Find an Air Conditioning Engineer you can trust in Rossendale.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

Conservatories are a very popular structure in the UK, however one of their major setbacks is the fact that they can easily overheat or get too cold. This is something all conservatory owners in the UK can relate with as it often gets too hot during the warmer months and can also easily get too cold during the winter months. As a result of this, there’s a need for good calculations to be carried out by a professional surveyor to ensure that enough cooling power is recommended. If you own a conservatory and you’re thinking about installing a heating and cooling system to make the space very comfortable and relaxing, then you’d probably want to know what the best conservatory air conditioning system is. In this post, we aim to give you an in depth insight into this to help make sure you make the best informed decision possible. Let’s take a look!

Generally, low wall mounted air conditioners are often the best choice when it comes to conservatory air conditioning. As a result of the large amount of glass used in conservatory construction, several conservatories don’t have full sized solid walls. Consequently, specialist low wall mounted units can be installed quite easily. They tend to be a bit more costly than the conventional high wall units, however they’re able to offer an impressive solution to resolve the problem. What’s more? Low wall mounted air conditioning systems are also visually appealing because as with radiators, they are positioned out of your line of sight in such a way that complements the room.

NO - as air conditioning systems use fluorinated gases as refrigerants, all work on them must be done by professionals holding valid F-Gas certification. There is a range of different qualifications and certifications that apply for this, so it's always best to ask someone who is qualified to do this.

One of the major source of concern for several home and property owners in London when it comes to heating and cooling systems is whether its really necessary to use an air conditioning system throughout the year or just a couple of months a year. Well, if you’re also worried about the this, then you’ve come to the right place. In this post, we’re going to consider why making use of an air conditioning system is essential all-year round. Let’s take a look!

The short and simple answer to this question is, it depends. However, if you really want to have a total control over your own comfort at home, then the answer is yes. In fact, most individuals who have installed heating and cooling systems with the intention of only using it in July and August usually find themselves making use of it all through the year and having a more sound sleep than ever before. What’s more? London is known to have uncomfortable and inconsistent temperatures all year long. If you intend to use your system for a specified couple of months, you may just be shocked to discover when you’ll need it the most may be outside your selected usage period.

In a move to protect older properties or an apartment complex, most landlords in London usually won’t give permission to enable structural changes. As a result, this has given several Londoners the impression that they’ll have to just cope with the heat and cold all throughout the year. In this kind of situation, all that’s needed is the installation of internal air conditioning units which does not need any penetration through the exterior wall to be fitted.

It can be quite tricky knowing the right time to purchase and fit an air conditioning system, however if you get the timing right, this can go a long way to help you save both time and money. It’s important to note that different individuals usually have varying needs - like it it’s possible your existing unit just broke down during the summer months or you’re carrying out some renovations during spring.

In general, there’s the need to put a couple of factors into consideration in order to make sure you AC installation is a hassle free experience. The best time to install an air conditioner is actually before the construction of the house. Several high set homes do not possess the space to fit fully ducted air after building. And even if there’s space, accessing the ceiling and down into the floors can be pretty expensive and difficult.

Installing an air conditioning unit earlier would mean less plaster would be required later down the road. A good air conditioning installer or HVAC expert should also advice you on the best location for the unit in order to help you maximize cooling in the summer and heating in the winter. Most importantly, if your AC unit is built into your house’s design, you’ll be able to save more money in the long run. However, you may not be able to fit a unit when constructing or renovation, therefore choosing the right time would be a question of, when is the right time of the year.

Generally, choosing a month in the off-season is actually a much better time to fit an air conditioner, but ensure that it’s the right time. Overall, the best time for an air conditioning unit installation is autumn when the demand is at its lowest. Since retailers are usually overstocked with units after the summer months, you can get yourself some nice discounts

Also referred to as Freon, the refrigerant “R22 is a commonly used chlordiflouromethane that’s usually incorporated in air conditioning systems as well as many other refrigeration applications. However, because of the evidence discovered which shows the gas can contribute to the damage of the ozone layer, the refrigerant has now been banned since Dec 31, 2009 as it became legally required that any system making use of R22 and became faulty must be replaced.

Generally, R22 owners in commercial applications are now responsible for checking for leaks, record keeping as well as labelling of equipment using this type of gas. Failure to comply with these directives can lead to hefty fines.

Existing refrigeration and air conditioning equipment that makes use of R22 can still be used. However, the owner of the equipment will be denied any rights to purchase extra tanks of gas that’ll keep the equipment running. In the event whereby an air conditioning system requires a complete recharge of the R22 refrigerant, according to the law, it’ll be considered obsolete and therefore will have to be replaced. What’s more? As the remaining supplies of R22 starts to decline, the price of getting the refrigerant is expected to skyrocket. As a result, do not be shocked if the cost of purchasing more R22 to keep your current equipment running outweighs the cost of replacing your existing equipment with a new and environmentally approved one.

As R22 is gradually being phased out, there are new ozone friendly alternatives which are being introduced into the refrigerant market. Out of these alternatives, the most common one is the R410A, which is purely a combination of hydrofluorocarbons which does not deplete the ozone layer.

As the name suggests, these are air conditioning units that are specifically designed to be installed indoors. Unlike the conventional air conditioning system which involves installing a rather unattractive box on the outside of the building, internal air conditioning units are full fledged AC system which doesn’t involve having to make penetrations through the external walls. This could be as a result of the weather proof nature of the building or any other exterior skin features which acts as a restriction and makes the installation of a traditional air conditioning unit on the outside of your building simply illogical.

So how exactly does internal air conditioning units work? Well, most systems features the following components:

• The fan coil or room unit which is retrofitted high up on the interior wall of the room in question. Although, it can also be fitted into existing fittings as a concealed ducted unit during a refurbishment which makes it look a lot more attractive than the first option.
• The refrigeration pipe work then runs from the unit hidden behind the walls or ceilings, to the condenser box. The condenser box is usually the part that goes outside. However, it’s still installed inside the systems, mostly in a concealed space such as under the kitchen counter.

The benefits of installing internal air conditioning systems include the following:

• They are smart systems which is fully controllable with WiFi
• They filter the air, sucking dust, pollutants as well as other allergens from your building
• They most possesses some exciting features like the blackout technology as well as the i-Feel temperature control
• They’re just as effective in cooling and dehumidifying as any traditional air conditioning system.

What Is Central Air Conditioning System?

Central air conditioning system is a system which operates by cooling air at a central place and distributes the cooled air to and from rooms with the help of one or more fans and ductwork. What makes the whole idea of air conditioning feasible is the operations of the air conditioner compressor. When it cooling gas is compressed, it allows it to absorb heat from the house and blows it outside into the outside air and that’s exactly how the cool air is being generated.

Central air conditioning are of two main types which includes a split system as well as a packaged unit.

Generally, in the split system AC unit, both the condenser and compressor are included in the outdoor metal cabinet, whereas the indoor cabinet includes the evaporator. Typically, in several split system air conditioning units, the indoor cabinet will also include an air handler or a furnace. What’s more? The evaporator coil of the AC unit is fitted in the cabinet or the furnace or heat pump’s primary supply duct. This type of central air condition is usually the most economical AC unit to fit if you already have a furnace in your home.

However, in a packaged central air conditioning system, the components including condenser, compressor and evaporator are all included in one cabinet. Supply of air as well as the return ducts are connected through the home’s exterior wall or roof to the package central air conditioning system - mostly placed outdoors. This type of central air conditioners also features electric heating oil or a natural gas furnace. With this perfect blend of central heater with air conditioner, there’s simply no need to a separate furnace indoors.