Find an Air Conditioning Engineer you can trust in Boston.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

There are a range of air conditioning units on the market. You should be sure to choose one with the appropriate cooling output for the room where it will be placed. Professional air conditioning companies will be able to advise you of the most suitable units for your rooms.

It can be quite tricky knowing the right time to purchase and fit an air conditioning system, however if you get the timing right, this can go a long way to help you save both time and money. It’s important to note that different individuals usually have varying needs - like it it’s possible your existing unit just broke down during the summer months or you’re carrying out some renovations during spring.

In general, there’s the need to put a couple of factors into consideration in order to make sure you AC installation is a hassle free experience. The best time to install an air conditioner is actually before the construction of the house. Several high set homes do not possess the space to fit fully ducted air after building. And even if there’s space, accessing the ceiling and down into the floors can be pretty expensive and difficult.

Installing an air conditioning unit earlier would mean less plaster would be required later down the road. A good air conditioning installer or HVAC expert should also advice you on the best location for the unit in order to help you maximize cooling in the summer and heating in the winter. Most importantly, if your AC unit is built into your house’s design, you’ll be able to save more money in the long run. However, you may not be able to fit a unit when constructing or renovation, therefore choosing the right time would be a question of, when is the right time of the year.

Generally, choosing a month in the off-season is actually a much better time to fit an air conditioner, but ensure that it’s the right time. Overall, the best time for an air conditioning unit installation is autumn when the demand is at its lowest. Since retailers are usually overstocked with units after the summer months, you can get yourself some nice discounts

When getting a new air conditioning system, it’s essential to always go for one that’s energy efficient, otherwise you’ll end up paying more money on your heating and cooling bills than necessary. Over the years, a variety of air con units have been developed which ultimately makes it a bit tricky trying to separate the “the boys from the men. Not all are created equal and most home and property owners who do not take the necessary measures and put certain things into consideration when buying a new AC system often go back home with the most visually appealing unit rather than an energy efficient one.

When purchasing a new energy efficient system, there’s a need to look out for some things that can go a long way to help keep your heating bills and your home’s temperature low. Let’s take a look!

• Get the appropriate size for your space. One of the biggest mistakes you can make when buying a new air conditioner is getting the wrong size. A unit that’s too small will have to work overtime to achieve the set temperature for the room and driving up your energy bills, while a unit that’s too large will cool the air pretty easily and quickly but leave it damp and clammy.
• Energy saving setting. Always look out for this feature when buying a new unit. This allows the unit to turn off both the compressor and the fan once the space has been cooled off which in turn helps you conserve energy.
• ENERGY STAR® Certification. When deciding on the best air condition for your home, always look for the blue ENERGY STAR® certification. This implies that the unit has met or exceeded certain higher efficiency standards than other similar models.

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

In a server room, you have multiple electronics in a single room. If you stand a bit close to your personal computer while its still running, you know you’ll definitely feel some heat. Now imagine the amount of heat that would be generated by large servers in a single room (hint: it’s quite much). A server room would be highly uncomfortable to work in with that amount of heat around and beyond that, the heat is also very dangerous to the electronics. It can lead to equipment malfunction or even breakdown. When the equipment in your server room is one that stores all your business’ information, then it’s simply a no-brainer to do everything you possibly can to protect the equipment. Hence, the reason why every server room requires a good and well installed air conditioning system which helps to control temperature as well as moisture in the server room. It also goes a long way to control the amount of dust in the room and dust can also affect the performance of the electronics. Here are some of the reasons why the HVAC system in your server room should be professionally installed.

• The quality is guaranteed. Compared to when the installation project is made a DIY task, a professional installer is able to guarantee a better quality result. They possess the necessary experience, knowledge, tools and skills to make the project a successful one and highly satisfactory.
• They offer technical advice. When you hire a professional HVAC system installer, you also get free advice on a bunch of relevant technical topics and lots more.
• They often offer maintenance guides and after installation support. Companies that are committed to customer service and utmost satisfaction will often provide maintenance guides and technical support post installation. They also give you the opportunity to leave a feedback based on your experience so they can improve on their service delivery.

There are a wide range of ways in which having an answer to this question can help home and property owners. For instance, this can help you predict the cost before fitting a new unit. However, regardless of your purpose, this guide has been created to give you an idea of the energy usage that’s associated with different types of air conditioners. Let’s take a look!

First and foremost, it should be said that there’s no straightforward answer to this question as there a number of variables that can affect the energy efficiency of one’s air conditioning unit. As a result, the calculations for your personal space may vary from the estimates you’ll see on the internet. For example, the type of air conditioner you choose to install will be a key determinant of your system’s energy usage.

• On the average, a central air conditioning system incorporates within the range of 3000 and 3500 watts per hour during the summer months. However, if you happen to operate the “fan only mode of your central air conditioning unit, the energy usage will most likely drop to about 750 watts per hour.
• For a mid sized portable air conditioning unit, you can expect the system to consume an average of 2900 watts per hour. However, large units as you would have expected would exceed the energy usage of central air conditioning units, this can be up to 4100 watts per hour.
• For a mid sized window air conditioning unit, this will consume about 900 watts per hour. While you can expect the smaller unit to use about 500 watts per hour and the larger ones to consume about 1440 watts per hour.

Air conditioning filters can get dirty over time, especially through heavy use. This can have a major impact on how efficient a unit is, increasing how much energy it uses and reducing how effective it is.

This is why it’s a good idea to service your air conditioning system regularly. Part of this should involve checking, cleaning and replacing your filters, to help your units run as efficiently as possible.