Damp Proofing in Glyncoch
Extensions including garage conversions will typically require supplementary damp proofing to be added during the conversion, as the existing garage normally has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing should be put into walls and floors. Additionally, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will usually be performed by by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might have to be improved as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting slowly as moisture sets in. This can be carried out by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion should adhere to, therefore is it necessary to ensure that your garage conversion incorporates appropriate damp proofing methods.