Find a Shop Fitter you can trust in Ballynahinch.

You’ve got to admit it that nothing feels better than knowing your house is spotlessly clean and safe. But even at that, only a few truly have the time to scrub, sanitize and clean their living space from top to bottom. If you don’t have the time or aren’t confident enough to tackle this task, then we’d high recommend you get in touch with a professional who can guarantee the best results to ensure your residential space is looking spick-and-span and totally safe. In this guide, we’re going to walk you through a few home cleaning tips if you’d prefer to handle the task by yourself. Let’s take a look!

• Stock up on supplies. Regardless of your home’s size, there’s a need to get the right products for a successful outcome. For a great result, you’ll have to take an inventory of your cleaning supplies and identify the tools that needs to be replaced such as old sponges, dusters, mops and the likes.
• Start by dusting away dirt. Use a microfibre cloth to wipe clean both obvious and forgotten areas around the house like the top of doors, fans, light fixtures and more. For the stubborn messes that just won’t come off easily like on the kitchen counter or stove, you can introduce baking soda especially in the kitchen area.
• Take on the bathroom. No one likes cleaning the bathroom or toilets, however the cleanliness of your entire house largely depends on how clean your bathroom is, so can as well do it well.
• Vacuuming. Vacuum the stairs, upholstered furnitures and the likes to ensure your home is spotlessly clean.
• Treat the floors properly. This involves sweeping, mopping and treating the floor, in that order.

Being smart critters, a rodent infestation of a garden can cause the owner a lot of problems. Rats are pests bringing about a wide range of health hazards. They’ll camp in your compost, eat away your fruits and vegetables, gnaw through fences, containers and planters and even spread harmful diseases to humans. The wild rats can bite or even scratch when approached and will seek shelter anywhere possible like in your greenhouses, shed and even in your home. And worse still, they reproduce quickly as a female rat can give birth to six litters annually with up to 12 pups. Therefore, if left unattended to,an unwelcome visit can soon become an infestation in next to no time.

In order to get rid of rats, you can start by thinking like one. Like any other mammal, they need food, water and shelter to survive and thrive. Removing one or all these three things can effectively help you get rid of rats in your garden. Generally, there are several ways to get rid of rats which can be natural without the use of poison and artificial, with the use of poison.

If you wish to use the natural approach, you can try using peppermint oil or laying of traps. Rats are known to hate peppermint and it’s also alleged to mask their pheromone trails. Simply soak cotton wool balls in peppermint oil and position them strategically through out the garden. The second natural approach is more of a trial and error case as rats are always very suspicious and it’s possible your traps fail to catch any unless you’re very cunning with the placement.

The most effective method is, however, the use of poison to get rid of rats. Simply mix the poison with food in small quantities and place at strategic locations throughout your garden to get rid of the rats, However, this must be done with great care.

How To Replace Flat Roof Felt

Also referred to as tar paper, roofing felt is installed underneath the roof’s shingles to help deny water access to your home. Installing the roofing felt in overlapping layers builds a water barrier in situations whereby the weather damages or blows away the shingles. Although the application of a roofing felt on a flat roof is relatively easier and safer than working on a peaked roof, it’s advisable to take enough care and precautions. If you lack proper training and experience for this task, we’d recommend you employ a reliable professional to guarantee the best results and save you from further headaches especially in cases whereby unfortunate errors are made. This step by step guide will give you a good insight into the flat roof felt replacement process.

• Take a measurement of the width and length of the roof.

• Calculate the square footage by multiplying the numbers.

• Multiply the square footage gotten by three (it’s advisable to install three layers of roofing felt to create a really strong weather barrier).

• Use a claw hammer to remove the existing roofing felt.

• Use utility knife to cut the new felt to fit the length of the roof.

• Place the first piece along the roof’s edge and use a hammer tacker to tack the felt in place with staples or galvanized nails and hammer.

• Put the staples or nails at every 6 inches along the side touching the roof’s edge as well as down the short sides.

• Repeat the same process for the second piece, laying it out beside the first row of felt.

• Cut a piece of felt to the appropriate length using a utility knife to begin the second layer of roofing felt, and cutting it in half, lengthwise.

• Apply construction adhesive along the first row using a trowel.

• Press the first piece for the second layer onto the adhesive. Repeat this process until the roof is covered with a second layer

• Apply construction adhesive over the second layer to install the third layer. Begin with a full piece of felt without cutting it in half.

• Overlap each piece by 2 inches until you’ve completely installed the third layer.

1. Using a rubber mallet and a strong pallet knife, remove the beading around the window. You might think they’re part of the frame, but they’re actually separate on the inside of the frame and can be taken out by using pallet knife to prize them out. Start with one of the longest beads first and leave the top bead until last.
2. Give the glass a little tap to loosen it if it doesn’t come out straight away, then the whole unit should slide out easily. Just make sure it falls towards you and not back out onto the ground below!
3. Clear any debris that has found its way into the frame with a brush. Add spacers at the bottom of the frame – these could be pieces of plastic.
4. Get your new sealed unit (make sure you measure the glass before you buy one so you know which size to get) and carefully take it out of the packaging. Look for the British Standard mark – that shows you the bottom of the glass.
5. Lift the glass into the frame, starting with the bottom first, and make sure that it fits square in the frame before taking the spacers out.
6. Use a little washing up liquid to spread along the beads to make it easier when you slide them back into the frame. If they simply push and clip back in, you can use something like a block of wood to help you push them in correctly. Put them back in reverse order to how you took them out.

Working with a designer to plan your kitchen means you’ll get the best possible use out of the space and it maybe that wasted space can be put to good use. Designers can offer you lots of space saving solutions and innovative kitchen units, making your kitchen a truly functional area.

Builders are everywhere, but finding one for your project can be tricky and stressful, with both cost and reliability coming into question. This is even more worrisome when you’re fully aware that your house extension can only be as good as the builder. If you’re also facing the same challenge, then you’ve come to the right place. In this article, we’ll share with you some tips on how to choose a professional and reliable builder who’ll ensure you get immense value for every penny spent. Let’s take a look!

✓ Ask for recommendations. To find a tradesperson, not just a builder, personal recommendations is the best way to go. Building a house extension is a major undertaking which comes with a lot of costs, so if you’re going to do it the least you can do is ensure you do it right. Carry out your research, ask friends and family, neighbours and loved ones if the know of any reliable builder in the local area. If they’ve have one they’ve used, you can request for the cost, quality of the job done, the duration of the project and any other detail you feel you should know.

✓ Search Online. Use our search feature to look at the builders available or submit and enquiry and we will find you one. Our site holds details of numerous builders and building companies which you can go through their ratings to select the best.

✓ Select a reliable builder from trading association. Most reliable builders are usually a member of a recognized trading association or the other. Though this is not obligatory for builders, but it can be used as a dependable medium to find a good builder. We list what trade association the builders are a member of.

Apart from the cost of hiring a skip, the area in which to place the large item is another major concern for individuals looking to hire a skip. So if you’re wondering whether you can place your hired skip on the road, there are four legal requirements that applies and must be complied with for your protection in the situation whereby a third party accident takes place. Deciding to overlook these conditions can lead to a fine or forceful removal of the skip by the local council.

Here are the compulsory legal requirements that must be fully complied with:

• Get A Permit

The local council gives out a permit for skips to be placed on the road. This permit must be acquired and the cost may vary depending on the local council in your area.

• Illuminate The Skip

Since the skip is to be placed on the road, then it’ll only make sense to have it illuminated at night or in low lighting situations for safety of all road users. According to the law, lights must be positioned at each end of the skip to be easily spotted.

• Use Cones

According to the law, a minimum of two (2) cones must be placed on the skip’s approach side for the protection of all road users.

• Comply With The Skip Requirements

You can’t place just any skip you like on the road. By the law, there are certain conditions that must be met by the skip itself before placement. It must be painted with the yellow colour on the sides, have both the owner’s name and phone number clearly written on it and must also possess a BS AU152:1970 complying red and yellow fluorescent reflective marking which is compulsory to be acquired within two (2) working days upon filling.

Click here to learn more about skips.