Do you want a plasterer within Pershore and wish to locate the best prices? Then compare and contrast prices from respected contractors with our easy and quick service available to you at no cost.
Plastering is extremely popular in British homes because it's a fast and effective way to restore walls so they're suited to wallpaper, tiling or painting. It's this ease of decoration later on which makes plastering a must.
How many times have you taken off wallpaper to find the walls beneath are uneven or there's damage that requires restoring. Plastering will take only a few hours and when it has dried out you could start decorating.
If you'd like your home replastered then make use of our free online service and receive around four prices to compare in Pershore.
The regular cost of Plastering is £750. Costs fluctuate based on the materials and the firm hired. The upper price range can be as high as £862.5. The material costs are typically about £187.5
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£1000
£750
£500
£250
£0
| Labour cost | £525 | |
| Material cost | £188 | |
| Waste removal | £38 |
Searches that showed one of our pages for Pershore, all services
Pershore is a market town in Worcestershire, England, on the banks of the River Avon. Pershore remains in the Wychavon area and also is part of the West Worcestershire legislative constituency. At the 2011 census the population was 7,125. The community is best recognized for Pershore Abbey, Pershore University (currently a school of Warwickshire College), as well as the plums and pears expanded in your area. Pershore is situated on the River Avon, 6 miles west of Evesham as well as 6 miles east of Upton-upon-Severn in the Vale of Evesham, an area rich in fruit and vegetable manufacturing The town lies near the A44 midway from Worcester to Evesham. The nearby motorway junctions are junction 7 of the M5 (South Worcester) or junction 1 of the M50. There is a train station on the Cotswold Line, enabling straight traveling to Paddington station, London, using Evesham, Moreton-in-Marsh, Oxford, Didcot as well as Reading, although Pershore station is more than a mile from the centre of the community towards Pinvin.
WKB Plastering are a small and friendly family-run business that work across Gloucestershire and surrounding areas. Headed up by Warren, he and his team pride themselves on providing a high quality, clean, professional and reliable service. Undertaki...
Good response from this firm
Tewkesbury - GL20
Enquiry from: Jim G
Start Date: Immediate
We have hairline cracks in walls and ceilings mainly in hall and lounge and some elsewhere which we would like repaired ready for painting
Redditch - B98
Enquiry from: Gulshan M
Start Date: Immediate
Skimming an plastering bedroom an stair wall to make them level
Worcester - WR3
Enquiry from: Liam M
Start Date: Immediate
Coving to ground floor including lounge dining room kitchen and hallway
Answer a few quick questions, so we can match you with local plasterers who can help.
Get free, no-obligation local plastering quotes from 4 verified plasterers working in Pershore.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
It's always difficult finding a tradesman that comes recommended so having a recommendation service solves this problem
good service
this is the first time I have used this service and found it easy and cost effective
Plastering is suitable to cover most Artex. If it’s shallow Artex, it may be covered by skimming plaster on top. If the pattern of the Artex is too deep, you may need to use plasterboard to cover it or if you want to remove it entirely, you will need to use a wallpaper steamer.
There are several different kinds of plastering. ‘Dot and dab’ refers to a base layer of plasterboard which is attached to a wall using ‘dabs’ of adhesive. ‘Floating’ is a technique where a backing or undercoat plaster is applied to walls. ‘Skimming’ or ‘reskimming’ refers to the very thin final decorative layer of plaster.
Can You Plaster Over Artex?
The short and simple answer to this question is yes, you can plaster over Artex. However, you must also note that plastering over Artex may not be the best choice as Artex is porous and as such, you’d have to detach the stripping so as to get a smooth and even coating. In the event whereby your ceilings or walls have Artex on them, you’ll have to smooth the Artex in order to obtain a plaster of solid coat.
✓ Preparing Artex for plastering. First and foremost, you’ll have to detach any bumps before you can plaster over the Artex. Do note that you don’t have to completely remove the Artex, all that’s needed is just enough to get a coat of plaster. Make use of a scraper to get rid of the bumps on various Artex designs like swirl and bark. Once you’re through getting rid of as much bumps as possible, there’s the need to seal the Artex due to the fact that it can absorb the moisture out of the plaster which will cut the time to get a good finish to little or nothing. You can use a PVA and water mix to do the job!
✓ The PVA mix. This is done to seal off the porous Artex in order to stop it from absorbing moisture from your plaster which can make it start to crack and crumble. To do this, simply mix half PVA and half water, then use a brush to paint the mixture over the plastering area. Once done, you can give the plastering surface about two to three coats and wait for the solution to dry off within a hour or two.
Plastering over Artex is not as hard as it seems, but if you lack the confidence to complete the task, simply contact a professional for help.
Can You Plaster Over Tiles?
Yes, it’s absolutely possible to plaster over tiles but just because is possible doesn’t mean you should. Plastering over tiles is an option but it’s not recommended by experts due to several reasons. A good example is the fact that a tiled environment is in no way a suitable environment that can serve as a good bonding surface for a plaster. For the success of a plastering project, there’s the need for the surface to be able to bond to the PVA base coat. Due to fact that most tiles are slippery in nature and also lack of the ability to be able to absorb moisture, the PVA base coat layer will not be able to bond to the tiled surface, which will ultimately make for a weak surface upon the application of the plaster. Consequently, the plaster will easily flake and fall from the wall.
The inability to drill into the tiled wall surface after plastering is one of the major disadvantages that also arises when you decide to plaster over tiled surfaces. Most tiled surfaces are found in kitchens and bathrooms which are going to need appliances such as sinks, lavatories, kitchen counters and lots more. These appliances are designed to be installed on solid surfaces which would not be an easy task to carry out on tiles knowing there would definitely be great cracks or damages.
The best tip you’ll get if you’re considering to plaster on a tiled surface, is that detaching tiles from a surface can easily be done with a hammer and chisel, and that would save you a host of problems later in the future. However, if you still wish to plaster on your tiled walls, then you best bet would be to get a Blue Grit bonding agent. It works better than PVA and only needs one coat.
We can help you get more plastering work with our qualified job leads and boost your business.
Join today