Find a Shop Fitter you can trust in Thirsk.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

As the heat start to come up especially during the summer months, the swelter will mercifully be kept in check by air conditioning. The technology has made a significant impact on modern life and it can now be considered a norm for all new and modern homes. So if you’re also planning to fit new HVAC air conditioning systems in your home or property, you may also be interested in knowing exactly how it works. In this article, we aim to provide you with an in depth insight into how air conditioning operates. Now let’s take a closer look at the process!

✓ A grille at the bottom of the machine absorbs warm air from the room

✓ The warm air is transmitted over some chiller pipes through which a coolant fluid is circulating. Working in a similar fashion as the chiller cabinet in a refrigerator, this part cools down the transmitted warm air and any excess moisture is duly removed by a dehumidifier.

✓ The air is then transmitted over a heating element which is quite similar to the one present in a fan heater. On a cold day, this part of the unit can be turned up in order to allow the HVAC works as heater.

✓ A fan which is positioned at the top blows the air back through another grilled into the room.

✓ Coolant flows through the the chiller pipes. In the process, it carries heat from the air blowing past the pipes and then it evaporates - converting the cool liquid into a hotter gas. This heat is then transported to the outside of the building from inside the room.

✓ With time, the heat inside the building slowly blows away into the outside air.

1. Calculate the surface area for your decking Multiply the length (L) of your decking area by the width (W): L x W = Decking Surface Area (DSA) in m² 10 x 6 = 60m²
2. Work out the coverage of your deck boards Add your deck board width (DBW) to the expansion gap length (EGL), then add the deck board length (DBL) to the expansion gap width (EGW). Then multiply these numbers. (DBW + EGL) x (DBL + EGW) = Single Board Coverage (SBC) 0.144m + 0.005m = 0.149m 2.4m + 0.003m = 2.403m 0.149 x 2.403 = 0.358m²
3. Calculate the number of deck boards you need Multiply the SBC by 1.1 to allow for 10% wastage. Then, divide the DSA by the SBC. DSA / SCB x 1.1 = Total number of boards required 60m² / 0.358m² x 1.1 = 184.36 boards – so round up to 185 so you’re not left short.

Do Locksmiths Need A License?

If you’re in the UK, the simple answer to this question is no. The locksmithing industry in the country is an unregulated one by the United Kingdom’s government. Ultimately, this implies that anybody can be a locksmith with their competence, background or motive being irrelevant. Areas in the security industry that are licensed by the government include door staff as well as keyholding businesses, with the government overlooking the locksmith industry as they do not want to heighten the legislative burden on small businesses.

There are a number of implications for an unregulated industry such as the locksmithing industry. This includes:

• Anyone can wake up in the morning, pick up a set of tools and call themselves a locksmith without being termed as illegal.

• The fact that the industry is not regulated means that there’s no price structure to follow. There’s no price guide for locksmithing services, so they are free to charge whatever price they wish to. As a result, the price of a locksmith can greatly vary from the other for the same or similar tasks.

• Irrespective of your background, competence or motive, you can decide to trade as a locksmith.

Although there are about 6,500 locksmiths in the UK that are not licensed, we do have about 350 plus MLA approved locksmiths. Being MLA approved means they’ve been fully vetted, inspected and fully qualified to operate as a professional locksmith.

The Master Locksmith Association ( MLA) possesses its very own licensing scheme for MLA approved companies. This means that the locksmithing businesses that are listed on the Master Locksmith Association’s find a locksmith page and incorporate their official logo are being inspected on a regular basis, have been vetted by using the standard level DBS checks and have passed the exam based proof of competence test.

When enjoying your home to the fullest gets hindered by your staircase, getting a stairlift is definitely a great option to put into consideration. If you’re wondering exactly how stairlifts work, then you’ve come to the right place! In this post, we aim to give you a detailed information of stairlifts’ operating process. Let’s take a look!

First and foremost, it’s important to state that all stair lifts possess three main components which includes the rail, the seat as well as the drive system ( also referred to as the carriage which powers the chairlift ). Using a stairlift is pretty easy, all you need to do is sit on the seat, fasten the seatbelt and push the rocker switch located on the seat’s armrest. Once done, this will make the stairlift move smoothly up the rail.

Generally, stair lifts possess a soft start or stop to make sure the chairlift glides gently from the beginning to the end of the staircase. If you want to stop the stair lift, all you have to do is to let go of the rocker switch and the unit will automatically stop moving. After the stair lift has gotten to the end of the staircase, simply pull up a level present on the seat’s side. This will make the stairlift’s seat smoothly swivel 90 degrees and locks itself in place to make for an easy exit. What’s more? Most stairlift’s seat, arms and footrest can be folded when not in use to make sure there’s enough free space along the stairs.

How To Remove Old Exterior Paint

When the paint of your house is starting to peel, there’s the need to take a swift action. While some homeowners opt to cover it with vinyl siding or replace it with fibre cement siding, there’s no reason why you would want to hide the exterior of your house if it still looks great. When you don’t want to hide the beauty of your exterior, the only other option you’ve got is stripping or removing of the old paint. So how do you remove old exterior paint without much hassle? Let’s take a look!

✓ Propane blowtorch. Due to its affordability and effectiveness, this blowtorch has been one of the most popular means of removing old exterior paint amongst homeowners for quite some time. It makes use of high heat to soften the acrylic-latex paint which makes it easy to peel off with a putty knife. However, it can also be very risky to use as it’s always a dangerous game when it comes to open flames. What’s more? Applying an open flame to lead-based paint may release toxic lead fumes, therefore you’d have to be very careful if you wish to use this method.

✓ Electric sanders. Belt sanders are a great option to removing old exterior paint as they’re able to strip off the paint quickly. However, this must be done gently and carefully as you’d risk gouging the wood if you lay into the sander too hard. The problem with this method is also lead-based paint as the sander tends to convert everything to dust and direct them straight to your face, hair and lungs.

✓ Scrapping. This involves using a sharp, rigid putty knife or blade designed for painting scraping to strip the exterior paint. This method also involves dust but you’d have a better control over it than the sander.

Most companies will recommend that exterior painting and decorating is carried out in the summer months. However, advances in paint technology mean that some paints can be applied in low temperatures and even when it’s raining. Check the can for the best conditions in which to apply or ask a professionals advise.