Find a Shop Fitter you can trust in Salisbury.

Adding a lean to conservatory to your home or property comes with a whole lot of benefits. It provides you with the much needed additional living space within your property, add value to your home and creates a link between your home and garden. As advantageous as it is, one of the major concerns several homeowners have is whether or not is requires a planning permission. This is a crucial question that must be answered before you make financial commitment to the project. If you don’t know what you’re doing the entire process can be very tedious and you definitely do not want to go through the stress of completing your remarkable new conservatory, only to be instructed to have it removed again. In this post, we’re going to consider if obtaining a planning permission is required before adding a lean to conservatory to your property.

Generally, adding a lean to conservatory to a property is considered to be a “Permitted Development, which implies that you won’t have to apply for a planning permission to complete the project without any risk of interruption from the appropriate authorities. However, there certain circumstance that’ll require a planning permission. These circumstances include:

• If the conservatory covers more than 50 percent of the land around the main house.
• If the conservatory will be placed on the side of the house that faces the road.
• If the conservatory will be higher than the highest point of the main building’s roof.
• If the main building is lower than the height of the eaves and ridge.
• If the conservatory will be constructed to the side of the house and more than a single storey or it goes higher than 4 metres.
• If the conservatory will be wider than the width of the main building, if it’s to be built beside it.
• If the conservatory will be constructed at the rear and higher than 4 metres.

How To Fit Plasterboard

If you’re planning to renovate your house, then here is a must-read guide! Fitting of plasterboard is a crucial step when it comes to renovation. If you’re bringing down an existing lath and plaster for an upgraded surface or adding a new wall, a plasterboard is required for your project to be a true success. If you’re a novice with no prior practice or experience, you can protect your investment by hiring the services of a professional plasterer to guarantee the best results, the first time. However, we’ve put together this guide to give you an insight on how the plasterboard fitting process is done.

To get started, you’ll need a power drill, hammer, plasterboard nails or screws, broad knife, utility knife, measurement tape, pencil, ladder as well as a joint tape.

Before proceeding, you need to identify the number of plasterboard sheets needed to commence the project by measuring the height and width of the wall as well as calculating the square footage. If you possess a stud timber wall, the steps below will get you the best results.

• Measure the walls and mark the plasterboard where you’ll make the cuts. Start with a full sheet and cut pieces down in such a way that would fit

• Score the front paper of the plasterboard with utility knife. Fold the sheet to get a clean cut through the board and make use of the knife to the remaining paper.

• Place the first sheet against the wall and use an offcut to prevent the plasterboard from touch the floor.

• Make the plasterboard rest snugly against the wall in position and screw it firmly on each stud. Once done, fasten it at all the sheets’ edges and in a line down the stud to make for a firm connection. Follow the same process for the remaining plasterboard sheet till the wall is fully covered.

.Typically, quantity surveying involves the calculating and management of the costs relating to projects, starting with assisting with the initial estimates to finalizing the overall requirements of the budget. Quantity surveyors normally work in land management, property as well as construction industries. Generally, quantity surveyors are usually engaged at the start of a project, consulted and brought in to take a look at a planned construction’s feasibility or repair needs, they then subsequently supervise the remaining activities during the capital expenditure phases of the project development. In other words, they’re often involved on the site up until the completion of the construction project helping to monitor both the forecasted and actual expenses while also being required to quickly determine the best line of action to take to deal with problems  as well as changes in specifications with updated costings and feasibility reviews.

As a quantity surveyor, you’ll be required to perform a series of roles on a daily basis. This may involved having to work in an office in one day and the next, you’d probably find yourself on a construction site meeting with clients or consulting with a construction personnel. Each project is unique as there’s always a great deal of variety which can be not the most pleasant activity especially for someone who doesn’t like routine works. On a daily basis, quantity surveying normally involves preparing tender and contract documents, carrying out analysis, monitoring costs variation and preparing reports, determining the client’s requirements and taking on feasibility studies, distributing work to sub contractors as well as making the necessary payments. Apart from all the aforementioned, site visits also represents a big part of quantity surveying as you’re required to make assessments on the financial projections for the future activities.

It is crucial to make the walls of your bathroom waterproof, and bathroom wall panels or bathroom cladding is not only a great way to do that, but its also the easiest way to update the look of your bathroom. When it comes to adding wall panels to your bathroom, there are a large selection of designs to choose from which means you’ll always find something that’ll suit your space. So how do you have them installed? With this brief guide, you’ll learn everything you need to know about the bathroom panels installation. Let’s have a look!

1. Get the right tools and supplies. You’ll require a handsaw, jigsaw, or circular saw, hacksaw, drill, hammer, 1200mm spirit level, sealant gun, suction cups and tape measure.
2. Prepare the bathroom. Ensure that the bathroom walls are degreased, clean and, dust and dirt free. Also make sure that its flat and even with a spirit level.
3. Make sure a fixing method is in place. If not, make use of treated battens as a fixing method. Fit all battens in such a way that’s plumb and parallel.
4. Fit the shower tray. Take a measurement of the shower tray to identify the length of the seal strips that is needed while also making room for the shower screen.
5. Add the seal strips.
6. Cut the panels to size. Mark the bathroom wall panels and cut to get the right measurement in both height and width. Also ensure to make room for pipe and shower head holes at this point.
7. Install the panels.

Satellite TV is a service that provides its customers with a wide range of TV channels by transmitting signals from a communications satellite. Users around the world can pick it up using a satellite dish mounted on their property and connected to their TV. Satellite TV is particularly useful for viewers who live out of aerial and cable TV range in remote areas.

Finding a builder nearby can have enormous assistance when it comes to your build. Period on site, their familiarity of local planning permission, constructors’ dealers and other local trades are all vital bits of knowledge that you’ll welcome on site.

It is always wise to walk around in your local area or drive to a site where any construction work is going on. It’ll give you a proper impression of the constructors who are active nearby. You don’t have to like their style of work or the project they are currently carrying out – after all, a builder can only produce what’s on the plans in front of them.

Find a Builder Other Tradesmen Recommend

If you’ve had to call an electrician before or a local plumber and liked their work, you can always ask them if they have any builders whom they would recommend. Maximum tradesmen get used to seeing the similar acquainted names from one place to another in the sites they are working on and every so often has favourites for who they like to work with — and who they see as a good source of work.

Always Talk to Previous Customers

Once you’ve found a builder you would like to work with, ask them for a list of previous customers they have worked with; they ought to be glad to offer particulars if they’re self-assured they’ve done an effective job.

Look for a builder online

A decent place to start looking for builders online is on sites like the ours so that you can find quality tradespeople and see genuine reviews from previous customers. Not all online review sites can be trusted to display real reviews.

How Much Is A Metal Front Door?

If you’re looking to get a front door, one of the things you’d want to consider before you proceed is the price of getting the door. As an exterior door, you’ll need something that’s close against weather as well as intrusion. And that’s exactly where steel comes in! It’s a popular choice for exterior door material due to the numerous qualities it possesses. However, the single and precise cost to get a metal front door can not be provided as it depends on a wide array of factors.

The cost to install an average metal front door will depend on the material and finish grade, structural preparation, size, unique needs, labour rate and lots more. Other things you’d have to put into consideration includes the following:

✓ A project to replace more than 2 doors are more likely to enjoy a unit price or bulk discount.

✓ During inspection to replace the existing door with a metal one, there may be some repair concerns like rot and also a need to adapt the existing door opening structure which will also tell on the price

✓ There may be local or national subsidy for energy efficiency improvements.

✓ Taxes and permit fees may also be applicable.

✓ DIY considerations. This project may be suitable for a DIYer with carpentry skills. So if you wish to carry out the installation by yourself that’ll also help you save some money.

Generally, the cost of a metal front door will range between £100 to about £10,000. However, before you purchase a steel door it’s very important to put into consideration what the door is being used for as well as what you’d prioritize between beauty and security - although, most steel doors can offer both at an affordable price.

What Insurance Does A Painter Need?

As a painter, you’re most likely going to require three forms of insurance which includes public liability, income protection as well as tool insurance. However, you should take note that outside these three, there are also several other forms of insurance whose relevance will only be determined by the nature of your business. Now let’s take a closer look into the three most important forms of insurance for painters.

✓ Public liability. What’s surprising here is the fact that many painters are actually aware that they should have a public liability insurance, but only a few really knows what it actually covers. Essentially, what a public liability insurance does is to protect you in the event whereby you messed up and some else suffers a loss as a result of your actions. Third parties can suffer a property damage or personal injury as a result of your negligence. It does not in any way cover the damages to your own property or injuries suffered by you or your staff.

✓ Income protection. As a subcontractor or self employed painter, you’ll be in the best position to know that if you don’t work, there’ll be no money for you. And with no sick leave and possibly no workers’ compensation, then financial problem looms. But not to worry, you can protect yourself from this risk by getting an income protection insurance.

✓ Tool insurance. It’s always a terrible feeling when you go to the site only to discover your tools such as ladders, spray guns, trestles and equipment are suddenly no where to be found. Upon discovery of this situation, you’ll start thinking about the cost of replacing all the tools. With a tool insurance, you can be protected against these sort of situations whereby your tools are stolen, damaged and lots more.