Damp Proofing in Portstewart
Extensions such as garage conversions will typically require supplementary damp proofing to be installed through the conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Additionally, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will in most cases be performed by by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this may need to be improved as part of the conversion in order to comply with current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is carried out by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, and so is it necessary to make sure that your garage conversion makes use of suitable damp proofing methods.