Find a Shop Fitter you can trust in Woodhall Spa.

Having ventilation in the roof void is a requirement for building regulations approval. Fitting ventilated soffits is the typical way that this roof ventilation is achieved. If you do not have roof ventilation, you may find that your roof void has problems with condensation or overheating.

Yes, bricklayers can work during the cold months, but it all depends on the type of work involved. For instance, residential housing maintenance works such as tuck pointing deficient mortar joints on exterior walls and columns as well as rebuilding of chimneys are best tackled during summer or simply put, the warmer months of the year. This is is mainly because the best results for these activities are achieved in the warmer months and several bricklayers will agree to this fact.

Mixing of mortar using anti-freeze technique to counter-act the effects of a cold weather can lead to white marks trailing down the brick when warmer temperatures comes knocking. As a result, even mortar mixing should be done at temperatures exceeding zero degree farenheit which will hold no serious consequences if the temperature should change to a little bit below the norms. During the winter, a good technique that can be incorporated to when mixing mortar would be to mix them in smaller quantities in a warmer environment. These small quantities will immediately be fed by the labourers to the bricklayers and in such circumstances, the mixed mortars will not be subjected to a freezing temperature for too long.

Generally, it would be very unwise to consider any bricklaying work to be done whenever the temperature jumps to a certain level which would be considered to be very inconvenient to work in. Interior works like remodelling of fireplaces can be tackled so long there is a warm space to mix the mortars while also keeping the materials at an indoor temperature. Bricklaying works that have, however, been completed during the colder months should be subjected to a very close inspection as well as looking for potential damage that can be caused to existing works as a result of the harsh weather.

How To Repair Sunken Concrete Driveway

If you have concrete driveway that’s cracked, uneven and mostly especially sunken, you’d know how distasteful it can be just viewing it on your property. A sunken concrete driveway is most likely caused by rainwater erosion removing the soil under it or a big root under it which as rotted over time. Another possible cause of the sunken concrete is an improperly prepared base which implies that the soil beneath wasn’t fully compact when the concrete was poured on it. Later on the soil beneath will eventually settle and shift below the concrete driveway which weakens the integrity of the entire driveway, making it more vulnerable to cracks, unevenness and sunken.

Two ways in which you can fix this problem includes either demolishing the whole driveway, re-compact the soil underneath and fill with new concrete or repair the entire driveway using an easy process called slabjacking. In this article, we’re going to look at the slabjacking repair process as it’s significantly less expensive than the demolishing approach and will also cause minimal disruption to your lifestyle.

Also referred to as mudjacking or concrete lifting, slabjacking is simply a process used to float your existing concrete back to its original position. If you are not a competent DIYer or lack confidence to pull this off, we’d recommend reach out to a professional for help. If otherwise, then you can practice the slabjacking process given below.

✓ Drill holes through the slab.

✓ Pump grout mixture through the holes. This mixture will spread out beneath he driveway and raise it up.

✓ Lastly, fill the holes and level the concrete driveway surface.in such a way to hide the signs of the repair made.

This is a process that works to efficiently get your driveway back in a top condition relatively quickly.

1. How to build a shed base out of paving slabs
   • Mix sand and cement together to make mortar or use a pre-mixed one
   • Use a trowel to lay mortar for 1 slab at a time on the sub-base and lift a damp-sided slab onto the mortar, using a piece of timber and club hammer to tap the slab into position carefully. Continue to lay the first row of slabs
   • Make equally-sized spacers in all the joints in the slabs to ensure they’re the same size, checking it’s level as you go along
   • Next lay slabs along the two adjacent outer edges, filling in the central area row by row
   • Leave the mortar to set according to the instructions or for at least 48 hours before filling in the joints with mortar or paving grout
2. Building a shed base from concrete
   • Create a wooden frame around your shed base area (also called formwork) to stop the concrete from spreading
   • Mix pre-mixed concrete with water or use 1 part cement to 5 parts ballast
   • Wet the sub-base using a watering can with a rose on the end
   • Pour the concrete onto the framed base starting in one corner
   • Push the blade of a shovel up and down in the edges of the concrete to get rid of air bubbles
   • Use a rake to spread the concrete, leaving it around 18mm higher than the top of the frame. Work in sections of around 1-1.m²
   • Compact the concrete using a straight piece of timber that’s longer than the width of the base. Move the timber along the site, hitting it along at about half of its thickness at a time until the surface is evenly ridged
   • Remove excess concrete and level the surface by sliding the timber back and forwards from the edge that you started. Fill in any depressions and repeat until even
   • Run an edging trowel along the frame to round off exposed edges of the concrete and prevent chipping
   • Cover the concrete with a plastic sheet raised on wooden supports to allow slow drying. Weigh it down with bricks
   • Once the concrete is set, you can install your shed and remove the wooden frame with a crowbar

The cost of just the engineered wood flooringis from £18 to £73 per m2.

Does A Single Storey Extension Add Value To Your House?

When you’re looking to construct a single storey extension or perhaps you’re just searching for means to increase the value of your property, this question always pops up. The short and simple answer to this question is a resounding yes, a single storey extension can go a long way to increase the value of your property. Just like any other home improvement, when done right, adding a little extra living space is one of the top things you can probably think of that’ll provide a cool increase in your property’s value. However, before you rush in you must also take note of some factors so you can be certain a single storey extension is the right option for you. These factors include the quality of the build, complexity of the build, cost of the build versus the value gain, ceiling price in the area, finance costs as well as the inconveniences and stress.

Generally, the average cost of a single storey extension can range from £34,000 to £37,000. For this price, you should get a standard sized rear or side extension which also includes the cost of a kitchen - it’s the most commonly use for a single story extension especially in the UK. So it’s important to know the value they’ll add to your house before deciding to make such an investment.

The value added to your property will depend largely on the quality and size of your single storey extension. The value is usually calculated by estate agents using the number of bedrooms, bathrooms as well as the floor area. Inside London, it’ll typically be priced at £5,000 to £10,000 per square metre, while outside London should be within the range of £900 to £2,000 per square metre.

If you’re looking to purchase and install an air conditioning system in your home or property, what immediately comes to mind is the type to invest in. When it comes to air conditioners, the available choices are numerous - from window units to central air conditioning, through-the-wall air conditioners, portable air conditioners, ductless split system, package terminal air conditioners, swamp coolers as well as geothermal cooling systems. In this post, we’re going to consider the various type of air conditioners in order to help you make the best decision moving forward. Let’s take a look!

• Window air conditioners. These are the most popular type of air conditioners which are typically mounted in a window. They possess an exhaust system which pushes hot air out the back and sides while the refrigerant cooling is pointed indoors.
• Central air conditioning. This is the most effective form of air conditioning if you happen to own a large home and want all rooms cooled at once.
• Portable air conditioners. Just like window air conditioners, these are self-contained air conditioning systems. In other words, portable air conditioners have all their essential components in one appliance just like in window air conditioning units.
• Through-the-wall air conditioners. These self-contained units that operates by bringing in warm air which is then exhausted while they send cool air back into the room ( similar to window air conditioners).
• Ductless split system air conditioners. Just like the name suggests, these are two-part air conditioners that are able to cool various areas within a home.
• Package terminal air conditioners. These are the type of air conditioners that are mostly used for cooling in commercial spaces like hospitals, hotels and the likes.
• Evaporative or “swamp” coolers. Although these aren’t as common as refrigerant air conditioners but they are just as effective. While conventional air conditioners make use of a refrigerant known as Freon, swamp coolers only incorporates air and water to function.

Home security alarms discharge their duties following a simple concept - ensuring all entry points into the building are secured. This is done through the placement of sensors at all possible points of entry. These sensors, in turn, detects all possible breach in security and relays the information to either the control panel or the command centre situated somewhere in the building.

The usual spots where the sensors are installed includes the doors, windows (especially the easily accessible ones at the ground level) and any other possible entrance into and from a house. Meanwhile, motion sensors can also be incorporated to secure the open spaces inside the home.

Here are the important components of a home security alarm:

• The Control Panel. This basically controls the entire security system. It can activate or deactivate the alarm by communicating with all installed components. In the event whereby there is an intrusion, it automatically triggers the alarm and raises the awareness of an alarm monitoring company. It normally comes with a touchpad which allows for easy interaction and settings to activate/deactivate the alarm system. The control panel can also operate on voice commands and can be set to work using key fobs (also known as wireless remote controls).

• Door & Window Sensors. These comprises two parts which are to be placed in adjacent positions to each other - on the door/window and the door frame or window sill to generate a security circuit when the door/window is shut.

• Motion Sensors. These sensors are used to protect an open space which cannot be breached without the alarm going off.

• Surveillance Cameras. Think of them as the ‘eyes’ monitoring the secured zone. They come in both wired and wireless configurations and can be remotely accessed on Smartphones, Tablets and PCs.

• High-Decibel Alarm. Alarms often serve two great functions. They are often loud enough to alert both occupants and nearby neighbours, but also shrill enough to send the intruder running.

• Yard Sign & Window Stickers. They may actually act as a marketing medium for alarm companies, but they are also sending an indirect message to potential intruders telling them to reconsider their intended illegal activity as the property is professionally protected. Click on the link to learn more about home security alarm systems - https://alarm.quotatis.co.uk/3-ways-home-security-systems-keep-safe/