Damp Proofing in Neath
Extensions including garage conversions will usually require extra damp proofing to be added as part of conversion, as the pre-existing garage will typically have a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. In addition, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will usually be achieved by utilising a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might need to be updated as part of the conversion in order to comply with current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be performed by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to comply with, therefore is it vital to make sure that your garage conversion incorporates suitable damp proofing methods.