Find a Shop Fitter you can trust in Nottinghamshire.

Gravel, asphalt, concrete and paving can all be permeable. However, some types of asphalt and concrete are impermeable. This is why it’s important to be precise about what material you want for your driveway. If you want a permeable driveway, you should also make sure that your sub-base is also permeable.

The cheapest fence to install is, generally, a pressure-treated pine wooden fence at around £20 per linear foot. This includes the materials and labour costs. Wire fencing is technically cheaper at around £5 per foot, but it’s not a great material to use in homes as it looks unsightly and doesn’t provide any privacy.

A big benefit to concrete is that you can paint it, making it easy to customise and coordinate with your outside area. However, it’s easy to resurface it too, so if you change your mind or inherit a patio that’s the wrong colour, you don’t need to worry.

Start by cleaning the surface with water and a brush. If you come up against any tough stains, you might need to use a detergent and water mix to remove them. Then you can prepare your resurfacer.

Generally, it’s best to apply resurfacer to a moist surface, although make sure you follow the instructions on the specific product you buy. You’ll need to mix the resurfacer with water, then pour and spread it on with a trowel or brush. You might need to apply multiple coats, and can add texture if you want to make the surface more grippy.

Ensure you protect any expansion joints in your patio with duct tape or weather stripping to stop the resurfacer from filling them in. You can also add a colour agent to your resurfacer before you apply it if you’d like to customise the colour.

If you’re considering rendering your house or property, then you’d most likely want to know whether or not applying for a planning permission will be needed. In several cases, planning permission will not be required for the maintenance, repair as well as replacement of the existing render on your building. These activities are covered by what’s called “Permitted Development Rights, which allows you to carry out some activities without having to apply for a planning permission but always subject to following some strict guidelines. For rendering, as long as the material (render) possesses an identical appearance to those existing on the house as well as same colour, then you will not require a planning permission. However, there are a number of projects that have been highlighted in which a planning permission would be required. These includes the following:

✓ Re-rendering in a colour that different from the original one used on the house or building.

✓ Rendering over brickwork which was not originally covered.

✓ Rendering over pebbledash

✓ Removing pebbledash and replacing it with render.

Another exception to the Permitted Development rights are for houses in conservation areas, national parks or areas of outstanding national beauty.

Although, you wouldn’t normally require to submit a planning application for approval before you apply render, but in truth it’s actually a bit of a grey area which isn’t totally clear and doesn’t allow for much freedom or creativity. And due to this fact, homeowners who wants an absolute peace of mind may opt to apply for planning permission just in case. It’s also worth noting that whether or not a planning permission is required, a huge rendering work will need to comply with building regulations which includes the need to insulate walls on the inside or outside as part of the work on several older properties .

Asbestos is a perfect example of a silent and hidden killer. The harmful fibre it releases is not only totally invisible to the eye, but also absolutely odourless, therefore can’t be smelt. As a result, you can walk into a room completely filled with asbestos and you still won’t suspect a thing. If you live in an old building ( built before the 1980’s) in the UK, it’s very possible that there’s some asbestos in the house.

Asbestos causes up to 5000 deaths in the UK on a yearly basis. When asbestos materials are disturbed, they release asbestos fibres, which when inhaled can result in lung cancer, asbestosis as well as mesothelioma which are all painful and fatal diseases. And perhaps even more importantly, you won’t notice any symptoms of having these diseases until after several years after your first exposure to asbestos fibres.

Therefore, to reduce these numbers, there’s a crucial need to to know how to identify asbestos so as not to put both ourselves and loved ones at risk.

There are three types of asbestos which includes blue or crocidolite, brown or amosite, and white or chrysotile. So they can easily be identified by their respective colour names, right? Wrong! Asbestos fibres can not be seen with the eye, it can only be detected under a microscope. They’re very tiny and light, and once disturbed and in the air, they can float can days. Asbestos are commonly found in several building materials such as cement products, floor tiles, paints, adhesive, partitions, cladding, insulation, doors and lots more. With its wide acceptability in the past, any building product you can probably think of could contain asbestos.

Intruder alarm systems work in various ways and all with one goal in mind - ensuring the safety of both the building and valuables. Whether it’s a small or big home or property, there is a wide range of systems that can be installed to guarantee adequate protection from unwanted visitors. They work with various applications and you get to determine the action to be made in the event whereby the protected zone is violated and system triggered.

Intruder Alarm Systems come in three main types which includes:

• The Bells-Only Intruder Alarm System - Whenever there is a violation, the only action would be to trigger the alarm, nothing more.

• The Communicators - These alarm systems are basically speech dialers which automatically sends a message to various selected number whenever there is an intrusion.

• Monitored Systems - Here, the monitoring centre would be alerted once there is a breach in security.

However, irrespective of the type, most intruder alarm systems operate following a similar series of steps.

lSensing of motion. The systems usually feature door and window sensors which detects any contact of the door/window in the frame when shut. There are also the motion sensors which can be strategically stationed across the property to detect any motion and possible breach of security.

lTriggering of the control panel. The system is interconnected, and all components are linked to a control panel where all detectors’ and sensors’ generated informations are relayed. The alarm countdown is activated in the event whereby a contact is made and circuit impacted.

lSounding of the alarm - Once the alarm countdown has been initiated, failure to insert an abort code will ultimately sound the alarm. The external sounder that comes with the system produces a loud sound to notify people about the security breach or intrusion. There is also an interior sounder which works to bring the presence of an intruder to the awareness of the occupants.

lDeactivating the alarm. With the control panel, users can easily activate/deactivate the alarm system via a fob, code or selected smartphone apps. Click on the link to learn more about intruder alarm systems - https://alarm.quotatis.co.uk/3-ways-home-security-systems-keep-safe/

Replacement of roof tiles that have fractured, cracked or is missing is vital to avoid roof leaks and ceiling damage once rain and wind appear. Countering the problem swiftly by yourself is probable as long as it's only a few tiles. Charges for tile replacement can be expensive and fluctuate conditional on the company you hire.

The steps to replacing a tile are:

Ensure you have the right replacement tile as there are numerous different roof tiles on the market.

The most common types of roof tiles are concrete and terracotta. You must confirm that the tile is identical to your earlier tile or it may not work and can result in impairment even though you've tried to repair it. If you don't know what the tile is, ask the suggestion of a roofing supplier and they should be able to match it for you.

Get onto the roof.

It is only advisable to do this if the safety is guaranteed, using a steady ladder and maybe even using climbing ropes to protect you in case of a fall. If you don't possess a head for altitudes or you're sceptical about how safe it is for you to get on the roof, call in a professional.

Once you have securely gotten to the cracked tile, you'll want to somewhat lift the tiles that overlay the one to be detached. Do this by means of two pieces of timber to hold them up. Lift the broken tile over the baton with a brick trowel and gently slide it down.

Place your new tile on top of the brick trowel and inverse the steps to remove the tile.

Be certain to place the overlying tiles back into place.

Conduct a fast check across the roof to review any other possible damage. It is always advised to keep update on how the roof is holding out to keep an eye out for other tiles that might need replacing.