Question 1

Can solar panels cause fires?

Accepted Answer

It’s only likely that solar panels will cause fires if they are installed incorrectly. The safest thing to do is ask an MCS-registered engineer to install your panels as they have all the relevant qualifications and training in handling electricity. If you choose a reputable company that can prove they have the right certifications, it’s highly unlikely that your solar panels will cause a fire. It’s important to remember that solar PV panels can’t start a fire themselves. It’s other parts that could become faulty that would then lead to a fire. For example, if the connectors in the system aren’t seamed properly, it could cause arcing and overheating, which could then cause the panels to set alight. Another possibility is that the junction box overheats and starts a fire. The junction box is found on the rear side of the solar panel and enables the electrical connection via a connector. Of course, since solar panels harness electricity, there is always a small fire risk – just like there is with any electrical appliance in your home. But there are some precautions you can take to reduce your risk of fire from solar panels: Don’t buy cheap solar panels – while it might seem tempting, make sure you choose MCS-certified solar panels. Any reputable installer will recommend high quality solar panels, which is another reason to have them professionally installed rather than doing it yourself. Ensure that your installer uses non-combustible mounting systems and frames. Check your system regularly for signs of pests gnawing through cables. Keep your solar panel system regularly maintained with proper testing and servicing carried out as recommended by your installer. If something doesn’t look right to you, get in touch with your installer and ask – they should be more than happy to help.

Question 2

How much do solar panels cost?

Accepted Answer

The cost of solar panels has reduced significantly over the years. While a system may have cost you up to £20,000 in the early days, that’s not the case anymore. So how much do solar panels cost today? The cost of an average 4kW system on an average home will set you back between £4,500-6,500. But pair that with the savings on your electricity bills and payments that you can receive from the Smart Export Guarantee (SEG), the net cost could be much less. The SEG is a payment from your energy supplier for any electricity that you don’t use and send back to the grid. Each energy supplier can set their own rate, but it must be above zero at all times. This replaces the Feed-in Tariff Scheme (FITs) which used to pay solar panel owners per kW of electricity they generated as well as that which they sent back to the grid. This was a much more lucrative scheme which saw homeowners earn back the cost of their system within a few years, but it ended in March 2019. Now, with the SEG and your savings on your electricity bills, you could save up to £330 a year – meaning you could break even within 14 years. Solar panel systems are likely to last up to 25 years, so they’re still well worth investing in. Combine that with the saving of 1.29 tonnes of carbon dioxide every year, and you’ve done your bit for the environment.

Question 3

How do I test my solar panel?

Accepted Answer

If you want to test your solar panel system to see if it’s working properly or just to see what output it’s giving, you can do this using a multimeter to measure current, or amps, and voltage.

Before you start, you’ll need to find the voltage (v) and current (A) ratings of your panel. You should be able to find them on the back of the panel. You should also make sure that it’s a nice clear, sunny day to get the best readings out of your panel. You should also check that it’s safe to be up on your roof!

To measure open circuit voltage, you’ll need to make sure that your solar panel is completely disconnected from your system’s regulator and battery (if you have one). Angle the panel towards the sun, and ensure that your multimeter is set to measure volts. Measure the voltage between the positive and negative terminals by connecting the negative contact on the voltmeter to the negative on the panel and the positive contact on the voltmeter to the positive on the panel.

Then, you can move on to the short circuit current. Follow the same steps as the open circuit voltage, but ensure that your multimeter is set at 10A to start with.

Only try to test your solar panel if it’s safe to do so. If your roof isn’t accessible without scaffolding or specialist equipment, consider speaking to an MCS-registered solar company about your concerns. They may recommend that they come to service your solar panel system.

Question 4

Is it best to get solar panels installed by a professional?

Accepted Answer

Yes. It will always be best to get solar panels installed by a professional because they have gone through lots of training and have all the relevant qualifications to install solar panels correctly. Whenever you’re dealing with electricity, if something goes wrong it could cause a fire or you could electrocute yourself, so it’s always worth leaving it to the professionals. The other thing to bear in mind is that it’s best to get solar panels installed by a professional, MCS-registered engineer so you’re eligible for Smart Export Guarantee (SEG) payments. The SEG is a government-backed scheme where your energy supplier pays you for each unit of electricity you send back to the grid. Each supplier can set their own rate, but it must be above zero at all times, even if wholesale electricity prices dip below zero. According to the Energy Saving Trust, if you’re at home all day and live in the South East, combine the savings on your electricity bills with your SEG payments and you could save up to £330 a year, meaning the system could pay for itself within 16 years. If you don’t use an MCS-registered company to install your solar panels, you won’t be able to claim the SEG. It’s also unlikely that you’d be able to claim payments for any other schemes that may become available in the future, so it’s always best to leave your solar panel installation to the professionals.

Avg. price low	Avg. price low £2,600
Avg. price	Avg. price £3,250
Avg. price high	Avg. price high £4,875

	Material cost	£3,200
	Waste removal	£50

Solar Electricity (Supply-only) in Argyll

Request Solar Electricity (Supply-only) Prices in Argyll

Average Supply-only solar electricity cost in Argyll

Average price per Supply-only solar electricity job in 2026

Supply-only solar electricity installation cost in Argyll 2026

Supply-only solar electricity on Google in Argyll

Google searches that showed Local Quotes, 17 July to 14 October 2026

3,373

Supply-only solar electricity near you

Argyll

Looking for Supply-only solar electricity in Argyll?

Get free quotes from local solar panel installers

Local & reliable solar panel installers near me

Tell us about your supply-only solar electricity project

Find up to 4 solar panel installers in Argyll

Hire with confidence

Our reviews

Average

Very good company ranks the pressur ...

Very professional service and very ...

Very helpful and responsive. Instal ...

FAQs

Other Top Projects in Argyll

Customer Reviews

Need more help?

Are you a solar panel installer in Argyll?