Find an Air Conditioning Engineer you can trust in Brampton.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

As the heat start to come up especially during the summer months, the swelter will mercifully be kept in check by air conditioning. The technology has made a significant impact on modern life and it can now be considered a norm for all new and modern homes. So if you’re also planning to fit new HVAC air conditioning systems in your home or property, you may also be interested in knowing exactly how it works. In this article, we aim to provide you with an in depth insight into how air conditioning operates. Now let’s take a closer look at the process!

✓ A grille at the bottom of the machine absorbs warm air from the room

✓ The warm air is transmitted over some chiller pipes through which a coolant fluid is circulating. Working in a similar fashion as the chiller cabinet in a refrigerator, this part cools down the transmitted warm air and any excess moisture is duly removed by a dehumidifier.

✓ The air is then transmitted over a heating element which is quite similar to the one present in a fan heater. On a cold day, this part of the unit can be turned up in order to allow the HVAC works as heater.

✓ A fan which is positioned at the top blows the air back through another grilled into the room.

✓ Coolant flows through the the chiller pipes. In the process, it carries heat from the air blowing past the pipes and then it evaporates - converting the cool liquid into a hotter gas. This heat is then transported to the outside of the building from inside the room.

✓ With time, the heat inside the building slowly blows away into the outside air.

NO - as air conditioning systems use fluorinated gases as refrigerants, all work on them must be done by professionals holding valid F-Gas certification. There is a range of different qualifications and certifications that apply for this, so it's always best to ask someone who is qualified to do this.

Air conditioning filters work mainly to collect dust from the air and as such, tends to get dirty pretty often with all sorts of materials such as hair fibres, pollen and more. If you have a large office, this gets even more important as more air circulates through your air conditioning system. Failure to change your office air conditioning filters when due can bring about of challenges not only to the system itself, but also to the health of the individual making use of the space especially those suffering from asthma or allergies (due to the reduction in air quality). So if you happen to have an air conditioning system in your office, you should probably find out how often it’s recommended to change the filters and that’s exactly why we’re here. Let’s take a look!

In the summer when the heat turns up there’s a huge need to change the office air filters on a regular basis ( at least once a month). This is due to the fact that your air conditioning system works extra hard and runs all the time during the warmer months. However, during the period when there’s a cool temperature, the air conditioning filter can be changed every 2 months as the unit wouldn’t be subjected to frequent usage during this period. What’s more? If you happen to have pets, a large family or live with an individual who suffers from asthma or allergies, it becomes a lot more important to change your air filters. Plus, a dirty filter is capable of increasing your energy cost within the range of 5 to 15 percent on a monthly basis.

There are a range of air conditioning units on the market. You should be sure to choose one with the appropriate cooling output for the room where it will be placed. Professional air conditioning companies will be able to advise you of the most suitable units for your rooms.

If you’re looking to purchase and install an air conditioning system in your home or property, what immediately comes to mind is the type to invest in. When it comes to air conditioners, the available choices are numerous - from window units to central air conditioning, through-the-wall air conditioners, portable air conditioners, ductless split system, package terminal air conditioners, swamp coolers as well as geothermal cooling systems. In this post, we’re going to consider the various type of air conditioners in order to help you make the best decision moving forward. Let’s take a look!

• Window air conditioners. These are the most popular type of air conditioners which are typically mounted in a window. They possess an exhaust system which pushes hot air out the back and sides while the refrigerant cooling is pointed indoors.
• Central air conditioning. This is the most effective form of air conditioning if you happen to own a large home and want all rooms cooled at once.
• Portable air conditioners. Just like window air conditioners, these are self-contained air conditioning systems. In other words, portable air conditioners have all their essential components in one appliance just like in window air conditioning units.
• Through-the-wall air conditioners. These self-contained units that operates by bringing in warm air which is then exhausted while they send cool air back into the room ( similar to window air conditioners).
• Ductless split system air conditioners. Just like the name suggests, these are two-part air conditioners that are able to cool various areas within a home.
• Package terminal air conditioners. These are the type of air conditioners that are mostly used for cooling in commercial spaces like hospitals, hotels and the likes.
• Evaporative or “swamp” coolers. Although these aren’t as common as refrigerant air conditioners but they are just as effective. While conventional air conditioners make use of a refrigerant known as Freon, swamp coolers only incorporates air and water to function.

Most air conditioning units will need yearly maintenance. This will involve a full service and cleaning of filters. In very dusty areas units may need more frequent maintenance. Regular servicing will extend the life of an air conditioning unit. Keep a record of when this is done so you know when to contact someone!