Damp Proofing in Kendal
Extensions such as garage conversions will usually require extra damp proofing to be added through the conversion, as the pre-existing garage routinely has a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing should be added to walls and floors. Furthermore, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this might have to be updated as part of the conversion to be able to meet current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This is done by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion should adhere to, and so is it important to make sure that your garage conversion makes use of suitable damp proofing methods.
