversion - This usually starts from £50,000.

Tar and gravel flat roofs are popular because the gravel weighs down the surface of the roof so it doesn’t blow away and it also protects it from sun damage. The tar makes the roof watertight, so you won’t get any leaks. However, sometimes problems occur and you’ll get cracks and leaks. So how do you repair a tar and gravel flat roof?

If you notice leaking coming through your flat roof, try to find the source of the leak. Since water can travel easily, it might not be where you think it is. The first place to check is the flashing, then any parts of the roof with gravel missing. Once you’ve found the crack, sweep away any remaining gravel and clean the area.

Apply a primer to the area and allow it to dry. Then, apply a tar and gravel roof patch that you can get from most DIY shops. Patch 2-3 inches around the damaged area, creating layers, and ensuring that there aren’t any air bubbles or gaps. Then you should cover the entire patch with gravel.

Before you try to repair a tar and gravel flat roof yourself, consider how much of the roof needs repairing. Professionals often say that if cracks and faults make up 25% or more of the roof, then you should look to replace it. It might be tempting to try and replace your tar and gravel roof yourself, but it’s best left to the specialists. They will ensure that your new roof is watertight and strong enough to withstand sun damage and storms.

Have you being considering the options available to you for removing the conifers around your home? Or perhaps you’re just planning to raise some structures in an area where you have lots of conifer trees. Regardless of your reason for wanting to remove a conifer tree, you’ve come to the right place!

There are multiple options to remove a conifer tree based on the one that best suits your needs. Some individuals are okay with felling the tree and leaving the stumps behind, while others don’t just want both the tree and the stumps so they poison the tree and subject the stumps to a quick rotting process.

lThe Physical Method

This basically involves felling the trees with the help of powerful machines and other tools. Let’s take a look!

• Early preparation. Get your chainsaw ready alongside your pruning tools as well as other equipments that can prove to be useful.

• Determine the direction you want the tree to fall. You must ensure there’s no passerby risk or risk of damage to any property whatsoever.

• Cut down the trunk. Put your chainsaw to use. First cut doen the branches and twigs before felling the tree.

• Choose your cutting technique depending on the tree’s size, slope and chainsaw available.

• Check for possible infestation before removing the conifer tree.

• Remove the conifer stumps by grinding the stumps out (use a grinder) and setting fire to consume the stumps.

lThe Chemical Method

To carry out this process, you need to first cut down the large tree branches using a chainsaw. Once done, cut off a portion around the circumference of the trunk below the lower branches, close to the root. Leave the bark’s strips connected to the conifer tree to expose the inner tissue.

Mix the chemicals and apply into the conifer tree directly until the whole surface is covered. This will make the conifer tree to die off gradually for a couple of weeks.

Many conservatories fall under permitted development which means they don’t require planning permission. There are exceptions to this though, especially if you’re looking to have a large conservatory installed. Read our guide on conservatory planning permission for more information.

Most conservatories won’t require Building Regulations approval. However, if you’re planning a conservatory more than 30 square metres in floor space this may be required. If there is no linking door between the home and conservatory then Buildings Regulations approval will be needed too. For more information and to ensure getting everything right, speak to the local council or planning officer.